Additional Member System

The Additional Member System (AMS) is a voting system which uses semi-proportional representation in order that the makeup of the elected group more closely resembles the share of votes cast between different political parties than under non-proportional systems such as first past the post voting.

AMS is used in Scotland, Wales, the London Assembly, Hungary and Bolivia, and was used (in a modified format) in Italy.

Method of voting

In an election using the Additional Member System, each voter casts two votes: a vote for a candidate standing in their constituency (with or without an affiliated party), and a vote for a party list standing in a wider region made up of multiple constituencies. The constituency vote is used to elect a single representative in the voter's constituency using the traditional First-Past-The-Post system: the candidate with the most votes (not necessarily a majority) wins. The regional vote is used to elect multiple representatives from party lists to stand in regional seats, taking into account how many seats were gained by that party in the constituency vote, using a system of proportional representation: the number of seats a party receives will roughly reflect its percentage of the vote.

Voters are not required to vote for the same party in the constituency and regional votes. In the regional vote, the voter votes for a specific party, but has no control over which candidates from the party are elected. On the other hand, in the constituency vote, the voter votes for a specific candidate rather than a party. The Arbuthnott Commission recommended that Scotland change to a model where the voter can vote for a specific regional candidate as well, but this has not been implemented. With a similar model in Bavaria the second vote is not simply for the party but for one of the candidates on the party's regional list: Bavaria uses seven regions for this purpose. In Baden-Württemberg there are no lists; they use the "best near-winner" method in a four-region model, where the regional members are the local candidates of the under-represented party in that region who received the most votes in their local constituency without being elected in it, but this model has not been copied in the United Kingdom.

Calculation

In the model of AMS used in the United Kingdom, the regional seats are divided using a D'Hondt method. However, the number of seats already won in the local constituencies is taken into account in the calculations for the list seats, and the first average taken in account for each party follows the number of FPTP seats won.^[1] Similar systems are used in Wales and London.

In the Italian model of AMS, used from 1993 to 2005, for every constituency seat won by a party, that party's vote total was reduced by the number of votes received by the second-place candidate in the constituency, subject to the condition that the deduction cannot be less than either 25% of the total votes cast in the constituency, or the votes received by the winning candidate, whichever is less.

As in many systems containing or based upon party-list representation, in order to be eligible for list seats in some AMS models, a party must earn at least a certain percentage of the total party vote, or no candidates will be elected from the party list. Candidates having won a constituency will still have won their seat. In almost all elections in the UK there are no thresholds except the "effective threshold" inherent in the regional structure. However the elections for the London Assembly have a threshold of 5% which has at times denied seats to the Christian People's Alliance (in the 2000 election), the British National Party and Respect – The Unity Coalition (both in the 2004 election). Under the AMS used in Italy from 1993 to 2005, a threshold of 4% was needed to receive proportional seats.

Since smaller parties are likely, in compensatory systems, to win a larger number of proportional seats, such additional member systems could hand additional political power to the leaders of these parties at the expense of regional directly elected representatives, unless the additional members are elected on an open regional list or a closed regional list as in Scotland and Wales. With closed lists, party-list candidates may become puppets for the party leadership, or may add diversity to the party's elected members. The largest party in an election is likely to win a smaller number of proportional seats, so that governing parties may lose diversity, unless the members elected from the party list when it was in opposition then win local seats when the party gains enough support to form the government.

In the parallel systems, even the largest party will elect members from the party list, so the top list positions are guaranteed seats. This system is found in emerging democracies like post-communist Russia, where new national parties were evolving, and the voting system was intended to foster them, while allowing local independent members to win local seats, many of whom then joined the winning party. It retains the plurality principle but has another paper to allow voting for a party rather than a candidate.

Decoy lists

So-called "decoy lists" are a trick to unhinge the compensation mechanisms contained into the proportional part of the AMS, so to de facto establish a parallel voting.

For instance in the 2001 Italian general election, one of the two main coalitions (the House of Freedoms coalition, which opposed the MMP system), linked many of their constituency candidates to a decoy list (liste civetta) in the proportional parts, under the name Abolizione Scorporo. As a defensive move, the other coalition, Olive Tree, felt obliged to do the same, under the name Paese Nuovo. The constituency seats won by each coalition would not reduce the number of proportional seats they received. Between them, the two decoy lists won 360 of the 475 constituency seats, more than half of the total of 630 seats available, despite winning a combined total of less than 0.2% of the national proportional part of the vote. In the case of Forza Italia (part of the House of Freedoms), the tactic was so successful that it did not have enough candidates in the proportional part to receive as many seats as it in fact won, missing out on 12 seats.

Decoy lists are not used in Scotland, Wales, or most other places using AMS, where most voters vote for candidates from parties with long-standing names. In the run up to the 2007 Scottish election, the Labour party had considered not fielding list candidates in the Glasgow, West of Scotland, and Central Scotland regions, as their constituency strength in the previous two elections had resulted in no list MSPs; instead they proposed to support a list composed of Co-operative Party candidates; before this the Co-operative party had chosen not to field candidates of its own but merely to endorse particular Labour candidates. However the Electoral Commission ruled that as membership of the Co-Operative party is dependent on membership of the Labour party they could not be considered distinct legal entities.

In contrast, in the 2007 Welsh Assembly Election, Forward Wales had its candidates (including sitting leader John Marek) stand as independents, to attempt to gain list seats they would not be entitled to if Forward Wales candidates were elected to constituencies in the given region. However the ruse failed: Marek lost his seat in Wrexham and Forward Wales failed to qualify for any top-up seats.

Decoy lists would be useless in most mixed-member proportional voting models: there, because the proportional party vote is the sole to determine the final political result of the election, overhang seats would automatically compensate any effect of eventual decoy lists.

Use

AMS is used in:

• Unicameral nation/city elections in the United Kingdom:
  • Scotland: the Scottish Parliament
  • Wales: the National Assembly for Wales
  • London: the London Assembly
• Unicameral general elections in Hungary:
  • the National Assembly
• Bicameral general elections in Bolivia:
  • the Chamber of Deputies (Lower house).

It was used from 1993 to 2005 in Italy:

• the Chamber of Deputies, even if decoy lists changed de facto the electoral system into a pure parallel voting
• the Italian Senate, with a particular single-vote variant: proportional representation was automatically calculated upon all losers in the FPTP races, and candidates with best percentages were elected

In 1976, the Hansard Society recommended that a mixed electoral system in a form different from the German be used for UK parliamentary elections, but instead of using closed party lists, it proposed that seats be filled by the "best runner-up" basis used by the German state of Baden-Wurttemberg, where the compensatory seats are filled by the party's defeated candidates who were the 'best near-winner' in each of the state's four regions.^[2] It was the way that compensatory seats were allocated that made their report the origin of the additional member system, the term which the report also invented, which was then applied along with the much older "mixed system" by English-speaking writers on voting systems to West Germany's system and similar models until mixed member proportional (MMP) was invented for the adoption of the German system proposed for New Zealand in a royal commission report in 1986, which would explain why AMS and MMP have been used as synonyms. The system the Hansard Society proposed was eventually adopted but with closed lists instead of the "best runner-up" (popularly known in Britain as "best losers") provision for elections to the Scottish Parliament, Welsh Assembly and London Assembly, but not for that proposed for elections to the House of Commons.

This system was proposed by the Independent Commission in 1999, known as Alternative vote top-up (AV+). This would have involved the use of the Alternative Vote for electing members from single-member constituencies, and regional open party lists. However, contrary to the Labour Party's earlier manifesto promises, no referendum was held before the 2001 general election and the statement was not repeated.

The AMS system in use in the London Assembly would have been used for the other proposed regional assemblies of England, but this process has stalled since the No vote in the Northern England referendums in 2004.

Scotland

The system was implemented for the Scottish Parliament in order to make it difficult for one party to win an outright majority.^[4] However, in 2011, the Scottish National Party won 69 seats, a majority of four.

There is some evidence that many Scottish voters did not understand the implications of the system at first. In the first election for Scotland's new Parliament, the majority of voters surveyed misunderstood some key aspects of the difference there between the "first" (constituency) vote and the "second" (regional list) vote; indeed in some ways the understanding worsened in the second election.

The Arbuthnott Commission found references to first and second votes fuelled a misconception that the constituency vote should be a first preference and the regional vote a second one. That misconception was not helped by the Green Party's tactic of running only regional candidates and appealing for "second votes".

To deal with the misunderstanding between "first" and "second" votes, the ballot for the 2007 Scottish Parliament election was changed as recommended by the Arbuthnott Commission. The British government announced on 22 November 2006 that the two separate ballot papers used in the previous Scottish Parliament elections would be replaced for the elections in May 2007 by a single paper, with the left side listing the parties standing for election as regional MSPs and the right side the candidates standing as constituency MSPs.

However, the detailed results of the Scottish Social Attitudes Survey, 2003 showed confusion was about "first" and "second" votes, creating an average of 28% wrong answers.

See also

• List of democracy and election-related topics

References