Accuracy International Arctic Warfare

Accuracy International Arctic Warfare
Type Sniper rifle
Place of origin United Kingdom
Service history
In service 1982 (L96A1), 1988 (AW), 1990–present
Used by See Users
Wars Iraq War
Afghanistan War
Production history
Designed 1982 (PM), 1983 (AW)
Manufacturer Accuracy International
Produced 1982–present
Specifications
Weight 6.5 kg (14.3 lb)
Length 1,180 mm (46.5 in)
Barrel length 660 mm (26.0 in)

Cartridge 7.62×51mm NATO (.308 Winchester)
Action Bolt-action
Muzzle velocity 850 m/s (2,790 ft/s)
Effective firing range 800 m (870 yd)
Feed system 10-round detachable box magazine
Sights detachable aperture type iron sights
day or night optics

The Accuracy International Arctic Warfare rifle is a bolt-action sniper rifle designed and manufactured by the British company, Accuracy International. It has proved popular as a civilian, police, and military rifle since its introduction in the 1980s. The rifles have some features which improve performance in very cold conditions, without impairing operation in less extreme conditions.

Arctic Warfare rifles are generally fitted with a Schmidt & Bender PM II[1] telescopic sight with fixed or variable magnification. Variable telescopic sights can be used if the operator wants more flexibility to shoot at varying ranges, or when a wide field of view is required. Accuracy International actively promotes fitting the German-made Schmidt & Bender PM II/MILITARY MK II product line as sighting components on their rifles, which is rare for a rifle manufacturer. The German and Russian Armies preferred a telescopic sight made by Zeiss[2] over Accuracy International's preference.

History

Original design

The Accuracy International PM (Precision Marksman) rifle was entered into a British competition in the early 1980s as a replacement for the Lee–Enfield derived sniper rifles then in use by the British Army (e.g. L42A1). The Accuracy International rifle was selected over the Parker Hale M85. The British Army adopted the Accuracy International PM in 1982 into service as the L96A1 and outfitted the rifle with Schmidt & Bender 6×42 telescopic sights. In this configuration the rifle is capable of first shot hits with a cold, warm or fouled barrel. Tests with 10.89 g (168 gr) ammunition provided sub 0.5 MOA ten-shot groups at 91 m (100 yd) and the rifle was supplied with a telescopic sight, bipod, five magazines, sling, cleaning kit and tool roll, encased in a fitted transport case.[3]

Design evolution

Some years later, the Swedish military were also on the hunt for a new rifle, and in the early 1990s Accuracy International entered an upgraded version of the PM, now known as the AW or Arctic Warfare. This was the start of the Arctic Warfare name, which became the primary name of the rifle family despite its earlier names.

Special de-icing features allowing it to be used effectively at temperatures as low as −40 °C (−40 °F). For that the AW rifle featured a modified bolt with milled slots to prevent freezing and problems caused by penetrating water, dirt or similar disturbances. Further the stockhole, bolt handle, magazine release and trigger guard on the AW were enlarged to allow use with heavy Arctic mittens. This version was accepted into use by the Swedish Army in 1991 as the Prickskyttegevär 90 (Psg 90).

The modifications to the original PM or L96A1 made the British Army decide to adopt the "improved" AW version as well, designated L118A1. The rifles were fitted with Schmidt & Bender MILITARY MK II 3-12×50 telescopic sights offering the operator more flexibility to shoot at varying ranges, or in situations when a wide field of view is required. This rifle has seen service in recent conflicts such as Operation Granby and Operation Telic.

Rifle system family

The Accuracy International Arctic Warfare model has since spawned an entire family of sniper rifles using the Arctic Warfare name, and has been adopted by a number of other countries, including Australia, Belgium, Germany, Indonesia, Ireland, Latvia, Malaysia, Norway, the Netherlands, New Zealand, Russia, Singapore, Spain, Sweden and the United Kingdom. Other AI rifles descended from the L96A1 include the AI AE, and the AI AS50 (see variants below).

Most Arctic Warfare rifles are chambered for the 7.62×51mm NATO cartridge, but it can also be fitted for other cartridges. It is mounted with a muzzle brake to cut down on recoil, jump and flash.

Each country's rifles differ slightly. The Swedish Psg 90 for example, uses a Hensoldt (Zeiss) scope and can also use sabot rounds. In 1998 the German Bundeswehr adopted the first folding-stock Magnum version of the AW chambered in .300 Winchester Magnum (7.62×67mm) and with optics made by the German company Zeiss as the Scharfschützengewehr 22 (G22).

The AW's complete parts interchange ability and reliability in adverse weather conditions have made it a popular, if expensive, weapon. The rifle offers good accuracy (a capable marksman can expect ≤ 0.5 MOA consistent accuracy with appropriate ammunition), and its maximum effective range with a Schmidt & Bender 6×42 PM II scope is around 800 metres (870 yd).

The Arctic Warfare family's main competitor in production of high-end factory sniper rifles is the Sako TRG product line, with similar capability but lower price than the Arctic Warfare system.

Design details

G22 of the German Army with an AICS 2.0 stock.

The AW system is almost unique in being a purpose-designed sniper rifle, rather than an accurised version of an existing, general-purpose rifle.

The modular design of the AW system allows for flexibility, serviceability and repairability under field and combat conditions. Major components such as barrel and bolt can be switched between rifles, or replaced in the field by their operator with the help of some tools. The chambering can also be switched by the operator as long as the barrels, bolts and feeding mechanism can handle the shape and size of the cartridges.[4]

Features

Rather than a traditional wooden or polymer rifle stock, the AW is based on an aluminium chassis which extends the entire length of the stock. This chassis system is marketed as the Accuracy International Chassis System (AICS) and can be used for all Accuracy International rifles. All other components, including the receiver, are bolted directly to this chassis. Two hollow polymer "half thumb-hole stock panels", usually coloured green, dark earth or black, are in turn bolted to the chassis, creating a rugged, yet for its sturdiness comparatively light, weapon.

The Accuracy International receiver is bolted with 4 screws and permanently bonded with epoxy material to the aluminium chassis, and was designed for ruggedness, simplicity and ease of operation. To this end the heavy-walled, flat-bottomed, flat-sided receiver is a stressed part, machined in-house by AI from a solid piece of forged carbon steel. AW rifles are supplied in two action lengths—standard AW (short) and long SM (magnum). The six bolt lugs, arranged in two rows of three, engage a heat-treated steel locking ring insert pinned inside the front bridge of the action. The ring can be removed and replaced to refresh headspace control on older actions. The AW system cast steel bolt has a 0.75-inch (19.05 mm) diameter combined with gas relief holes in a 0.785 in (19.9 mm) diameter bolt body and front action bridge allowing high-pressure gases a channel of escape in the event of a cartridge-case head failure. Against penetrating water or dirt the bolt has milled slots, which also prevent freezing or similar disturbances. Unlike conventional bolt-action rifles, the bolt handle is bent to the rear, which eases the repeating procedure for the operator and reduces the contour of the weapon. The action cocks on opening with a short, 60 degree bolt throw and has a non-rotating (fixed) external extractor and an internal ejector. Firing pin travel is 0.26 in (6.6 mm) to keep lock times to a minimum. Finally, an 11 mm (0.43 in) integral dovetail rail located above the receiver is designed to accommodate different types of optical or electro-optical sights. As an option a MIL-STD-1913 rail (Picatinny rail) can be permanently pinned, bonded and bolted to the action, providing a standard interface for many optical systems.

Barrel

The free-floating, heavy, stainless steel barrels (stainless steel resists throat erosion better than normal barrels) for the available cartridge chamberings all have a different length, groove cutting and rifling twist rate optimized for their chambering and intended ammunition. For .243 Winchester the twist rate is 254 mm (1 in 10 in), and for .308 Winchester/7.62×51mm NATO variants it is 305 mm (1 in 12 in), except for the suppressed-barrel variant. If the consistent accuracy requirement of an operator is no longer met the barrel can fairly easily be renewed. This is normal practice for active high-performance precision rifle operators, who regard barrels as replaceable. The barrels are provided by the Australian Madco Arms (button rifled), and the Scottish company Border Barrels, who cut-rifles them on Pratt & Whitney rifling benches. Twists are one turn in 10,11,12,13 and 14 inches for 7.62 MM depending on RFP.

Safety

A three-position, firing pin blocking safety lever on the bolt shroud allows the bolt to be manipulated with the safety on. If the weapon is decocked, the firing pin can be felt at the end of the bolt action, making it possible in poor visibility to feel whether the weapon is ready to fire. The safety-catch of the weapon is also positioned at the rear, showing white if the safety is on, red if not.

Trigger

The two-stage trigger mechanism has an adjustable trigger pull weight of 10 to 20 N (2.2 to 4.4 lbf). The trigger assembly can be easily removed for cleaning by undoing two socket-head cap screws.

Ammunition feeding

Cartridges are fed through the bottom of the receiver using a detachable, double-column, steel box magazine. Rifles chambered for .300 Winchester Magnum or larger use a single row magazine.

AICS (Accuracy International Chassis System)

US Navy Mk 13 MOD 5 SWS using an AICS 2.0 stock and a Remington 700 based receiver.

The Accuracy International Chassis System (AICS) can be configured for various actions (all Accuracy International and some Remington 700 receivers), triggers, and other items. The AICS version for Remington 700 receivers was introduced in 1999. U.S. distributors started selling AICS chassis systems in late 2012 for Savage Arms' Model 10 series of precision long range rifles. These Savage Arms rifles are primarily for the law enforcement applications. There three are variants of AICS chassis system. The basic variant is the AICS 1.0 with a fixed cheek-piece. The AICS 1.5 variant has a fully adjustable cheek-piece. The AICS 2.0 is a folding stock that reduces the rifle's overall length by 210 mm (8.3 in) when folded and adds 0.2 kg (0.44 lb) to the rifle's total weight. The AICS 1.5 and 2.0 both have cheek-piece design that adjusts sideways and for height for optimal cheek position when using night vision equipment, or telescopic sights with large objective lenses. There is also a quick-adjust cheek-piece option that has a spring-loaded cheek-piece in conjunction with a quick-adjust butt plate.

The AICS side panels are made from a high-strength polymer and are available in the colours olive drab, dark earth or black.

Sling attachment points are mounted on each side of the rifle, so it can be carried flat against the back and used comfortably by left- and right-handed users. A front attachment point is situated below the fore end and can be used to anchor a target style sling or replaced by an adapter for a Harris bipod.

The United States Special Operations Command uses the AICS as the Mk 13 Mod 5 rifle chambered in .300 Winchester Magnum. The Mk 13 Mod 5 utilizes the "long-action" bolt of the Remington 700/M24 receiver and has a precision barrel that can be fitted with the suppressor of the Mk 11. It has a 3-sided Modular Accessory Rail System (MARS) for mounting optics on top and picatinny rail accessories on each side, and a folding bipod.[5] The Mk 13 is to be gradually replaced by the Modular Sniper Rifle.[6]

Accessories

G22 of the German Army with attached suppressor

The AW is usually equipped with an integrated bipod and it also has a monopod mounted on the buttstock.

Accuracy International accessories for the Arctic Warfare system[7] include a selection of PM II series telescopic sights made by Schmidt & Bender with laser filters for the military scopes, aluminium one-piece telescopic sight mounting sets, MIL-STD-1913 rails (Picatinny rails), lens hoods, various optical and kill flash filters and lens covers for telescopic sights, auxiliary iron sights for emergency use, cleaning kits, muzzle brakes/flash-hiders and suppressors, butt plates and spacers to regulate the length of pull and butt angle to the requirements of the individual shooter, buttspikes, bipod (adapters), handstops, mirage bands, soft and heavy-duty transit cases and various maintenance tools.[8]

Variants

Accuracy International rifles related

AI Arctic Warfare
AI AWP ('Police')
AI AWM ('Magnum')
AI AW50 ('.50 BMG')
AI AS50
Australian AW50F
Swedish Psg 90

There are two main types of AW series models. Models offered by AI, and type classified models in service with governments. AW models are related to, but not necessarily exactly synonymous with specific models adopted by countries.[9]

PM (Precision Marksman)

The rifle from which the Arctic Warfare family was developed. In this original form it entered service in the UK in the mid-1980s with the designation L96A1 (chambered for 7.62×51mm NATO).

AW (Arctic Warfare)

Australian SR-98

The basic 'improved' version of the L96A1 (still chambered for 7.62×51mm NATO). The name stems from special features designed to enable operation in extremely cold climates.

Adopted as the following:

According to the Accuracy International AW brochure the AW is available in 7.62×51mm NATO and .243 Winchester chamberings, though on special request other chamberings that will function in the AW bolt action can be fitted.

AWF (Arctic Warfare Folding)

AW model with side-folding polymer stock.

AWP (Arctic Warfare Police)

The AWP was a version intended for use by law enforcement as opposed to military, with AWP standing for Arctic Warfare Police. The most notable features were that the distinctive frame was black coloured, not a light green colour. It also has a shorter 24 in (610 mm) barrel than the AW model. The AWP is normally chambered for 7.62×51mm NATO/.308 Winchester or .243 Winchester ammunition, though it could be chambered for other cartridges. The AWP is distinct from the Accuracy International AW AE, which also has a black finish but is a cheaper non-military version of the AW series.[10][11]

AWS (Arctic Warfare Suppressed)

The AWS is specifically designed for use with subsonic ammunition which, depending on the target, gives an effective maximum range of around 300 metres (330 yd). Its noise levels are similar to those generated by .22 LR match ammunition. The weapon is fitted with a special .308 Winchester/7.62×51mm NATO 406 mm (16 in) long barrel which has a twist rate of 229 mm (1 in 9 in) and an integral suppressor. The AWS barrel/suppressor combination has a total length of 711 mm (28 in), which keeps the weapon's overall length within normal limits. The user can remove the barrel/suppressor combination and replace it with a standard AW or AWP barrel in about three minutes. As with all such systems, the sight will need re-zeroing after a barrel change.[12]

AWC (Arctic Warfare Covert)

The Covert system is essentially an AWS with a folding stock with a 305 mm (12 in) long barrel/suppressor combination with a 203 mm (1 in 8 in) twist rate. It is supplied in a small suitcase which houses the rifle with the stock folded and the barrel/suppressor combination detached. The polymer suitcase is lined with closed-cell foam featuring cut-outs for the stock/action/optics/bipod combination, the bolt, the suppressor, a magazine and a box of ammunition. While the Covert system's compacted size is considerably smaller than that of any conventional system, its special barrel and integral suppressor keep the weapon's overall length within normal limits when deployed.

It is notably used by the USSOCOM 1st SFOD-D (Delta Force), the British Special Air Service and the German KSK (designated G25)[13]

AWM (Arctic Warfare Magnum)

Royal Marines with L115A1 rifles.

The AWM is essentially an AW adapted for chambering dimensionally longer and fatter, more powerful magnum cartridges: specifically the .300 Winchester Magnum and the .338 Lapua Magnum.

The AWM chambered for the .338 Lapua Magnum cartridge has been adopted since its first introduction in the British and Dutch armed forces in 1996 by several armies:

The AWM-F was the first AW variant featuring a folding stock and has been adopted since its first introduction in the German Army in 1998 by several armies:

On 25 September 2012 Accuracy International announced on their company website that the AWM .338 Lapua Magnum rifle was being replaced by the more versatile and modular Accuracy International AX338 rifle, although still available to order.[14]

AW50 (Arctic Warfare .50 calibre)

The AW50 was introduced in 2000 by the British and Australian armed forces and is an AW rifle re-engineered and chambered for .50 BMG (12.7×99mm NATO).

AW50F (Arctic Warfare .50 calibre Folding Stock)

The AW50F is a variant of the AW50 adopted by the Australian military. It differs from the standard AW50 in that it is fitted with a folding stock (hence the F) and Madco barrel.

AE/AE MkIII (Accuracy Enforcement)

The Accuracy International AE was introduced in 2001 as a cheaper, somewhat simplified, less robust version of the L96/AW series intended for law enforcement, in place of the more expensive AWP or AW models intended for military use. The AE bolt-action differs from the larger, more angular AW design. The round AE receiver is lighter than in the AW models. The action of the AE is not permanently bonded with epoxy material to the aluminium chassis and can be removed. Unlike the AW models, the AE can not be ordered in a left-handed configuration. The AE is fitted in 7.62×51mm NATO calibre and its barrel is 610 mm (24 in) long. In 2009 the AE was updated to the AE MkIII.[15] The AE MkIII rifle system uses AICS 5- and 10-round magazines, has a removable trigger group, and a screw-adjustable cheekpiece. An optional 508 mm (20.0 in) barrel with muzzle brake or tactical suppressor mounting facilities and a folding chassis are available.

AX series

The Accuracy International AX338/AXMC long range rifle series was designed for long, high-powered super magnum cartridges and was unveiled in January 2010 at the SHOT Show tradeshow. It is a major design evolution based on the AWM variant of the AW series and its development was according to Accuracy International partly driven by a Precision Sniper Rifle (PSR) U.S. Special Operations Command solicitation.[16] The PSR contract was awarded in 2013 to Remington Arms for their Modular Sniper Rifle.[17]

The AX 338/AXMC rifle is chambered for the .338 Lapua Magnum round and features parts that dimensionally or otherwise are not interchangeable with the AW rifle series.[18] The AX338 was designed as a modular multi-calibre rifle, meaning it can be user changed from .338 Lapua Magnum to .300 Winchester Magnum and 7.62×51mm NATO by exchanging bolts, magazines and barrels. For 7.62×51mm NATO, an additional magazine converter must also be fitted within the magazine port to allow the use of an Accuracy International AX308 magazine. A single shroud/firing pin assembly is provided for each multi-calibre weapon system and must therefore be installed into the required bolt assembly as part of the conversion procedure.

Compared to the AWM, the bolt action of the AX338/AXMC is longer and wider and the internal magazine is lengthened, allowing the unimpaired use of .338 Lapua Magnum cartridges loaded to the C.I.P. (Permanent International Commission for the Proof of Firearms Portable) maximum allowed overall length of 93.50 mm (3.681 in).

The AX338/AXMC bolt is 22 mm (0.87 in) in diameter and the bolt, bolt head, locking ring and barrel tenon construction were designed to be significantly stronger and more capable of handling higher chamber pressures and temperatures and thus higher bolt thrust safely compared to the AWM variant. The bolt construction is significantly revised, allowing removal of the bolt head from the bolt body with simple hand tools. Cartridge/calibre changes can be accomplished by the change of a bolt head or complete bolt assembly. The interior of the bolt has a new safety feature added that will prevent the rifle from firing on a partially closed bolt. An improved leaf-spring AW 7.62 style extractor should enhance the cycling reliability of the bolt action. This extractor can be removed and reinstalled with the help of a bullet tip. The top of the receiver features a MIL-STD 1913 Picatinny rail for mounting aiming optics. As an option this rail can be provided with a forward canted angle optimized for extreme long range shooting. The diameter of the barrel threading was enlarged and is unique to the AX 338. The rifle is fitted with a 27 in (686 mm) long .338 in (8.6 mm) calibre free floating fluted barrel as standard. The AX338 has a non conventional 238 mm (1:9.375 in) twist rate to adequately stabilize longer, heavier .338 calibre very-low-drag projectile designs that became more common in the 21st century. Other barrel lengths, calibres and twist rates are available as options. The two-stage trigger has a new trigger shoe that can be moved for and rearwards by 0.5 in (13 mm) and has a 15 to 20 N (3.4 to 4.5 lbf) adjustable trigger pull. The AX338/AXMC uses new 10-round double stacked .338 Lapua Magnum steel magazines that are inserted into a revised magazine well.[19][20]

Further the AX33/AXMC8 features a revised external chassis stock system with an octagonal shaped fore end which envelops the free floating barrel offering modular attachment points for user (re)movable MIL-STD 1913 Picatinny accessory rails on four sides. Several lengths of octagonal shaped fore end and Picatinny accessory rails are available as options. The rear of the stock can be either a thumbhole or a pistol grip configuration and has a butt spike as standard. The minimal possible length of pull was reduced compared to the AICS stocks to facilitate usage when wearing thick clothing or body armor. The stock has a left-right and height adjustable cheekpiece as standard or can be fitted with an optional quick adjustable cheekpiece. The pistol grip can be fitted with backstraps of differing sizes that combined with the movable trigger shoe enables the trigger to be tailored to the individual shooter.[21]

The AX series rifle is also available in a smaller 7.62×51mm NATO dedicated AX308 version with a smaller short action with a bolt diameter of 20 mm (0.79 in) and in a larger AX50 .50 BMG version with a bigger extra long action with a bolt diameter of 30 mm (1.2 in).[22][23]

AICS AX stock

An AX series Accuracy International Chassis System (AICS) stock is also available for Remington 700 short and long bolt action based rifles.[24][25]

AT rifle (Accuracy Tactical)

The Accuracy International AT model was introduced in 2014 as a cheaper, somewhat simplified version of the AX series intended for law enforcement and civilian users, in place of the more expensive AX models intended for military use. The AT is fitted in .308 Winchester calibre only.

AICS AT stock

An AT series Accuracy International Chassis System (AICS stock) is also available for Remington 700 short and long bolt action based rifles, Savage M10 short action and Tikka T3 short action rifles.

Users (7.62×51mm NATO or smaller chamberings)

References

Notes

  1. Schmidt & Bender PM II
  2. "Zeiss: Telescopic sights for hand-held weapons". Retrieved 26 October 2014.
  3. Pegler, Martin. Out of Nowhere: A History of the military sniper. Oxford, UK: Osprey Publishing. pp. 314–316. ISBN 978-1-84176-854-0.
  4. "Accuracy International AW Youtube presentation". Retrieved 26 October 2014.
  5. Mk 13 Mod 5 - Americanspecialops.com
  6. SOCOM Sticks With Remington - Strategypage.com, March 18, 2013
  7. Accuracy International accessories list
  8. Accuracy International rifle accessories brochure
  9. Accuracy International Precision Rifles for the 21st Century
  10. "The AWP at Modern Firearms". Retrieved 26 October 2014.
  11. The AWP at Sporting Services
  12. Sound Tech’s AI AWS
  13. Kommando International Special Operations Magazine, K-ISOM, Ausgabe 5, Mai/Juni 2009
  14. Accuracy International website news section: AW338 rifles fazed out and replaced by AX338 rifles
  15. An AE for Accuracy by Steve Adelmann
  16. "Precision Sniper Rifle (PSR) U.S. Special Operations Command Solicitation". Retrieved 26 October 2014.
  17. Curtis, Rob (7 March 2013). "SOCOM PSR contract awarded to Remington Defense MSR". Gearscout blog. Military Times. Retrieved 9 March 2013.
  18. The New AX rifle shown at the Shot Show 2010, Las Vegas
  19. AX338 .338 long range rifle
  20. How it works magazine article AX338 PSR sniper rifle
  21. AX338 long range rifle brochure
  22. AX308 sniper rifle brochure
  23. AX50 anti matériel rifle brochure
  24. Accuracy International AX
  25. Accuracy International AICS AX
  26. Australian Defence Force's standard issue sniper rifle
  27. Army Internet SR98 7.62 Sniper Rifle
  28. "Police sniper watches from roof, Sydney". ABC News. Retrieved 26 October 2014.
  29. "Bangladesh's standard issue sniper rifle". Bangladesh Military Forces - BDMilitary.com. Retrieved 26 October 2014.
  30. "Youtube". YouTube. Retrieved 26 October 2014.
  31. "RUČNÍ ZBRANĚ AČR (hand weapons)" (PDF) (in Czech). Ministry of Defence & Armed Forces of the Czech Republic. 2007-04-18. p. 58. Retrieved 2010-06-29.
  32. "Greece Ministry of Public Order Press Office: Special Anti-Terrorist Unit" (PDF). http://astynomia.gr – Official Website of the Hellenic Police. July 2004. Retrieved 2009-10-13. External link in |publisher= (help)
  33. "Army Weapons – AI96 Sniper Rifle". Retrieved 26 October 2014.
  34. 1 2 3 4 Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). ISBN 978-0-7106-2869-5.
  35. Accuracy International AWS – colmoschin.it
  36. "Arma dei Carabinieri". Retrieved 26 October 2014.
  37. Thompson, Leroy (December 2008). "Malaysian Special Forces". Special Weapons. Retrieved 2010-02-10.
  38. "Accuracy – Special Forces – Wapens" (in Dutch). Netherlands Legermuseum: Collectie Informatie Centrum. Retrieved 2009-12-02.
  39. "Accuracy, antipersoneel snipergeweer 7.62 mm" (in Dutch). Netherlands Ministry of Defence. Retrieved 2010-02-24.
  40. http://defence.pk/threads/pakistani-sniper-team-kills-a-taliban-insurgent-at-2000-mt.346641/#post-6497148
  41. "DOTACIONES DE ARMAMENTO Y SISTEMAS PARA EL COMBATIENTE DE LAS FFAA PERUANAS BATALLON DE COMANDOS MGP". YouTube. Retrieved 26 October 2014.
  42. http://www.exercito.pt/meios/Documents/media_MeiosOp/Armamento/CARABINA%207,62MM%20SNIPER.pdf
  43. "Календарь ФСБ". Retrieved 26 October 2014.
  44. "Taakmag". Retrieved 26 October 2014.
  45. "Modern Firearms". Retrieved 26 October 2014.
  46. "Psg 90 Prickskyttegevär 90 - AI L96a1 - SoldF.com". Retrieved 26 October 2014.
  47. "Accuracy International L96A1". www.MilitaryFactory.com. January 16, 2009. Retrieved 2009-01-20.
  48. Miller, David (2001). The Illustrated Directory of 20th Century Guns. Salamander Books Ltd. ISBN 1-84065-245-4.

General references

External links

This article is issued from Wikipedia - version of the Wednesday, February 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.