AAC Wamira

Wamira
Role Trainer aircraft
Manufacturer Australian Aircraft Consortium
First flight -
Status Cancelled 1986
Primary user Royal Australian Air Force
Number built 0
Program cost $65M before project was cancelled[1]


The AAC Wamira was a turboprop military trainer aircraft, designed for the Royal Australian Air Force (RAAF) by the Australian Aircraft Consortium (AAC). The project was cancelled shortly after the first prototype was completed.

Design and development

The story of the aircraft and its creators are interwoven, as AAC was set up expressly to design and build the aircraft. The consortium came into being in 1981, with its members being the three main aircraft manufacturers in Australia at that time—the Commonwealth Aircraft Corporation (CAC), the Government Aircraft Factories (GAF), and Hawker de Havilland (HdH). The RAAF, which expressed an intention to buy 69 aircraft, specified a turboprop trainer of broadly conventional tricycle undercarriage low-wing layout, to be powered by a Pratt & Whitney Canada PT6A-25C engine.[2] Unusually however, its two seats were to be in a side-by-side configuration. The RAAF also specified that the type be fully aerobatic, be capable of cross-country navigation and weapons training, have a 200 kt cruising speed at sea level, and a minimum service life of 20 years and 8,000 flying hours.[2] AAC signed a design and development contract in June 1982 and began work to produce an aircraft to meet the design criteria under the designation A10.

When it became clear that the aircraft as specified by the RAAF had limited appeal to other potential users, a version with the more usual tandem seating was designed, this being designated the A20; both models were named Wamira. A Memorandum of Understanding was signed with Westland Aircraft to establish a joint venture to market (and hopefully sell) the A20 in Europe.[3] The A20 was subsequently entered in the competition to replace the Royal Air Force (RAF) fleet of BAC Jet Provosts,[4] a competition eventually won by the Short Tucano. An engineering mockup (EMU) was produced in Australia consisting of a fuselage from the fin fillet forward with stub wings. Made from wood & alloy it utilised real aircraft components such as ejection seats, control columns, rudder pedals etc. and was shipped to the UK appearing on the Westland stand at Farnborough '84. However the Wamira was never a serious contender due to it being at the design stage whilst the other three contenders were flying aircraft.

By the time the RAF competition was lost, the whole Wamira project was in doubt. This was partly due to delays in completing the prototype, but mainly due to huge cost overruns. At the time the RAAF was replacing its front line fighter fleet and wanted an Airborne Early Warning platform and inflight refuelling aircraft to enhance the new type's capabilities,[2] and an Auditor-General report found that the Wamira project cost was likely to be more than double that originally estimated.[2] In July 1985 it was announced that the RAAF trainer requirement was now a competition, and that the Short Tucano and Pilatus PC-7 and PC-9 (all of which had tandem seating) would be considered as well as the Wamira. The same month CAC was absorbed by HdH, meaning that HdH now had a two-thirds share in AAC, and quickly became sole owner of the Wamira project when it bought GAF's share.[5] On 16 December 1985 the Pilatus PC-9 was announced as the winner of the competition and the Wamira project was cancelled.[6] Ironically the consortium partners were later jointly responsible for licence-production of the PC-9.

Endeavour Aerospace acquired the Wamira design and associated rights from the Australian government in 2000. The aircraft design was subsequently renamed Phoenix. Endeavour Aerospace believes that the design has potential in the General Aviation market as a pilot trainer and recreation/sports/utility aircraft. The original drawings and design records have been kept in safe storage since being acquired.

As for the A-20 EMU it resided at the Westland Helicopters Weston factory until 'Heseltine-gate' in 1986 closed the site. The mock-up returned to Australia in 2012 via a group of enthusiasts who raised the funds for transport and fumigation. The A-20 EMU is now in storage at an aircraft restoration facility in the western suburbs of Melbourne awaiting a full overhaul.

Specifications (A.10 Wamira)

Data from World Trainer Directory[7]

General characteristics

Performance

See also

Aircraft of comparable role, configuration and era

References

Wikimedia Commons has media related to CAC aircraft.
  1. ↑ "Aircraft" magazine, p22, Vol.66, January 1986
  2. 1 2 3 4 Hawkins, Max. "Wamira Project Flies into Turbulence", "Defence Update", Australian Aviation magazine, No. 27, June 1985, p58-59. Aerospace Publications Pty. Ltd., Weston Creek, ACT. ISSN 0813-0876
  3. ↑ "Anglo-Australian Aircraft Company to be Established by Westland and the Australian Aircraft Consortium", "Newsdesk - Military", Australian Aviation magazine, No. 24, September 1984. Aerospace Publications Pty. Ltd., Manly, NSW. ISSN 0813-0876
  4. ↑ "A20 Back in the Trainer Race", "Newsdesk - Military", Australian Aviation magazine, No. 26, March 1985. Aerospace Publications Pty. Ltd., Weston Creek, ACT. ISSN 0813-0876
  5. ↑ Hawkins, Max. "Introducing - Son of Wamira!", "Defence Update", Australian Aviation magazine, No. 28, September 1985, p65-66. Aerospace Publications Pty. Ltd., Weston Creek, ACT. ISSN 0813-0876
  6. ↑ RAAF Museum PC-9 page retrieved 2008-01-22.
  7. ↑ "World Trainer Directory: AAC A.10 Wamira". Air International. Vol. 28 no. 6. June 1985. p. 297. ISSN 0306-5634.
  8. ↑ Taylor, John W. R. (1982). Jane's All The World's Aircraft 1982–83. London: Jane's Publishing Company. p. 6. ISBN 0-7106-0748-2.
This article is issued from Wikipedia - version of the Friday, January 01, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.