ALFA 15/20 HP

A.L.F.A. 15-20 HP
Overview
Manufacturer A.L.F.A.
Production 1914–1920
Assembly Portello, Milan, Italy
Layout Front-engine, rear-wheel drive
Powertrain
Engine 2,4 L I4
Transmission 3-speed manual
Dimensions
Wheelbase 2,920 mm (115.0 in)
Length 3,780 mm (148.8 in)
Width 1,400 mm (55.1 in)
Curb weight 920 kg (2,028 lb)
Chronology
Predecessor A.L.F.A 15 HP
Successor Alfa Romeo 20/30 HP

The A.L.F.A 15 -20 HP is a car produced by A.L.F.A, manufacturer that later became Alfa Romeo.

History

The model was derived from 15 HP and was fitted with a four-cylinder engine and 2,413 cc of displacement.[1] Compared to its ancestor, the engine capacity was unchanged compared with a rise of power delivered.[1] In fact the engine of 15-20 HP had a compression ratio of 4.3: 1 and developed a maximum power of 28 CV at 2,400 rpm.[1] Bore and stroke were, respectively, 80 mm (3.1 in) and 120 mm (4.7 in). It was front engined rear wheel drive car. It had gearbox with three gears.

The 15-20 HP was available in two types of body, torpedo and sedan. Compared to that of the ancestor model, the track increased by 50 mm (2.0 in) and reached the 1,350 mm (53.1 in). The model could reach a speed up to 100 km/h (62 mph) and could accelerate from 0 to 100 km/h (62 mph) at 100 seconds.

It was designed by Giuseppe Merosi and it was on sale, at launch, to 9,500 lire. In 1920, after the end of World War I, the price was whipped up to 24,000 liras. The production was in fact interrupted 1915-1919 for war.[2][3] It went out of production in 1920. It was not until 1923, when the Alfa launched similar car, the RM.

Notes

  1. 1 2 3 Owen (1985), p. 10.
  2. Owen (1985), p. 13.
  3. Sannia (2010), p. 26.

Bibliografia


This article is issued from Wikipedia - version of the Sunday, January 03, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.