7.92×33mm Kurz
7.92×33mm Kurz | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
German 7.92×33mm Kurz cartridge | ||||||||||||
Type | Rifle | |||||||||||
Place of origin | Germany | |||||||||||
Service history | ||||||||||||
Used by | Nazi Germany | |||||||||||
Wars | World War II - present day | |||||||||||
Production history | ||||||||||||
Designer | Polte ammunition works, Magdeburg[1] | |||||||||||
Designed | 1938[1] | |||||||||||
Specifications | ||||||||||||
Parent case | 7.92×57mm[2] | |||||||||||
Case type | Rimless, bottleneck | |||||||||||
Bullet diameter | 8.22 mm (0.324 in) | |||||||||||
Neck diameter | 9.10 mm (0.358 in) | |||||||||||
Shoulder diameter | 11.40 mm (0.449 in) | |||||||||||
Base diameter | 11.94 mm (0.470 in) | |||||||||||
Rim diameter | 11.95 mm (0.470 in) | |||||||||||
Rim thickness | 1.30 mm (0.051 in) | |||||||||||
Case length | 33.00 mm (1.299 in) | |||||||||||
Overall length | 48.00 mm (1.890 in) | |||||||||||
Case capacity | 2.22 cm3 (34.3 gr H2O) | |||||||||||
Rifling twist | 240 mm (1 in 9.45 inch) | |||||||||||
Primer type | Berdan | |||||||||||
Maximum pressure (C.I.P.) | 340.00 MPa (49,313 psi) | |||||||||||
Ballistic performance | ||||||||||||
| ||||||||||||
Test barrel length: 419 mm Source(s): "Cartridges of the World" [3] |
The 7.92×33mm Kurz (designated as the 7.92 x 33 kurz by the C.I.P.)[4][5][6][7][8] is a rimless bottlenecked rifle cartridge developed in Nazi Germany prior to and during World War II. The ammunition is also referred to as 7.9mm Kurz (German: Kurz meaning short), 7.9 Kurz, or 7.9mmK, or 8×33 Polte. It was specifically intended for development of an automatic carbine (assault rifle). The round was developed as a compromise between the longer 7.92×57mm rifle and the 9×19mm Parabellum pistol rounds, and is known as an intermediate cartridge (German: Mittelpatrone).
Cartridge dimensions
The 7.92×33mm Kurz has 2.22 ml (34.3 grains H2O) cartridge case capacity. The exterior shape of the case was designed to promote reliable case feeding and extraction in assault rifles under extreme conditions.
7.92×33mm Kurz maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).
Americans would define the shoulder angle at alpha/2 ≈ 17.5 degrees. The common rifling twist rate for this cartridge is 240 mm (1 in 9.45 in), 4 grooves, Ø lands = 7.89 millimetres (0.311 in), Ø grooves = 8.20 millimetres (0.323 in), land width = 4.40 millimetres (0.173 in) and the primer type is Berdan or Boxer (in large rifle size).
According to the official C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) rulings the 7.92×33mm Kurz can handle up to 340.00 MPa (49,313 psi) Pmax piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.[4] This means that 7.92×33mm Kurz chambered arms in C.I.P. regulated countries are currently (2014) proof tested at 425.00 MPa (61,641 psi) PE piezo pressure.
Military designation
In German military instructions, the caliber was often deemed unimportant; the name was emphasized. The 7.92×33mm "Kurz"[5][6][7][8] was referred to as the Pistolenpatrone M43 (pistol cartridge model 1943), Pistolen-Munition M43 (pistol ammunition model 1943); after the inception of the Sturmgewehr 44, it was called the "short cartridge model 1943" (German: Kurzpatrone 43).
Background
The cartridge was the same caliber as the 7.92×57mm,[2] which was employed by the standard German Army infantry rifle, the Karabiner 98k, as well as its machine guns. The German armed forces had issued a 7.92×57mm automatic rifle, the FG 42, in limited numbers, but the heavy recoil of the round made it difficult to use efficiently in this role.
What was needed was a cartridge that could be used in a lighter, more maneuverable rifle to bridge the gap between submachine guns and rifles. The standard issue 7.92×57mm cartridge case was shortened by 24mm. With a case length of only 33 mm, the Kurz round was substantially shorter and delivered less recoil than full-length 7.92×57mm, but was still as effective when engaging targets at typical combat ranges of 300 m (328 yd). This meant it could be fired effectively from a weapon that weighed less than a machine gun, yet still had much greater range, velocity, and stopping power than the 9mm Parabellum which was standard in German submachine guns.
The shortage of brass in the later stages of World War II led to the use of steel cases for this new cartridge. The Kurz cartridge incorporated more taper than the parent case because steel is less elastic than brass and more difficult to extract. This led to the distinctive curved magazine for weapons that used this cartridge. The steel cases were typically lacquer-coated to prevent corrosion. The weight of the 7.92mm Kurz S.m.E. round was 17.05 grams, the bullet taking up 8.1 grams and the cartridge and powder the remaining 8.95 grams.[9]
Firearms
Prior to the development of the Kurz round and its associated weapons, two basic small arms existed to equip the regular infantryman, the bolt-action rifle and the submachine gun. The bolt-action rifle was the standard small arm for most of the worlds armies, usually incorporating good accuracy and stopping power, but with a very limited rate of fire. The submachine gun was a newer piece of equipment, which offered a very high rate of fire, and a compact size, but was of very limited range and stopping power due to the pistol round (usually 9mm) it fired. While the Kurz round did not match the range and accuracy of a full power round fired by a traditional bolt-action rifle, it could still engage individual targets out to 300 m (328 yd). As an effective, intermediate-sized cartridge, the Kurz round was a key evolution in the development of the assault rifle by providing a combination of controllable automatic fire and acceptable accuracy at ranges most likely to see infantry combat.[10][11][12][13]
Only a few weapons used this round, most notably the Sturmgewehr 44 and the Volkssturmgewehr 1-5. A number of weapons in development at the time also used the cartridge, including the Sturmgewehr 45, HIW VSK, Wimmersperg Spz-kr; and a number of German and Czech [14] prototype weapons made during World War II and a small number of prototype weapons made in other countries after the war. An unknown number of late-war K43 rifles were chambered for this cartridge and modified to accept MP 44 magazines.[15] Variants of the VK 98 (Volks-Karabiner), a so-called last-ditch bolt-action rifle intended for the Volkssturm Home Guard, were also chambered this cartridge with unknown quantities produced by Mauser[16] and Steyr.[17]
Post-World War II
After World War II, the cartridge was tested and used in prototype rifles in Argentina and Belgium, amongst other nations, during the late 1940s and early 1950s. The first FN FAL prototype was designed to fire the cartridge when NATO was organized. After the war it was manufactured by East Germany (the GDR), Czechoslovakia (ČSSR), and Egypt.
Spain continued development after the war, creating a few variants of the cartridge, such as tracer rounds, boat-tailed rounds and slightly shorter bullets that have a lead core. These developments were encouraged by Calzada Bayo, a Spanish lieutenant colonel.[18] However, they were canceled and Spanish CETME rifles were chambered for a variant of the 7.62×51mm NATO round.
Demand for the ammunition still exists, as the StG 44 is still in use by some within the Lebanese Forces militia,[19] as well as irregular forces in some countries in the Horn of Africa and the Middle East, where captured German arms were distributed as military aid by Eastern Bloc countries as well as Yugoslavia. It is currently manufactured by the Prvi Partizan factory in Užice, Serbia.[20] There is also some demand on the private collectors' market; reloadable cartridge cases can be produced by resizing and trimming 7.62×51mm NATO cases, and Hornady makes a 125-grain .323-inch (8.2 mm) bullet for this caliber suitable for handloads.
In Pakistan, the same cartridge is also reported to be in use by the local name of "44 Bore." This either refers to the "44" of the MP44/StG44 series or the "L44A1" inscription found on the headstamps on necked-down 7.62×51mm cartridge cases. It is used in locally made AK-pattern weapons in semi-automatic only (produced or converted in Peshawer, Kohat and Derra Adam Khel, etc.) that chamber this cartridge, since 7.62×39mm is a restricted caliber (known as Prohibited Bore or "PB" in Pakistan). These AK-pattern weapons are usually considered inferior due to inconsistent gunsmithing of weapons chambered or converted for this cartridge and lack of quality control of the ammunition.[21] It is sometimes used by private security companies. The usage of 7.92 mm bullets in 7.62 mm barrels without reboring is not considered to be a safe practice.[22]
See also
References
- 1 2 Götz, Hans-Dieter (1974). Die deutschen Militärgewehre und Maschinenpistolen: 1871-1945. Motorbuch-Verlag. ISBN 978-3-87943-350-6.
- 1 2 Military Small Arms Of The 20th Century, 2000 by Ian V. Hogg & John S. Weeks, Page 221,243-245, 407
- ↑ Barnes, Frank C. (1997) [1965]. McPherson, M.L., ed. Cartridges of the World (8th ed.). DBI Books. pp. 294, 311. ISBN 0-87349-178-5.
- 1 2 C.I.P. TDCC datasheet 7,92 x 33 kurz
- 1 2 Small Arms Review, Vol. 7 No. 4, January, 2004 | Small arms Review refers to this cartridge only as 7.92×33mm Kurz
- 1 2 Jane's Guns Recognition Guide, Ian Hogg & Terry Gander, Harper & Collins Publishers, 2005, Page 287 refers to this cartridge only as 7.92×33mm Kurz
- 1 2 Barnes, Frank C. (1997) [1965]. McPherson, M.L.. ed. Cartridges of the World (8th Edition ed.). DBI Books. pp. 294, 311. ISBN 0-87349-178-5. | Cartridges of the World refers to this cartridge only as 7.92×33mm Kurz
- 1 2 Kopp, Dr. Carlo, "Origins of the assault rifle" (PDF), Defence Today, pp. 74–75
- ↑ http://home.scarlet.be/p.colmant/polte-k.htg/draw02.jpg
- ↑ Jane's Guns Recognition Guide, Ian Hogg & Terry Gander, HarperCollins Publisher, 2005, p.287
- ↑ "Machine Carbine Promoted: MP43 Is Now Assault Rifle StG44, WWII Tactical and Technical Trends, No. 57, April 1945". Lone Sentry. 2007-05-10. Retrieved 2012-08-23.
- ↑ Military Small Arms Of The 20th Century, 7th Edition, 2000 by Ian V. Hogg & John S. Weeks, p.243
- ↑ Major Thomas P. Ehrhart Increasing Small Arms Lethality in Afghanistan: Taking Back the Infantry Half-Kilometer. US Army. 2009
- ↑ "Malý kulomet ZK 423". VHU (Military History Institute in Prague). 2012. Retrieved 2015-01-13.
- ↑ Senich, Peter R. The German Assault Rifle, 1935–1945, Paladin Press, Boulder, Colo., 1987, P. 147
- ↑ Walter, John, Guns of the Third Reich, Greenhill Books, London and Stackpole Books, Pennsylvania, 2003
- ↑ Senich, Peter R. The German Assault Rifle, 1935–1945, Paladin Press, Boulder, Colo., 1987, PP. 168-170
- ↑ "The Spanish kurz". Claus.espeholt.dk. 1952-12-18. Retrieved 2011-12-05.
- ↑ "Lebanese Forces web site". Lebaneseforces.com. Retrieved 2011-12-05.
- ↑ "7.92 x 33 Kurz". Retrieved December 11, 2014.
- ↑ "The Firearms Blog". thefirearmblog.com. Retrieved 2013-08-22.
- ↑ "44 Bore – 7.62 x 39 mm AK rifles modified to fire 7.92 x 33 Kurz ammunition".
Further reading
- Kapell, Dr. Dieter, Die deutsche Kurzpatrone 7,92×33, Books on Demand GmbH, Norderstedt Germany, 2007
- Handrich, Hans-Dieter, Sturmgewehr! From Firepower to Striking Power, Collector Grade Publications Inc., Cobourg, Canada, 2004