List of musical symbols

Musical symbols are the marks and symbols, used since about the 13th century in the musical notation of musical scores, styles, and instruments to describe pitch, rhythm, tempo – and, to some degree, its articulation (e.g., a composition in its fundamentals).

Lines

	Staff The staff is the fundamental latticework of music notation, on which symbols are placed. The five staff lines and four intervening spaces correspond to pitches of the diatonic scale – which pitch is meant by a given line or space is defined by the clef. In British usage, the word "stave" is often used.
	Ledger or leger lines These extend the staff to pitches that fall above or below it. Such ledger lines are placed behind the note heads, and extend a small distance to each side. Multiple ledger lines can be used when necessary to notate pitches even farther above or below the staff.
	Bar line These separate measures (see time signatures below for an explanation of measures). Also used for changes in time signature. Bar lines are extended to connect multiple staves in certain types of music, such as keyboard, harp, and conductor scores, but are omitted for other types of music, such as vocal scores.
	Double bar line, Double barline These separate two sections of music or are placed before a change in key signature.
	Bold double bar line, Bold double barline These indicate the conclusion of a movement or an entire composition.
	Dotted bar line, Dotted barline Subdivides long measures of complex meter into shorter segments for ease of reading, usually according to natural rhythmic subdivisions.
	Bracket Connects two or more lines of music that sound simultaneously. In general contemporary usage the bracket usually connects the staves of separate instruments (e.g., flute and clarinet; 2 trumpets; etc.) or multiple vocal parts in a choir or ensemble, whereas the brace connects multiple parts for a single instrument (e.g., the right-hand and left-hand staves of a piano or harp part).
	Brace Connects two or more lines of music that are played simultaneously in keyboard, harp, or some pitched percussion music.[1] Depending on the instruments playing, the brace, (occasionally called an "accolade" in some old texts), varies in design and style.

Clefs

Clefs define the pitch range, or tessitura, of the staff on which it is placed. A clef is usually the leftmost symbol on a staff. Additional clefs may appear in the middle of a staff to indicate a change in register for instruments with a wide range. In early music, clefs could be placed on any of several lines on a staff.

	G clef (Treble clef) The centre of the spiral defines the line or space on which it rests as the pitch G above middle C, or approximately 392 Hz. Positioned here, it assigns G above middle C to the second line from the bottom of the staff, and is referred to as the "treble clef." This is the most commonly encountered clef in modern notation, and is used for most modern vocal music. Middle C is the first ledger line below the staff here. The shape of the clef comes from a stylised upper-case-G.
	C clef (Soprano, Alto, Tenor, and Bass clefs) These clefs point to the line (or space, rarely) representing middle C, or approximately 262 Hz. As illustrated here, it makes the center line on the staff middle C, and is referred to as the "alto clef." This clef is used in modern notation for the viola. While all clefs can be placed anywhere on the staff to indicate various tessitura, the C clef is most often considered a "movable" clef: it is frequently seen pointing instead to the fourth line and called a "tenor clef". This clef is used very often in music written for bassoon, cello, trombone, and double bass; it replaces the bass clef when the number of ledger lines above the bass staff hinders easy reading. C clefs were used in vocal music of the classical era and earlier; however, their usage in vocal music has been supplanted by the universal use of the treble and bass clefs. Modern editions of music from such periods generally transpose the original C clef parts to either treble (female voices), octave treble (tenors), or bass clef (tenors and basses). It can be occasionally seen in modern music on the third space (between the third and fourth lines), in which case it has the same function as an octave treble clef. This unusual practice runs the risk of misreading, however, because the traditional function of all clefs to identify staff lines, not spaces.
	F clef (Bass clef) The line or space between the dots in this clef denotes F below middle C, or approximately 175 Hz. Positioned here, it makes the second line from the top of the staff F below middle C, and is called a "bass clef." This clef appears nearly as often as the treble clef, especially in choral music, where it represents the bass and baritone voices. Middle C is the first ledger line above the staff here. In old music, particularly vocal scores, this clef is sometimes encountered centered on the third staff line, in which position it is referred to as a baritone clef; this usage has essentially become obsolete. The shape of the clef comes from a stylised upper-case-F (which used to be written the reverse of the modern F)
	Neutral clef Used for pitchless instruments, such as some of those used for percussion. Each line can represent a specific percussion instrument within a set, such as in a drum set. Two different styles of neutral clefs are pictured here. It may also be drawn with a separate single-line staff for each untuned percussion instrument.
	Octave clef Treble and bass clefs can also be modified by octave numbers. An eight or fifteen above a clef raises the intended pitch range by one or two octaves respectively. Similarly, an eight or fifteen below a clef lowers the pitch range by one or two octaves respectively. A treble clef with an eight below is the most commonly used, typically used for guitar and similar instruments.
	Tablature For stringed instruments it is possible to notate tablature in place of ordinary notes. In this case, a TAB sign is often written instead of a clef. The number of lines of the staff is not necessarily five: one line is used for each string of the instrument (so, for standard 6-stringed guitars, six lines would be used). Numbers on the lines show which fret to play the string on. This TAB sign, like the percussion clef, is not a clef in the true sense, but rather a symbol employed instead of a clef. Similarly, the horizontal lines do not constitute a staff in the usual sense, because the spaces between the lines in a tablature are never used.

Notes and rests

Musical note and rest values are not absolutely defined, but are proportional in duration to all other note and rest values. The whole note is the reference value, and the other notes are named (in American usage) in comparison; i.e., a quarter note is a quarter of the length of a whole note.

Note	British name / American name	Rest
	Large (Latin: Maxima) / Octuple whole note (or octuple note)
	Long / Quadruple whole note (or quadruple note)
	Breve / Double whole note (or double note)
	Semibreve / Whole note
	Minim / Half note
	Crotchet / Quarter note
	Quaver / Eighth note For notes of this length and shorter, the note has the same number of flags (or hooks) as the rest has branches.
	Semiquaver / Sixteenth note
	Demisemiquaver / Thirty-second note
	Hemidemisemiquaver / Sixty-fourth note
	Semihemidemisemiquaver / Hundred twenty-eighth note
	Demisemihemidemisemiquaver / Two hundred fifty-sixth note

	Beamed notes Beams connect eighth notes (quavers) and notes of shorter value, and are equivalent in value to flags. In metered music, beams reflect the rhythmic grouping of notes. They may also group short phrases of notes of the same value, regardless of the meter; this is more common in ametrical passages. In older printings of vocal music, beams are often only used when several notes are to be sung on one syllable of the text – melismatic singing; modern notation encourages the use of beaming in a consistent manner with instrumental engraving, and the presence of beams or flags no longer informs the singer. Today, due to the body of music in which traditional metric states are not always assumed, beaming is at the discretion of composers and arrangers, who often use irregular beams to emphasize a particular rhythmic pattern.
	Dotted note Placing a dot to the right of a notehead lengthens the note's duration by one-half. Additional dots lengthen the previous dot instead of the original note, thus a note with one dot is one and one half its original value, a note with two dots is one and three quarters, a note with three dots is one and seven eighths, and so on. Rests can be dotted in the same manner as notes. In other words, n dots lengthen the note's or rest's original d duration to .
	Ghost note A note with a rhythmic value, but no discernible pitch when played. It is represented by an "X" for a note head instead of an oval.
	Multi-measure rest Indicates the number of measures in a resting part without a change in meter to conserve space and to simplify notation. Also called gathered rest or multi-bar rest.

Durations shorter than the 64th are rare but not unknown. 128th notes are used by many composers, including Mozart and Beethoven; 256th notes occur in works by Vivaldi, Mozart and Beethoven. An extreme case is the Toccata Grande Cromatica by early-19th-century American composer Anthony Philip Heinrich, which uses note values as short as 2,048ths; however, the context shows clearly that these notes have one beam more than intended, so they should really be 1,024th notes.^[2]

The name of very short notes can be found with this formula: note, where is the number of flags on the note.

Breaks

	Breath mark In a score, this symbol tells the performer to take a breath (or make a slight pause for non-wind instruments). This pause usually does not affect the overall tempo. For bowed instruments, it indicates to lift the bow and play the next note with a downward (or upward, if marked) bow.
	Caesura Indicates a brief, silent pause, during which time is not counted. In ensemble playing, time resumes when the conductor or leader indicates. For piano this usually means that the player should release all keys and pedals.

Accidentals and key signatures

Common accidentals

Accidentals modify the pitch of the notes that follow them on the same staff position within a measure, unless cancelled by an additional accidental.

	Flat Lowers the pitch of a note by one semitone.
	Sharp Raises the pitch of a note by one semitone.
	Natural Cancels a previous accidental, or modifies the pitch of a sharp or flat as defined by the prevailing key signature (such as F-sharp in the key of G major, for example).
	Double flat Lowers the pitch of a note by two chromatic semitones. Usually used when the note to modify is already flattened by the key signature.
	Double sharp Raises the pitch of a note by two chromatic semitones. Usually used when the note to modify is already sharpened by the key signature.

Key signatures

Key signatures define the prevailing key of the music that follows, thus avoiding the use of accidentals for many notes. If no key signature appears, the key is assumed to be C major/A minor, but can also signify a neutral key, employing individual accidentals as required for each note. The key signature examples shown here are described as they would appear on a treble staff.

Flat key signature Lowers by a semitone the pitch of notes on the corresponding line or space, and all octaves thereof, thus defining the prevailing major or minor key. Different keys are defined by the number of flats in the key signature, starting with the leftmost, i.e., B♭, and proceeding to the right; for example, if only the first two flats are used, the key is B♭ major/G minor, and all B's and E's are "flatted", i.e., lowered to B♭ and E♭.

Sharp key signature Raises by a semitone the pitch of notes on the corresponding line or space, and all octaves thereof, thus defining the prevailing major or minor key. Different keys are defined by the number of sharps in the key signature, also proceeding from left to right; for example, if only the first four sharps are used, the key is E major/C♯ minor, and the corresponding pitches are raised.

Quarter tones

The vast majority of Western music is written and played in 12 equal temperament; as such, there is no universally accepted notation for microtonal music, with varying systems being used depending on the situation. A common notation for quarter tones involves writing the fraction 1/4 next to an arrow pointing up or down. Below are other forms of notation:

	Demiflat Lowers the pitch of a note by one quarter tone. (Another notation for the demiflat is a flat with a diagonal slash through its stem. In systems where pitches are divided into intervals smaller than a quarter tone, the slashed flat represents a lower note than the reversed flat.)
	Flat-and-a-half (sesquiflat) Lowers the pitch of a note by three quarter tones.
	Demisharp Raises the pitch of a note by one quarter tone.
	Sharp-and-a-half (sesquisharp) Raises the pitch of a note by three quarter tones. Occasionally represented with two vertical and three diagonal bars instead.

In 19 equal temperament, where a whole tone is divided into three steps instead of two, music is typically notated in a way that flats and sharps are not usually enharmonic (thus a C♯ represents a third of a step lower than D♭); this has the advantage of not requiring any nonstandard notation.

Time signatures

Time signatures define the meter of the music. Music is "marked off" in uniform sections called bars or measures, and time signatures establish the number of beats in each. This does not necessarily indicate which beats to emphasize, however. A time signature that conveys information about the way the piece actually sounds is thus chosen. Time signatures tend to suggest, but only suggest, prevailing groupings of beats or pulses.

	Specific time – simple time signatures The bottom number represents the note value of the basic pulse of the music (in this case the 4 represents the crotchet or quarter-note). The top number indicates how many of these note values appear in each measure. This example announces that each measure is the equivalent length of three crotchets (quarter-notes). You would pronounce this as "Three Four Time", and was referred to as a "perfect" time.
	Specific time – compound time signatures The bottom number represents the note value of the subdivisions of the basic pulse of the music (in this case the 8 represents the quaver or eighth-note). The top number indicates how many of these subdivisions appear in each measure. Usually each beat is composed of three subdivisions. To derive the unit of the basic pulse in compound meters, double this value and add a dot, and divide the top number by 3 to determine how many of these pulses there are each measure. This example announces that each measure is the equivalent length of two dotted crotchets (dotted quarter-notes). You would pronounce this as "Six Eight Time."
	Common time This symbol is a throwback to fourteenth century rhythmic notation, when it represented 2/4, or "imperfect time". Today it represents 4/4.
	Alla breve or Cut time This symbol represents 2/2 time, indicating two minim (or half-note) beats per measure. Here, a crotchet (or quarter note) would get half a beat.
	Metronome mark Written at the start of a score, and at any significant change of tempo, this symbol precisely defines the tempo of the music by assigning absolute durations to all note values within the score. In this particular example, the performer is told that 120 crotchets, or quarter notes, fit into one minute of time. Many publishers precede the marking with letters "M.M.", referring to Maelzel's Metronome.

Note relationships

	Tie Indicates that the two (or more) notes joined together are to be played as one note with the time values added together. To be a tie, the notes must be identical – that is, they must be on the same line or the same space. Otherwise, it is a slur (see below).
	Slur Indicates to play two or more notes in one physical stroke, one uninterrupted breath, or (on instruments with neither breath nor bow) connected into a phrase as if played in a single breath. In certain contexts, a slur may only indicate to play the notes legato. In this case, rearticulation is permitted. Slurs and ties are similar in appearance. A tie is distinguishable because it always joins exactly two immediately adjacent notes of the same pitch, whereas a slur may join any number of notes of varying pitches. A phrase mark (or less commonly, ligature) is a mark that is visually identical to a slur, but connects a passage of music over several measures. A phrase mark indicates a musical phrase and may not necessarily require that the music be slurred. In vocal music, a phrase mark usually shows how to sing each syllable in the lyrics.
	Glissando or Portamento A continuous, unbroken glide from one note to the next that includes the pitches between. Some instruments, such as the trombone, timpani, non-fretted string instruments, electronic instruments, and the human voice can make this glide continuously (portamento), while other instruments such as the piano or mallet instruments blur the discrete pitches between the start and end notes to mimic a continuous slide (glissando).
	Tuplet A number of notes of irregular duration are performed within the duration of a given number of notes of regular time value; e.g., five notes played in the normal duration of four notes; seven notes played in the normal duration of two; three notes played in the normal duration of four. Tuplets are named according to the number of irregular notes; e.g., duplets, triplets, quadruplets, etc.
	Chord Several notes sounded simultaneously ("solid" or "block"), or in succession ("broken"). Two-note chords are called dyad; three-note chords are called triads. A chord may contain any number of notes.
	Arpeggiated chord A chord with notes played in rapid succession, usually ascending, each note being sustained as the others are played. It is also called a "broken chord".

Dynamics

Dynamics are indicators of the relative intensity or volume of a musical line.

	Pianississimo1 Extremely soft. Very infrequently does one see softer dynamics than this, which are specified with additional ps.
	Pianissimo Very soft. Usually the softest indication in a piece of music, though softer dynamics are often specified with additional ps.
	Piano Soft; louder than pianissimo.
	Mezzo piano Moderately soft; louder than piano.
	Mezzo forte Moderately loud; softer than forte. If no dynamic appears, mezzo-forte is assumed to be the prevailing dynamic level.
	Forte Loud. Used as often as piano to indicate contrast.
	Fortissimo Very loud. Usually the loudest indication in a piece, though louder dynamics are often specified with additional fs (such as fortississimo – seen below).
	Fortississimo1 Extremely loud. Very infrequently does one see louder dynamics than this, which are specified with additional fs.
	Sforzando Literally "forced", denotes an abrupt, fierce accent on a single sound or chord. When written out in full, it applies to the sequence of sounds or chords under or over which it is placed.
	Crescendo A gradual increase in volume. Can be extended under many notes to indicate that the volume steadily increases during the passage.
	Diminuendo Also decrescendo A gradual decrease in volume. Can be extended in the same manner as crescendo.

Other commonly used dynamics build upon these values. For example, "pianississimo" (represented as 'ppp' meaning so softly as to be almost inaudible, and fortississimo, ('fff') meaning extremely loud. In some European countries, use of the loudest dynamics has been strongly discouraged as endangering the hearing of the performers.^[3] A small "s" in front of the dynamic notations means "subito", and means that the dynamic is to change to the new notation rapidly. Subito is commonly used with sforzandos, but all other notations, most commonly as "sff" (subitofortissimo) or "spp" (subitopianissimo).

Forte-piano A section of music in which the music should initially be played loudly (forte), then immediately softly (piano).

Another value that rarely appears is niente, which means "nothing". This may be used at the end of a diminuendo to indicate "fade out to nothing".

¹ Dynamics with 3 letters (i.e., ppp & fff) are often referred to by adding an extra "iss" (pianissimo to pianississimo). This is improper Italian and would translate literally to "softerer" in English, but acceptable as a musical term; such a dynamic can also be described as molto pianissimo or molto fortissimo in somewhat more proper Italian.

Articulation marks

Articulations (or accents) specify how to perform individual notes within a phrase or passage. They can be fine-tuned by combining more than one such symbol over or under a note. They may also appear in conjunction with phrasing marks listed above.

	Staccato This indicates the musician should play the note shorter than notated, usually half the value, the rest of the metric value is then silent. Staccato marks may appear on notes of any value, shortening their performed duration without speeding the music itself.
	Staccatissimo or Spiccato Indicates a longer silence after the note (as described above), making the note very short. Usually applied to quarter notes or shorter. (In the past, this marking’s meaning was more ambiguous: it sometimes was used interchangeably with staccato, and sometimes indicated an accent and not staccato. These usages are now almost defunct, but still appear in some scores.) In string instruments this indicates a bowing technique in which the bow bounces lightly upon the string.
	Accent Play the note louder, or with a harder attack than surrounding unaccented notes. May appear on notes of any duration.
	Tenuto This symbol indicates play the note at its full value, or slightly longer. It can also indicate a slight dynamic emphasis or be combined with a staccato dot to indicate a slight detachment (portato or mezzo staccato).
	Marcato Play the note somewhat louder or more forcefully than a note with a regular accent mark (open horizontal wedge). In organ notation, this means play a pedal note with the toe. Above the note, use the right foot; below the note, use the left foot.
	Left-hand pizzicato or Stopped note A note on a stringed instrument where the string is plucked with the left hand (the hand that usually stops the strings) rather than bowed. On the horn, this accent indicates a "stopped note" (a note played with the stopping hand shoved further into the bell of the horn). In percussion this notation denotes, among many other specific uses, to close the hi-hat by pressing the pedal, or that an instrument is to be "choked" (muted with the hand).
	Snap pizzicato On a stringed instrument, a note played by stretching a string away from the frame of the instrument and letting it go, making it "snap" against the frame. Also known as a Bartók pizzicato.
	Natural harmonic or Open note On a stringed instrument, means to play a natural harmonic (also called flageolet). On a valved brass instrument, means play the note"open" (without lowering any valve, or without mute). In organ notation, this means play a pedal note with the heel (above the note, use the right foot; below the note, use the left foot). In percussion notation this denotes, among many other specific uses, to open the hi-hat by releasing the pedal, or allow an instrument to ring.
	Fermata (Pause) A note, chord, or rest sustained longer than its customary value. Usually appears over all parts at the same metrical location in a piece, to show a halt in tempo. It can be placed above or below the note. The fermata is held for as long as the performer or conductor desires.
	Up bow or Sull'arco On a bowed string instrument, the note is played while drawing the bow upward. On a plucked string instrument played with a plectrum or pick (such as a guitar played pickstyle or a mandolin), the note is played with an upstroke.
	Down bow or Giù arco Like sull'arco, except the bow is drawn downward. On a plucked string instrument played with a plectrum or pick (such as a guitar played pickstyle or a mandolin), the note is played with a downstroke.

Ornaments

Ornaments modify the pitch pattern of individual notes.

	Trill A rapid alternation between the specified note and the next higher note (according to key signature) within its duration. Also called a "shake." When followed by a wavy horizontal line, this symbol indicates an extended, or running, trill. Trills can begin on either the specified root note or the upper auxiliary note, though the latter is more prevalent in modern performances.
	Mordent Rapidly play the principal note, the next higher note (according to key signature) then return to the principal note for the remaining duration. In most music, the mordent begins on the auxiliary note, and the alternation between the two notes may be extended. In hand bells, this symbol is a "shake" and indicates the rapid shaking of the bells for the duration of the note.
	Mordent (inverted) Rapidly play the principal note, the note below it, then return to the principal note for the remaining duration. In much music, the mordent begins on the auxiliary note, and the alternation between the two notes may be extended.
	Turn When placed directly above the note, the turn (also known as a gruppetto) indicates a sequence of upper auxiliary note, principal note, lower auxiliary note, and a return to the principal note. When placed to the right of the note, the principal note is played first, followed by the above pattern. Placing a vertical line through the turn symbol or inverting it, it indicates an inverted turn, in which the order of the auxiliary notes is reversed.
	Appoggiatura The first half of the principal note's duration has the pitch of the grace note (the first two-thirds if the principal note is a dotted note).
	Acciaccatura The acciaccatura is of very brief duration, as though brushed on the way to the principal note, which receives virtually all of its notated duration. In percussion notation, the acciaccatura symbol denotes the flam rudiment, the miniature note still positioned behind the main note but on the same line or space of the staff. The flam note is usually played just before the natural durational subdivision the main note is played on, with the timing and duration of the main note remaining unchanged. Also known by the English translation of the Italian term, crushed note, and in German as Zusammenschlag (simultaneous stroke).

Octave signs

	Ottava The 8va (pronounced ottava alta) sign is placed above the staff (as shown) to tell the musician to play the passage one octave higher. An 8va or, as alternative in modern music, an 8vb sign (both signs reading ottava bassa) is placed below the staff mean play the passage one octave lower.[4][5]
	Quindicesima The 15ma sign is placed above the staff (as shown) to mean play the passage two octaves higher. A 15mb sign below the staff indicates play the passage two octaves lower.

8va and 15ma are sometimes abbreviated further to 8 and 15. When they appear below the staff, the word bassa is sometimes added.

Repetition and codas

	Tremolo A rapidly repeated note. If the tremolo is between two notes, then they are played in rapid alternation. The number of slashes through the stem (or number of diagonal bars between two notes) indicates the frequency to repeat (or alternate the note. As shown here, the note is to be repeated at a demisemiquaver (thirty-second note) rate. In percussion notation, tremolos indicate rolls, diddles, and drags. Typically, a single tremolo line on a sufficiently short note (such as a sixteenth) is played as a drag, and a combination of three stem and tremolo lines indicates a double-stroke roll (or a single-stroke roll, in the case of timpani, mallet percussions and some untuned percussion instrument such as triangle and bass drum) for a period equivalent to the duration of the note. In other cases, the interpretation of tremolos is highly variable, and should be examined by the director and performers. The tremolo symbol also represents flutter-tonguing.
	Repeat signs Enclose a passage that is to be played more than once. If there is no left repeat sign, the right repeat sign sends the performer back to the start of the piece or the nearest double bar.
	Simile marks Denote that preceding groups of beats or measures are to be repeated. In the examples here, the first usually means to repeat the previous measure, and the second usually means to repeat the previous two measures.
	Volta brackets (1st and 2nd endings, or 1st- and 2nd-time bars) A repeated passage is to be played with different endings on different playings; it is possible to have more than two endings (1st, 2nd, 3rd ...).
	Da capo (lit. "From top") Tells the performer to repeat playing of the music from its beginning. This is usually followed by al fine (lit. "to the end"), which means to repeat to the word fine and stop, or al coda (lit. "to the coda (sign)"), which means repeat to the coda sign and then jump forward.
	Dal segno (lit. "From the sign") Tells the performer to repeat playing of the music starting at the nearest segno. This is followed by al fine or al coda just as with da capo.
	Segno Mark used with dal segno.
	Coda Indicates a forward jump in the music to its ending passage, marked with the same sign. Only used after playing through a D.S. al coda (Dal segno al coda) or D.C. al coda (Da capo al coda).

Instrument-specific notation

Guitar

The guitar has a fingerpicking notation system derived from the names of the fingers in Spanish or Latin. They are written above, below, or beside the note to which they are attached. They read as follows:

Piano

Pedal marks

Pedal marks appear in music for instruments with sustain pedals, such as the piano, vibraphone and chimes.

	Engage pedal Tells the player to put the sustaining pedal down.
	Release pedal Tells the player to let the sustain pedal up.
	Variable pedal mark More accurately indicates the precise use of the sustain pedal. The extended lower line tells the player to keep the sustain pedal depressed for all notes below which it appears. The inverted "V" shape (∧) indicates the pedal is to be momentarily released, then depressed again.
	Con sordino, Una corda Tells the player to put the soft pedal down or, in other instruments, apply the mute.
	Senza sordino, Tutte le corde Tells the player to let the soft pedal up or, in other instruments, remove the mute.

Other piano notation

Old (pre-1940) tutors published in the UK may use "English fingering". + for thumb, then 1 (index), 2 (middle), 3 (ring) and 4 (little).^[6]

Stringed instruments

(With the exception of harp)

Four-mallet percussion

Six-mallet percussion

Numbers for six-mallet percussion may be reversed as well.^[7]

See also

• Graphic notation
• Music theory
• Glossary of musical terminology
• Musical Symbols (Unicode block)
• Shape note
• Musical Symbols (disambiguation)

References

External links

• Comprehensive list of music symbols fonts
• Music theory & history (Dolmetsch Online)
• Dictionary of musical symbols (Dolmetsch Online)
• Sight reading tutorial with symbol variations Amy Appleby