Percent sign

The percent sign (%) is the symbol used to indicate a percentage, a number or ratio as a fraction of 100. Related signs include the permille (per thousand) sign ‰ and the permyriad (per ten thousand) sign ‱ (also known as a basis point), which indicate that a number is divided by one thousand or ten thousand respectively. Higher proportions use parts-per notation.

Correct style

Spacing

English style guides prescribe writing the number and percent sign without any space between.^{[1][2][3][4][5][6][7]} However, the International System of Units and ISO 31-0 standard prescribe a space between the number and percent sign,^[8][9][10] in line with the general practice of using a non-breaking space between a numerical value and its corresponding unit of measurement.

Other languages have other rules for spacing in front of the percent sign:

• In Czech, the percent sign is spaced with a non-breaking space if the number is used as a noun,^[11] whereas no space is inserted if the number is used as an adjective (e.g. “a 50% increase”).^[12]
• In Finnish, the percent sign is always spaced, and a case suffix can be attached to it using the colon (e.g. 50 %:n kasvu 'an increase of 50%').^[13]
• In French, the percent sign must be spaced with a non-breaking space.
• In Italian, the percent sign is never spaced.^[14]
• In Spanish, the percent sign must always be spaced now, as almost every other symbol.
• In traditional Russian typography, the percent sign is never spaced. But it is not that common in Russia today.
• In Chinese the percent sign is almost never spaced, probably because Chinese does not use spaces to separate characters or words at all.
• According to the Swedish Language Council, the percent sign should be preceded by a space in Swedish.
• In German the space is prescribed by the regulatory body in the national standard DIN 5008.
• In Persian and Turkish, the percent sign precedes rather than follows the number. In Persian, the slash sign (/) is the equivalent for the decimal point in English and other Latin-based languages. For example, 1 hundredth is written as 0/01. It is thought that the percent sign has evolved in this language from condensation of 0/0 to %. Hence 0/01 (0.01) has evolved to %1 or one percent.

Usage in text

It is often recommended that the percent sign only be used in tables and other places with space restrictions. In running text, it should be spelled out as percent or per cent (often in newspapers). For example, not "Sales increased by 24% over 2006", but rather "Sales increased by 24 percent over 2006".^[15][16][17]

Evolution

Prior to 1425 there is no evidence of a special symbol being used for percentage. The Italian term per cento, "for a hundred", was used as well as several different abbreviations (e.g. "per 100", "p 100", "p cento", etc.). Examples of this can be seen in the 1339 arithmetic text (author unknown) depicted below.^[18] The letter p with its shaft crossed by a horizontal or diagonal strike conventionally stood for per, por, par, or pur in Mediaeval and Renaissance palaeography.^[19]

At some point a scribe of some sort used the abbreviation "pc" with a tiny loop or circle (depicting the ending -o used in Italian numeration for primo, secondo, etc.) This appears in some additional pages of a 1425 text which were probably added around 1435.^[20] This is shown below (source, Rara Arithmetica pg. 440).

The "pc" with a loop eventually evolved into a horizontal fraction sign by 1650 (see below for an example in a 1684 text^[21]) and thereafter lost the "per".^[22]

In 1925 D.E. Smith wrote, "The solidus form () is modern."^[23]

Usage

Encodings

Unicode

The Unicode code points are:

• U+0025 % PERCENT SIGN (HTML %),

• U+2030 ‰ PER MILLE SIGN (HTML ‰ · ‰),

• U+2031 ‱ PER TEN THOUSAND SIGN (HTML ‱) a.k.a. basis point, and

• U+FF05 ％ FULL-WIDTH PERCENT SIGN (HTML ％ · see fullwidth forms)

• U+FE6A ﹪ SMALL PERCENT SIGN (HTML ﹪ · see Small Form Variants)

There is also U+066A ٪ ARABIC PERCENT SIGN (HTML ٪), which has the circles replaced by square dots set on edge.

ASCII

The ASCII code for the percent character is 37, or 0x25 in hexadecimal.

In computers

Names for the percent sign include percent sign (in ITU-T), mod, grapes (in hacker jargon), and the humorous double-oh-seven (in INTERCAL).

In computing, the percent character is also used for the modulo operation in programming languages that derive their syntax from the C programming language, which in turn acquired this usage from the earlier B.^[24]

In the textual representation of URIs, a % immediately followed by a 2-digit hexadecimal number denotes an octet specifying (part of) a character that might otherwise not be allowed in URIs (see percent-encoding).

In SQL, the percent sign is a wildcard character in "LIKE" expressions, for example SELECT * FROM table WHERE fullname LIKE 'Lisa %' will fetch all records whose names start with "Lisa ".

In TeX (and therefore also in LaTeX) and PostScript, a % denotes a line comment.

In BASIC, a trailing % after a variable name marks it as an integer.

In Perl % is the sigil for hashes.

In many programming languages' string formatting operations (performed by functions such as printf), the percent sign denotes parts of the template string that will be replaced with arguments. (See printf format string.) In Python and Ruby the percent sign is also used as the string formatting operator.^[25][26][27]

In the command processors COMMAND.COM (DOS) and CMD.EXE (OS/2 and Windows), %1, %2,... stand for the first, second,... parameters of a batch file. %0 stands for the specification of the batch file itself as typed on the command line. The % sign is also used similarly in the FOR command. %VAR1% represents the value of an environment variable named VAR1. Thus:

set PATH=c:\;%PATH%

sets a new value for PATH, that being the old value preceded by "c:\;". Because these uses give the percent sign special meaning, the sequence %% (two percent signs) is used to represent a literal percent sign, so that:

set PATH=c:\;%%PATH%%

would set PATH to the literal value "c:\;%PATH%".

In the C Shell, % is part of the default command prompt.

In linguistics

In linguistics, the percent sign is prepended to an example string to show that it is judged well-formed by some speakers and ill-formed by others. This may be due to differences in dialect or even individual idiolects. This is similar to the asterisk to mark ill-formed strings, the question mark to mark strings where well-formedness is unclear, and the number sign to mark strings that are syntactically well-formed but semantically nonsensical.

See also

• Metacharacter

Notes

References

• Smith, D.E. (1898), Rara Arithmetica: a catalogue of the arithmetics written before MDCI, with description of those in the library of George Arthur Plimpton of New York, Boston: Ginn 
• Smith, D.E. (1925), History of Mathematics, Boston: Ginn