Winchester Model 21

Winchester Model 21
Type Shotgun
Place of origin  United States
Production history
Manufacturer Winchester
Produced 1930–1961
Number built 30,000
Specifications
Cartridge 12, 16, 20, 28 gauge, and .410 bore
Feed system Manual, break open action

The Winchester Model 21 is a deluxe side by side shotgun. The shotgun's initial production run from 1931 through 1960 yielded approximately 30,000 guns. Winchester Repeating Arms Company ceased the main production line of this shotgun in 1960 and the Model 21 was sourced to the Winchester Custom Shop until the gun's retirement in 1991. New Winchester Model 21 production continues under license to Connecticut Shotgun Manufacturing Company. [1]

The Winchester Model 21 action is of a typical breech loading shotgun, commonly called a break or hinge action. Like all quality double guns, production is time-consuming due to the laborious process of joining the barrels to produce an identical convergence of shot. The Model 21 was Winchester's effort to make a quality side by side shotgun to rival those of high-end makers such as Parker and Fox; financial troubles plagued the gun's development until the Western Cartridge Company purchased Winchester Repeating Arms in 1931.[2] The Model 21 has a considerable collectors following as it is regarded as almost a bespoke shotgun.[3]

Production from 1931–1959

Model 21 grades at this time were chambered in 12, 16 and 20 gauge. .410 bore was offered in Custom Grade only and is extremely rare only exceeded by the sparse(8 known) 28 gauge guns produced. Barrel lengths were offered from 26 inches to 32 inches. The undersides of the trigger plates were typically stamped with the name of the grade.[4]

-Standard- This grade included barrels with a matte or vented rib, select grade walnut stocks featured in a straight or pistol grip configuration.

-Tournament- Produced from 1933–1944. Identical to the standard grade except with the trigger plate being stamped "TOURNAMENT."

-Trap- A higher grade tournament gun with higher quality wood and a stock made to a customers dimensions. The trigger plate is marked "TRAP."

-Skeet- Identical to Trap grade, but available in 28 gauge (8 known to exist). The trigger plate marked as "SKEET."

-Duck/Magnum- These grades were offered with features found in the Standard grade. The Duck variant built from 1940-1952, was chambered only for 12 gauge 3 inch shells and featured the trigger plate marked "DUCK." The Magnum version was offered from 1953–1959 in both 12 and 20 gauge, with 3 inch chambers. This Magnum grade featured no trigger plate markings.

-Custom/Deluxe- This particular grade included a stock which was custom fit to the customer. The top rib was marked "CUSTOM BUILT" and the bottom trigger plate was marked "DELUXE."

Custom Shop Production 1960–1991

Model 21 grades were offered in 12, 16, 20, 28 gauge and .410 bore with 16 gauge being the rarest. Barrels were produced in lengths from 26 inches to 32 inches. Select engraved models were available in 6 different patterns, with a higher number indicating more embellished engraving.[5]

- Custom Grade- Grade includes a matte center rib, a choice of a straight or pistol grip stock with fancy walnut and a checkered stock with matching forend.

- Pigeon Grade- Identical to the above but this grade offers a matte or ventilated center rib, a higher quality stock with custom leather recoil pad, matching forend, and a gold engraved pistol grip cap. The receiver was engraved with the number 6 pattern. This grade was dropped in 1982

- Grand American- Identical to the Pigeon grade, except the receiver was engraved with in the number 6 pattern with gold inlays. This grade was shipped with one extra set of barrels of the same gauge and forend in its own leather trunk case.

- Grand American Small Gauge- Offered starting in 1982, the firearm was shipped with both a 28 gauge and .410 bore barrel set, with matching forends.

Notes

  1. "Connecticut Shotgun Manufacturing Company".
  2. "Winchester Repeating Arms Company".
  3. "Winchester Model 21 Collecting".
  4. Schider, Dan (2011). 2011 Standard Cataloge of Firearms. Krause Publications. pp. 1333–1334. ISSN 1520-4928.
  5. Schider, Dan (2011). 2011 Standard Cataloge of Firearms. Krause Publications. p. 1334. ISSN 1520-4928.

Resources

http://www.winchestercollector.org/guns/model21.shtml