Well logging

Well logging, also known as borehole logging is the practice of making a detailed record (a well log) of the geologic formations penetrated by a borehole. The log may be based either on visual inspection of samples brought to the surface (geological logs) or on physical measurements made by instruments lowered into the hole (geophysical logs). Some types of geophysical well logs can be done during any phase of a well's history: drilling, completing, producing, or abandoning. Well logging is performed in boreholes drilled for the oil and gas, groundwater, mineral and geothermal exploration, as well as part of environmental and geotechnical studies.

Wireline logging

Wireline log consisting of caliper, density and resistivity logs
Wireline log consisting of a complete set of logs

The oil and gas industry uses wireline logging to obtain a continuous record of a formation's rock properties. Wireline logging can be defined as being "The acquisition and analysis of geophysical data performed as a function of well bore depth, together with the provision of related services." Note that "wireline logging" and "mud logging" are not the same, yet are closely linked through the integration of the data sets. The measurements are made referenced to "TAH" - True Along Hole depth: these and the associated analysis can then be used to infer further properties, such as hydrocarbon saturation and formation pressure, and to make further drilling and production decisions.

Wireline logging is performed by lowering a 'logging tool' - or a string of one or more instruments - on the end of a wireline into an oil well (or borehole) and recording petrophysical properties using a variety of sensors. Logging tools developed over the years measure the natural gamma ray, electrical, acoustic, stimulated radioactive responses, electromagnetic, nuclear magnetic resonance, pressure and other properties of the rocks and their contained fluids. For this article, they are broadly broken down by the main property that they respond to.

The data itself is recorded either at surface (real-time mode), or in the hole (memory mode) to an electronic data format and then either a printed record or electronic presentation called a "well log" is provided to the client, along with an electronic copy of the raw data. Well logging operations can either be performed during the drilling process (see Logging While Drilling), to provide real-time information about the formations being penetrated by the borehole, or once the well has reached Total Depth and the whole depth of the borehole can be logged.

Real-time data is recorded directly against measured cable depth. Memory data is recorded against time, and then depth data is simultaneously measured against time. The two data sets are then merged using the common time base to create an instrument response versus depth log. Memory recorded depth can also be corrected in exactly the same way as real-time corrections are made, so there should be no difference in the attainable TAH accuracy.

The measured cable depth can be derived from a number of different measurements, but is usually either recorded based on a calibrated wheel counter, or (more accurately) using magnetic marks which provide calibrated increments of cable length. The measurements made must then be corrected for elastic stretch and temperature.[1]

There are many types of wireline logs and they can be categorized either by their function or by the technology that they use. "Open hole logs" are run before the oil or gas well is lined with pipe or cased. "Cased hole logs" are run after the well is lined with casing or production pipe.[2]

Wireline logs can be divided into broad categories based on the physical properties measured.

History

Conrad and Marcel Schlumberger, who founded Schlumberger Limited in 1926, are considered the inventors of electric well logging. Conrad developed the Schlumberger array, which was a technique for prospecting for metal ore deposits, and the brothers adapted that surface technique to subsurface applications. On September 5, 1927, a crew working for Schlumberger lowered an electric sonde or tool down a well in Pechelbronn, Alsace, France creating the first well log. In modern terms, the first log was a resistivity log that could be described as 3.5-meter upside-down lateral log.[3]

In 1931, Henri George Doll and G. Dechatre, working for Schlumberger, discovered that the galvanometer wiggled even when no current was being passed through the logging cables down in the well. This led to the discovery of the spontaneous potential (SP) which was as important as the ability to measure resistivity. The SP effect was produced naturally by the borehole mud at the boundaries of permeable beds. By simultaneously recording SP and resistivity, loggers could distinguish between permeable oil-bearing beds and impermeable nonproducing beds.[4]

In 1940, Schlumberger invented the spontaneous potential dipmeter; this instrument allowed the calculation of the dip and direction of the dip of a layer. The basic dipmeter was later enhanced by the resistivity dipmeter (1947) and the continuous resistivity dipmeter (1952).

Oil-based mud (OBM) was first used in Rangely Field, Colorado in 1948. Normal electric logs require a conductive or water-based mud, but OBMs are nonconductive. The solution to this problem was the induction log, developed in the late 1940s.

The introduction of the transistor and integrated circuits in the 1960s made electric logs vastly more reliable. Computerization allowed much faster log processing, and dramatically expanded log data-gathering capacity. The 1970s brought more logs and computers. These included combo type logs where resistivity logs and porosity logs were recorded in one pass in the borehole.

The two types of porosity logs (acoustic logs and nuclear logs) date originally from the 1940s. Sonic logs grew out of technology developed during World War II. Nuclear logging has supplemented acoustic logging, but acoustic or sonic logs are still run on some combination logging tools.

Nuclear logging was initially developed to measure the natural gamma radiation emitted by underground formations. However, the industry quickly moved to logs that actively bombard rocks with nuclear particles. The gamma ray log, measuring the natural radioactivity, was introduced by Well Surveys Inc. in 1939, and the WSI neutron log came in 1941. The gamma ray log is particularly useful as shale beds which often provide a relatively low permeability cap over hydrocarbon reservoirs usually display a higher level of gamma radiation. These logs were important because they can be used in cased wells (wells with production casing). WSI quickly became part of Lane-Wells. During World War II, the US Government gave a near wartime monopoly on open-hole logging to Schlumberger, and a monopoly on cased-hole logging to Lane-Wells.[5] Nuclear logs continued to evolve after the war.

The nuclear magnetic resonance log was developed in 1958 by Borg Warner. Initially the NMR log was a scientific success but an engineering failure. However, the development of a continuous NMR logging tool by Numar (now a subsidiary of Halliburton) is a promising new technology.

Many modern oil and gas wells are drilled directionally. At first, loggers had to run their tools somehow attached to the drill pipe if the well was not vertical. Modern techniques now permit continuous information at the surface. This is known as logging while drilling (LWD) or measurement-while-drilling (MWD). MWD logs use mud pulse technology to transmit data from the tools on the bottom of the drillstring to the processors at the surface.

Electrical logs

Resistivity Log

Resistivity logging measures the subsurface electrical resistivity, which is the ability to impede the flow of electrical current. This helps to differentiate between formations filled with salty waters (good conductors of electricity) and those filled with hydrocarbons (poor conductors of electricity). Resistivity and porosity measurements are used to calculate water saturation. Resistivity is expressed in ohms or ohms\meter, and is frequently charted on a logarithm scale versus depth because of the large range of resistivity. The distance from the borehole penetrated by the current varies with the tool, from a few centimeters to one meter.

Image log

Image logs use a rotating transducer to measure acoustic impedance across the entire borehole wall.[6] This can then be used to identify the presence and direction of rock fractures, as well as understanding the dip direction of the stratigraphy.

Porosity logs

Porosity logs measure the fraction or percentage of pore volume in a volume of rock. Most porosity logs use either acoustic or nuclear technology. Acoustic logs measure characteristics of sound waves propagated through the well-bore environment. Nuclear logs utilize nuclear reactions that take place in the downhole logging instrument or in the formation. Nuclear logs include density logs and neutron logs, as well as gamma ray logs which are used for correlation. [7] The basic principle behind the use of nuclear technology is that a neutron source placed near the formation whose porosity is being measured will result in neutrons being scattered by the hydrogen atoms, largely those present in the formation fluid. Since there is little difference in the neutrons scattered by hydrocarbons or water, the porosity measured gives a figure close to the true physical porosity whereas the figure obtained from electrical resistivity measurements is that due to the conductive formation fluid. The difference between neutron porosity and electrical porosity measurements therefore indicates the presence of hydrocarbons in the formation fluid.

Density

See also: Density logging

The density log measures the bulk density of a formation by bombarding it with a radioactive source and measuring the resulting gamma ray count after the effects of Compton Scattering and Photoelectric absorption. This bulk density can then be used to determine porosity.

Neutron porosity

The neutron porosity log works by bombarding a formation with high energy epithermal neutrons that lose energy through elastic scattering to near thermal levels before being absorbed by the nuclei of the formation atoms. Depending on the particular type of neutron logging tool, either the gamma ray of capture, scattered thermal neutrons or scattered, higher energy epithermal neutrons are detected.[8] The neutron porosity log is predominantly sensitive to the quantity of hydrogen atoms in a particular formation, which generally corresponds to rock porosity.

Boron is known to cause anomalously low neutron tool count rates due to it having a high capture cross section for thermal neutron absorption.[9] An increase in hydrogen concentration in clay minerals has a similar effect on the count rate.

Sonic

See also: Sonic logging

A sonic log provides a formation interval transit time, which typically varies lithology and rock texture but particularly porosity. The logging tool consists of a piezoelectric transmitter and receiver and the time taken to for the sound wave to travel the fixed distance between the two is recorded as an interval transit time.

Lithology logs

Gamma ray

A log of the natural radioactivity of the formation along the borehole, measured in API, particularly useful for distinguishing between sands and shales in a siliclastic environment.[10] This is because sandstones are usually nonradioactive quartz, whereas shales are naturally radioactive due to potassium isotopes in clays, and adsorbed uranium and thorium.

Self/spontaneous potential

The Spontaneous Potential (SP) log measures the natural or spontaneous potential difference between the borehole and the surface, without any applied current. It was one of the first wireline logs to be developed, found when a single potential electrode was lowered into a well and a potential was measured relative to a fixed reference electrode at the surface.[11]

The most useful component of this potential difference is the electrochemical potential because it can cause a significant deflection in the SP response opposite permeable beds. The magnitude of this deflection depends mainly on the salinity contrast between the drilling mud and the formation water, and the clay content of the permeable bed. Therefore the SP log is commonly used to detect permeable beds and to estimate clay content and formation water salinity.

Miscellaneous

Caliper

See also: Caliper log

A tool that measures the diameter of the borehole, using either 2 or 4 arms.[10] It can be used to detect regions where the borehole walls are compromised and the well logs may be less reliable.

Nuclear magnetic resonance

Nuclear magnetic resonance (NMR) logging uses the NMR response of a formation to directly determine its porosity and permeability, providing a continuous record along the length of the borehole.[12][13]

Spectral noise logging

Spectral noise logging (SNL) is an acoustic noise measuring technique used in oil and gas wells for well integrity analysis, identification of production and injection intervals and hydrodynamic characterisation of the reservoir. SNL records acoustic noise generated by fluid or gas flow through the reservoir or leaks in downhole well components.

Noise logging tools have been used in the petroleum industry for several decades. As far back as 1955, an acoustic detector was proposed for use in well integrity analysis to identify casing holes.[14] Over many years, downhole noise logging tools proved effective in inflow and injectivity profiling of operating wells,[15][16] leak detection,[17][18] location of cross-flows behind casing,[19] and even in determining reservoir fluid compositions.[20] Robinson (1974) described how noise logging can be used to determine effective reservoir thickness.[21]

Logging while drilling

In the 1970s, a new approach to wireline logging was introduced in the form of logging while drilling (LWD). This technique provides similar well information to conventional wireline logging but instead of sensors being lowered into the well at the end of wireline cable, the sensors are integrated into the drill string and the measurements are made in real-time, whilst the well is being drilled. This allows drilling engineers and geologists to quickly obtain information such as porosity, resistivity, hole direction and weight-on-bit and they can use this information to make immediate decisions about the future of the well and the direction of drilling.[22]

In LWD, measured data is transmitted to the surface in real time via pressure pulses in the well's mud fluid column. This mud telemetry method provides a bandwidth of less than 10 bits per second, although, as drilling through rock is a fairly slow process, data compression techniques mean that this is an ample bandwidth for real-time delivery of information. A higher sample rate of data is recorded into memory and retrieved when the drillstring is withdrawn at bit changes. High-definition downhole and subsurface information is available through networked or wired drillpipe that deliver memory quality data in real time.[23]

Memory log

This method of data acquisition involves recording the sensor data into a down hole memory, rather than transmitting "Real Time" to surface. There are some advantages and disadvantages to this memory option.

Coring

See also: Core sample
An example of a granite core

Coring is the process of obtaining an actual sample of a rock formation from the borehole. There are two main types of coring: 'full coring', in which a sample of rock is obtained using a specialised drill-bit as the borehole is first penetrating the formation and 'sidewall coring', in which multiple samples are obtained from the side of the borehole after it has penetrated through a formation. The main advantage of sidewall coring over full coring are that it is cheaper (drilling doesn't have to be stopped) and multiple samples can be easily acquired, with the main disadvantages being that there can be uncertainty in the depth at which the sample was acquired and the tool can fail to acquire the sample.[24][25]

Mudlogging

See also: Mud logging

Mud logs are well logs prepared by describing rock or soil cuttings brought to the surface by mud circulating in the borehole. In the oil industry they are usually prepared by a mud logging company contracted by the operating company. One parameter a typical mud log displays is the formation gas (gas units or ppm). "The gas recorder usually is scaled in terms of arbitrary gas units, which are defined differently by the various gas-detector manufactures. In practice, significance is placed only on relative changes in the gas concentrations detected."[26] The current oil industry standard mud log normally includes real-time drilling parameters such as rate of penetration (ROP), lithology, gas hydrocarbons, flow line temperature (temperature of the drilling fluid) and chlorides but may also include mud weight, estimated pore pressure and corrected d-exponent (corrected drilling exponent) for a pressure pack log. Other information that is normally notated on a mud log include directional data (deviation surveys), weight on bit, rotary speed, pump pressure, pump rate, viscosity, drill bit info, casing shoe depths, formation tops, mud pump info, to name just a few.

Information use

In the oil industry, the well and mud logs are usually transferred in 'real time' to the operating company, which uses these logs to make operational decisions about the well, to correlate formation depths with surrounding wells, and to make interpretations about the quantity and quality of hydrocarbons present. Specialists involved in well log interpretation are called log analysts.

See also

References

  1. ↑ Harald Bolt, Wireline Depth Determination, Rev 3.3, Apr 2012, available via Society of Professional Well Log Analysts web site, www.spwla.org
  2. ↑ Society of Professional Well Log Analysts (1975). Glossary of terms & expressions used in well logging. Houston, Texas: SPWLA. p. 74 p.
  3. ↑ Hilchie, Douglas W. (1990). Wireline: A history of the well logging and perforating business in the oil fields. Boulder, Colorado: Privately Published. p. 200.
  4. ↑ Pike, Bill; Rhonda Duey (2002). "Logging history rich with innovation" (– SCHOLAR SEARCH). Hart's E&P: 52–55. Retrieved 2008-06-02.
  5. ↑ Now a division of Baker Hughes
  6. ↑ Crains Petrophysical Handbook
  7. ↑ Sengel, E.W. "Bill" (1981). Handbook on well logging. Oklahoma City, Oklahoma: Institute for Energy Development. p. 168 p. ISBN 0-89419-112-8.
  8. ↑ Schlumberger Oilfield Glossary
  9. ↑ Etnyre, L.M. (1989). Finding Oil and Gas from Well Logs. Kluwer Academic Publishers. p. 249 p. ISBN 978-0442223090.
  10. ↑ 10.0 10.1 Darling, Toby (2005). Well Logging and Formation Evaluation. Oxford, UK: Elsevier. p. 5 p. ISBN 0-7506-7883-6.
  11. ↑ Etnyre, L.M. (1989). Finding Oil and Gas from Well Logs. Kluwer Academic Publishers. p. 220 p. ISBN 978-0442223090.
  12. ↑ Gluyas, J. & Swarbrick, R. (2004) Petroleum Geoscience. Publ. Blackwell Publishing
  13. ↑ Nuclear Magnetic Resonance Imaging – Technology of the 21st century. Kenyon, Kleinberg, Straley, Gubelin, and Morris. Oilfield Review. http://eps.mcgill.ca/~courses/c550/Literature/NMR-21st-century.pdf
  14. ↑ Enright, R.J. 1955. Sleuth for Down-Hole Leaks, Oil & Gas J.:78-79
  15. ↑ Britt E.L. 1976. Theory and applications of the borehole audio tracer survey, the SPWLA Seventeenth Annual Logging Symposium, Denver, Colorado
  16. ↑ Spectral Noise Logging Data Processing Technology
  17. ↑ Leak Detection by Temperature and Noise Logging
  18. ↑ Innovative Logging Tool Using Noise Log and High Precision Temperature Help to Diagnoses Complex Problems
  19. ↑ McKinley, R.M. 1994. Temperature, Radioactive Tracer, and Noise Logging for Well Integrity: 112-156
  20. ↑ Wang J, Alex van der Spek et al. 1999. Characterizing Sound Generated by Multiphase Flow, SPE Annual Technical Conference and Exhibition held in Houston, Texas
  21. ↑ Robinson W.S. 1974. Field Results From the Noise-Logging Technique, 49th Annual Fall Meeting of the SPE of AIME in Houston, Texas
  22. ↑ Rigzone How Does Logging-While-Drilling (LWD) Work?
  23. ↑ Ali, T.H.; M. Sas, J.H. Hood, S.R. Lemke, A. Srinivasan (2008). "High Speed Telemetry Drill Pipe Network Optimizes Drilling Dynamics And Wellbore Placement". Society of Petroleum Engineers. Retrieved 25 September 2012.
  24. ↑ Halliburton. Sidewall Coring
  25. ↑ Schlumberger Oilfield Glossary. Core
  26. ↑ Bourgoyne, Adam; Keith Millheim, Martin Chenevert, F.S. Young Jr. (1986). Applied Drilling Engineering. Richardson, TX: Society of Petroleum Engineers. p. 274 p. ISBN 1-55563-001-4.

External links