Weesener Bach

Weesener Bach
Pond at the source of the Weesener Bach
Location Lower Saxony, Germany
Length 13.7 Km
Source south of Lutterloh
52°49′01″N 10°12′46″E / 52.8170472°N 10.2128389°ECoordinates: 52°49′01″N 10°12′46″E / 52.8170472°N 10.2128389°E
Source height 80 m above sea level (NN)
Mouth north of Hermannsburg
52°50′31″N 10°05′47″E / 52.8420778°N 10.0963194°E
Mouth height 51 m above sea level (NN)
Descent 29 m
Basin Örtze → Aller → Weser
Villages Lutterloh, Weesen, Hermannsburg

The Weesener Bach, also called the Lutterbach, is a tributary of the river Örtze in northern Germany. It rises in the Südheide Nature Park, south of the village of Lutterloh near Unterlüß, then flows through the Hermannsburg village of Weesen and enters the Örtze north of Hermannsburg after about 10.5 km. The source of the stream lies at 84 m above sea level, its mouth is 54 m above sea level, giving a height difference of 30 metres. Originally the Weesener Bach emerged from a bog region. Most of this was converted into ponds. The ponds have become overgrown in many areas with Water Horsetail. The entire course of the stream together with the banks either side, a total of 348 hectares (860 acres), was declared a nature reserve in 1999.[1] As a result, an almost natural, totally healthy stream has been preserved, whose water quality, apart from its upper course near the source ponds, is of the highest category, I-II, and only slightly polluted.[2] Due to its high water quality, the stream is home to a multitude of rare animals. Amongst the fish that thrive here are Brown Trout, Bullhead and Brook Lamprey. In 1987, 176 species of animals were recorded here, of which 36 were on the IUCN's Red List of Threatened Species. Along the banks and water meadows there are 60 more endangered species, such as vascular plants, mosses, amphibians and reptiles. Even the Kingfisher lives here.

Near the mouth of the stream there is still a water mill (the Luttermühle) with an overshoot water wheel. The mill has been in operation since 1757 as a sawmill.

In order to feed water to the mill, a 1 kilometre long canal was dug with which the water course was raised. Immediately in front of the sawmill a large pond was excavated. This pond was needed in order to provide additional water to generate more power for the water wheel. When particularly high levels of power were needed for the saw, for example, to cut large oak tree logs, the additional water was indispensable. In former times, the canal was closed once a year, the water was then fed into the old stream bed, and the sand that had been washed into the pond and deposited there was shovelled out. Due to the enormous amount of work that this entailed, this process was later given up. A separate drainage channel was laid and, from time to time, the pond is allowed to empty very rapidly.

Originally there was also a flour mill and a tannery here. At that time the water was diverted either to the sawmill or to the overshoot water wheel of the flour mill. As a rule the sawmill's water wheel was driven during the day and the flour mill's wheel at night. Operations ceased when there was a fire in 1995. The water wheel at the sawmill was replaced and sometimes drives an electrical generator.

References

  1. ↑ Overview map
  2. ↑ Water quality levels