Walter HWK 109-509

HWK 109-509
HWK 109-509A on display at the Luftwaffenmuseum, Berlin-Gatow, Germany
Type	Rocket engine
Manufacturer	Hellmuth Walter Kommanditgesellschaft
First run	1943
Major applications	Messerschmitt Me 163 Bachem Ba 349

The HWK 109-509 was a German liquid-fuel bipropellant rocket engine that powered the Messerschmitt Me 163 and Bachem Ba 349 aircraft. It was produced by Hellmuth Walter Kommanditgesellschaft (HWK) commencing in 1943.

Design and development

The HWK 109-509 used a two-component hypergolic fuel/oxidizer combination, controlled by a dual-flow turbopump, to regulate the rate of combustion and thereby the amount of thrust. The turbopump was driven by steam produced by a Walter steam generator which decomposed T-Stoff in the presence of a solid catalyst.^[1] The engine worked on the principle of the "hot" Walter drive, which used C-Stoff in place of Z-Stoff, the latter tending to clog the jets in the combustion chamber, causing fluctuations in power and potentially explosions.

The fuel was known as C-Stoff, a mix of 30% hydrazine hydrate + 57% methanol + 13% water with a small amount of potassium-copper-cyanide. The oxidizer, known as T-Stoff, consisted of a hydrogen peroxide-based formulation, which reacted violently on contact with the C-Stoff fuel, as a hypergolic propellant combination.^[2] The violent combustion process resulted in the formation of water, carbon dioxide and nitrogen, and a huge amount of heat sending out a superheated stream of steam, nitrogen and air that was drawn in through the hole in the mantle of the engine, thus providing a forward thrust of approximately 17 kN (3,800 lbf).

The engine was an integral design with all components of the drive, with the exception of fuel tanks, locked in a frame.

Variants

• A-0: Pre-production model, manufactured from May 1943. The thrust of this engine was regulated between 300 kp (2.9 kN) and 1500 kp (14.7 kN (3,300 lbf)).
• A-1: The first series production engine was used in the Messerschmitt Me 163 B from August 1944. The thrust here was adjustable between 100 kp (1 kN) and 1600 kp (15.7 kN (3,500 lbf)).
• A-2: Version for the Messerschmitt Me 163B-1a. Weighing only 100 kg (220 lb) complete, this engine consisted of two main assemblies, the roughly-cubical shape framed forward assembly comprising the turbine housing, the fuel pumps geared to the turbine shaft, the control box, a pressure-reducing valve and the electric starter motor, with the aft assembly made up of the combustion chamber, connected to the fore unit by a cylindrical "thrust-tube" containing pipes which carried fuel to the combustion chamber's individual injector jets. The thrust was adjustable between 200 kp (2 kN (450 lbf)) and a maximum of 1700 kp (16.7 kN (3,800 lbf)).

The HWK 109-509B dual-chamber version, on display at the NMUSAF

• B-1: Increased performance version of the A-1. This engine had a second, "cruising" combustion chamber, nicknamed the Marschofen, just below the main combustion chamber, with an additional thrust of 300 kp (2.9 kN (650 lbf)). This auxiliary chamber proved necessary due to the actual T-Stoff oxidizer consumption of the main unit, at nearly 5 kg/s, exceeding estimates by 100%. Thrust from main chamber adjustable between 100 kp (1 kN (220 lbf)) and 2000 kp (19.6 kN (4,400 lbf)).
• C-1: Dual-chamber motor like the B-series, based on the uprated version of the A-2. The main combustion chamber gave between 400 kp (3.9 kN (880 lbf)) and 2000 kp (19.6 kN (4,400 lbf)), the Marschofen auxiliary chamber 400 kp (3.9 kN (880 lbf)). To be used in the Me 263 (Ju 248).
• D-1: Variant of the C-1 for use in the improved B-series airframes of the Bachem Ba 349 Natter. Engine designed to be recovered by parachute, along with the entire rear section with empennage.
• S-2 A completely revised lightened version for use as a permnanently-installed booster rocket on the Messerschmitt Me 262 Heimatschützer IV home defence interceptor.
• 'HWK RII-211 - Company designation for prototype engines of the 109-509A-2 series

Applications

• Arado Ar E.381
• Bachem Ba 349
• Focke-Wulf Volksjäger 2
• Messerschmitt Me 163
• Messerschmitt Me 262C, in Heimatschützer prototype evaluation designs.

Engines on display

• National Museum of the United States Air Force (both single-chamber -A and twin-chamber -B versions)
• National Museum of Flight
• Luftwaffenmuseum der Bundeswehr
• Shuttleworth Collection
• Ballarat Aviation Museum

Specifications (109-509A)

Data from: Jane's ^[3]

General characteristics

• Type: Liquid-fuelled rocket engine
• Length:
• Diameter:
• Dry weight: 165.5 kg (365 lb)
• Fuel: T-Stoff (Hydrogen peroxide) oxidizer and C-Stoff (hydrazine hydrate/alcohol mix) fuel propellants

Components

• Pumps:

Performance

• Thrust: 14.7 kN (3,300 lbf)
• Burn time:

  
  

• Specific fuel consumption: 20lb/hr/lbf (1800 N.s/kg)

See also

Related lists

• List of aircraft engines
• List of aircraft engines of Germany during World War II

References

Notes

Bibliography

External links

Wikimedia Commons has media related to Walter HWK 109-509.

• The Hellmuth Walter Rocket Engine

Flown rocket engines and rocket motors Liquid fuel Cryogenic (LH2/LOX) US J-2 RL10 RS-68 RS-25 (SSME) EU HM7B Vulcain Russia RD-0120 KVD-1 (RD-56) Japan LE-5 LE-7 China YF-50T YF-73 YF-75 YF-75D YF-77 India CE-7.5 CE-20 Semi-cryogenic (RP-1/LOX) US F-1 H-1 Kestrel Merlin 1 RS-27A EU RZ2 Russia NK-33 RD-0124 RD-107 RD-117 RD-120 RD-170 RD-180 RD-191 RD-58 RD-8 India SCE-200 Hypergolic Aerozine 50/N2O4 AJ10 LMDE TR-201 LMAE LR-87 UH 25/N2O4 Viking UDMH/N2O4 RD-253 RD-270 Vikas MMH/N2O4 Aestus Draco R-4D RP-1/H2O2 Gamma Stentor other Dushkin S-155 Walter HWK 109-509 Solid fuel Castor 30 Star 37 Star 48 P80 P230 Space Shuttle Solid Rocket Booster Inertial Upper Stage 1.5KS35000 1.8KS7800 1.9KS2150 Jetex engine Waxwing Related articles Comparison of orbital rocket engines