Velocity

This article is about velocity in physics. For other uses, see Velocity (disambiguation).

Velocity
As a change of direction occurs while the cars turn on the curved track, their velocity is not constant.
Common symbols	v, v
SI unit	m/s

Classical mechanics
$\vec{F} = m\vec{a}$ Second law of motion
History Timeline
Branches Applied Celestial Continuum Dynamics Kinematics Kinetics Statics Statistical
Fundamentals Acceleration Angular momentum Couple D'Alembert's principle Energy kinetic potential Force Frame of reference Impulse Inertia / Moment of inertia Mass Mechanical power Mechanical work Moment Momentum Space Speed Time Torque Velocity Virtual work
Formulations Newtonian mechanics (vectorial mechanics) Analytical mechanics Lagrangian mechanics Hamiltonian mechanics
Core topics Damping (ratio) Displacement Equations of motion Euler's laws of motion Fictitious force Friction Harmonic oscillator Inertial / Non-inertial reference frame Mechanics of planar particle motion Motion (linear) Newton's law of universal gravitation Newton's laws of motion Relative velocity Rigid body dynamics Euler's equations Simple harmonic motion Vibration
Rotation Circular motion Rotating reference frame Centripetal force Centrifugal force reactive rotating reference frame Coriolis force Pendulum Tangential speed Rotational speed Angular acceleration / displacement / frequency / velocity
Scientists Galileo Newton Kepler Horrocks Halley Euler d'Alembert Clairaut Lagrange Laplace Hamilton Poisson Daniel Bernoulli Johann Bernoulli Cauchy

Velocity is the rate of change of the displacement, the difference between the final and initial position of an object. Velocity is equivalent to a specification of its speed and direction of motion, e.g. 60 km/h to the north. Velocity is an important concept in kinematics, the branch of classical mechanics which describes the motion of bodies.

Velocity is a vector physical quantity; both magnitude and direction are required to define it. The scalar absolute value (magnitude) of velocity is called "speed", a quantity that is measured in metres per second (m/s or m·s⁻¹) in the SI (metric) system. For example, "5 metres per second" is a scalar (not a vector), whereas "5 metres per second east" is a vector.

If there is a change in speed, direction, or both, then the object has a changing velocity and is said to be undergoing an acceleration.

Constant velocity vs acceleration

To have a constant velocity, an object must have a constant speed in a constant direction. Constant direction constrains the object to motion in a straight path (the object's path does not curve). Thus, a constant velocity means motion in a straight line at a constant speed.

For example, a car moving at a constant 20 kilometres per hour in a circular path has a constant speed, but does not have a constant velocity because its direction changes. Hence, the car is considered to be undergoing an acceleration.

Distinction between speed and velocity

Speed describes only how fast an object is moving, whereas velocity gives both how fast and in what direction the object is moving.^[1] If a car is said to travel at 60 km/h, its speed has been specified. However, if the car is said to move at 60 km/h to the north, its velocity has now been specified.

The big difference can be noticed when we consider movement around a circle. When something moves in a circle and returns to its starting point its average velocity is zero but its average speed is found by dividing the circumference of the circle by the time taken to move around the circle. This is because the average velocity is calculated by only considering the displacement between the starting and the end points while the average speed considers only the total distance traveled.

Equation of motion

Average velocity

Velocity is defined as the rate of change of position with respect to time. Sometimes it is easier, or even necessary, to work with the "average velocity" of an object, that is to say the constant velocity, that would provide the same resultant displacement as a variable velocity, $v (t)$ , over some time period $Δ t$ . Average velocity can be calculated as:

\boldsymbol{\bar{v}} = \frac{\Delta\boldsymbol{x}}{\Delta\mathit{t}}

The average velocity is always less than or equal to the average speed of an object. This can be seen by realizing that while distance is always strictly increasing, displacement can increase or decrease in magnitude as well as change direction.

In terms of a displacement-time (x vs. t) graph, the instantaneous velocity (or, simply, velocity) can be thought of as the slope of the tangent line to the curve at any point, and the average velocity as the slope of the secant line between two points with t coordinates equal to the boundaries of the time period for the average velocity.

Instantaneous velocity

Example of a velocity vs. time graph, and the relationship between velocity v on the y-axis, acceleration a (the three green tangent lines represent the values for acceleration at different points along the curve) and displacement s (the yellow area under the curve.)

If we consider $v$ as velocity and $x$ as the displacement (change in position) vector, then we can express the instantaneous velocity of a particle or object, at any particular time $t$ , as the derivative of the position with respect to time:

\boldsymbol{v} = \lim_{{\Delta t}\to 0} \frac{\Delta \boldsymbol{x}}{\Delta t} = \frac{d\boldsymbol{x}}{d\mathit{t}}

From this derivative equation, it can be seen that the area under a velocity vs. time ( $v$ vs. $t$ graph) is the displacement, $x$ . In calculus terms, the integral of the velocity function $v (t)$ is the displacement function $x (t)$ . In the figure, this corresponds to the yellow area under the curve labeled $s$ (this is an alternate notation for displacement).

\boldsymbol{x} = \int \boldsymbol{v} \ d\mathit{t}

Since the derivative of the position with respect to time gives the change in position (in metres) divided by the change in time (in seconds), velocity is measured in metres per second ( $m/s$ ) for the infinitesimally small time interval on the graph. Although the concept of an instantaneous velocity might at first seem counter-intuitive, it is best considered as the velocity that the object would continue to travel at if it stopped accelerating at that moment.

Relationship to acceleration

Although velocity is defined as the rate of change of position, it is often common to start with an expression for an object's acceleration. As seen by the three green tangent lines in the figure, an object's instantaneous acceleration at a point in time is the slope of the line tangent to the curve of a ( $v$ vs. $t$ graph at that point. In other words, acceleration is defined as the derivative of velocity with respect to time:

\boldsymbol{a} = \frac{d\boldsymbol{v}}{d\mathit{t}}

From there, we can obtain an expression for velocity as the area under an acceleration vs. time ( $a$ vs. $t$ ) graph. As above, this is done using the concept of the integral:

\boldsymbol{v} = \int \boldsymbol{a} \ d\mathit{t}

Constant acceleration

In the special case of constant acceleration, velocity can be studied using the suvat equations. By considering a as being equal to some arbitrary constant vector, it is trivial to show that

\boldsymbol{v} = \boldsymbol{u} + \boldsymbol{a}t

with v as the velocity at time t and u as the velocity at time t=0. By combining this equation with the suvat equation x=ut+at²/2, it is possible to relate the displacement and the average velocity by

\boldsymbol{x} = \frac{(\boldsymbol{u} + \boldsymbol{v})}{2}\mathit{t} = \boldsymbol{\bar{v}}\mathit{t}

It is also possible to derive an expression for the velocity independent of time, known as the Torricelli equation, as follows:

v^{2} = \boldsymbol{v}\cdot\boldsymbol{v} = (\boldsymbol{u}+\boldsymbol{a}t)\cdot(\boldsymbol{u}+\boldsymbol{a}t)=u^{2}+2t(\boldsymbol{a}\cdot\boldsymbol{u})+a^{2}t^{2}

(2\boldsymbol{a})\cdot\boldsymbol{x} = (2\boldsymbol{a})\cdot(\boldsymbol{u}t+\frac{1}{2}\boldsymbol{a}t^{2})=2t(\boldsymbol{a}\cdot\boldsymbol{u})+a^{2}t^{2} = v^{2} - u^{2}

\therefore v^{2} = u^{2} + 2(\boldsymbol{a}\cdot\boldsymbol{x})

where v=|v| etc...

The above equations are valid for both Newtonian mechanics and special relativity. Where Newtonian mechanics and special relativity differ is in how different observers would describe the same situation. In particular, in Newtonian mechanics, all observers agree on the value of t and the transformation rules for position create a situation in which all non-accelerating observers would describe the acceleration of an object with the same values. Neither is true for special relativity. In other words only relative velocity can be calculated.

Quantities that are dependent on velocity

The kinetic energy of a moving object is dependent on its velocity by the equation

E_{\text{k}} = \tfrac{1}{2}mv^{2}

where E_k is the kinetic energy and m is the mass. Kinetic energy is a scalar quantity as it depends on the square of the velocity, however a related quantity, momentum, is a vector and defined by

\boldsymbol{p}=m\boldsymbol{v}

In special relativity, the dimensionless Lorentz Factor appears frequently, and is given by

\gamma = \frac{1}{\sqrt{1-\frac{v^{2}}{c^{2}}}}

where γ is the Lorentz factor and c is the speed of light.

Escape velocity is the minimum speed a ballistic object needs to escape from a massive body like the earth. It represents the kinetic energy that, when added to the object's gravitational potential energy, (which is always negative) is greater than or equal to zero. The general formula for the escape velocity of an object at a distance r from the center of a planet with mass M is

v_{\text{e}} = \sqrt{\frac{2GM}{r}},

where G is the Gravitational constant. The escape velocity from Earth's surface is about 11 100 m/s.

Relative velocity

Main article: Relative velocity

Relative velocity is a measurement of velocity between two objects as determined in a single coordinate system. Relative velocity is fundamental in both classical and modern physics, since many systems in physics deal with the relative motion of two or more particles. In Newtonian mechanics, the relative velocity is independent of the chosen inertial reference frame. This is not the case anymore with special relativity in which velocities depend on the choice of reference frame.

If an object A is moving with velocity vector v and an object B with velocity vector w, then the velocity of object A relative to object B is defined as the difference of the two velocity vectors:

\boldsymbol{v}_{A\text{ relative to }B} = \boldsymbol{v} - \boldsymbol{w}

Similarly the relative velocity of object B moving with velocity w, relative to object A moving with velocity v is:

\boldsymbol{v}_{B\text{ relative to }A} = \boldsymbol{w} - \boldsymbol{v}

Usually the inertial frame is chosen in which the latter of the two mentioned objects is in rest.

Scalar velocities

In the one-dimensional case,^[2] the velocities are scalars and the equation is either:

\, v_{rel} = v - (-w)

, if the two objects are moving in opposite directions, or:

\, v_{rel} = v -(+w)

, if the two objects are moving in the same direction.

Polar coordinates

In polar coordinates, a two-dimensional velocity is described by a radial velocity, defined as the component of velocity away from or toward the origin (also known as velocity made good), and an angular velocity, which is the rate of rotation about the origin (with positive quantities representing counter-clockwise rotation and negative quantities representing clockwise rotation, in a right-handed coordinate system).

The radial and angular velocities can be derived from the Cartesian velocity and displacement vectors by decomposing the velocity vector into radial and transverse components. The transverse velocity is the component of velocity along a circle centered at the origin.

\boldsymbol{v}=\boldsymbol{v}_T+\boldsymbol{v}_R

where

\boldsymbol{v}_T

is the transverse velocity

\boldsymbol{v}_R

is the radial velocity.

The magnitude of the radial velocity is the dot product of the velocity vector and the unit vector in the direction of the displacement.

v_R=\frac{\boldsymbol{v} \cdot \boldsymbol{r}}{\left|\boldsymbol{r}\right|}

where

\boldsymbol{r}

is displacement.

The magnitude of the transverse velocity is that of the cross product of the unit vector in the direction of the displacement and the velocity vector. It is also the product of the angular speed $\omega$ and the magnitude of the displacement.

v_T=\frac{|\boldsymbol{r}\times\boldsymbol{v}|}{|\boldsymbol{r}|}=\omega|\boldsymbol{r}|

such that

\omega=\frac{|\boldsymbol{r}\times\boldsymbol{v}|}{|\boldsymbol{r}|^2}.

Angular momentum in scalar form is the mass times the distance to the origin times the transverse velocity, or equivalently, the mass times the distance squared times the angular speed. The sign convention for angular momentum is the same as that for angular velocity.

L=mrv_T=mr^2\omega\,

where

m\,

is mass

r=\|\boldsymbol{r}\|.

The expression $mr^2$ is known as moment of inertia. If forces are in the radial direction only with an inverse square dependence, as in the case of a gravitational orbit, angular momentum is constant, and transverse speed is inversely proportional to the distance, angular speed is inversely proportional to the distance squared, and the rate at which area is swept out is constant. These relations are known as Kepler's laws of planetary motion.

Notes

↑ Wilson, Edwin Bidwell (1901). Vector analysis: a text-book for the use of students of mathematics and physics, founded upon the lectures of J. Willard Gibbs. p. 125. This is the likely origin of the speed/velocity terminology in vector physics.
↑ Basic principle

References

Robert Resnick and Jearl Walker, Fundamentals of Physics, Wiley; 7 Sub edition (June 16, 2004). ISBN 0-471-23231-9.

External links

Wikimedia Commons has media related to Velocity.

Physicsclassroom.com, Speed and Velocity
Introduction to Mechanisms (Carnegie Mellon University)

Kinematics

← Integrate … Differentiate →

Displacement (Distance) Velocity (Speed) Acceleration Jerk Jounce Pop

Classical mechanics derived SI units

Linear/translational quantities			Angular/rotational quantities
time: t s			time: t s
	displacement, position: x m			angular displacement, angle: θ rad
frequency: f s⁻¹, Hz	speed: v, velocity: v m s⁻¹		frequency: f s⁻¹, Hz	angular velocity: ω rads⁻¹
	acceleration: a m s⁻²			angular acceleration: α rad s⁻²
	jerk: j m s⁻³			angular jerk: ζ rad s⁻³

mass: m kg			moment of inertia: I kg m² rad⁻²
	momentum: p, impulse: J kg m s⁻¹, N s			angular momentum: L, angular impulse: ΔL kg m² s⁻¹ rad⁻¹
	force: F, weight: F_g kg m s⁻², N	energy: E, work: W kg m² s⁻², J		torque: τ, moment: M kg m² s⁻² rad⁻¹, N m	energy: E, work: W kg m² s⁻², J
	yank: Y kg m s⁻³, N s⁻¹	power: P kg m² s⁻³, W		rotatum: P kg m² s⁻³ rad⁻¹	power: P kg m²s⁻³, W

Velocity

Constant velocity vs acceleration

Distinction between speed and velocity

Equation of motion

Average velocity

Instantaneous velocity

Relationship to acceleration

Constant acceleration

Quantities that are dependent on velocity

Relative velocity

Scalar velocities

Polar coordinates

See also

Notes

References

External links