Vacuum induction melting

Vacuum induction melting (VIM) utilizes electric currents to melt metal within a vacuum. The first prototype was developed in 1920.^[1] One of the only ways to induce a current within a conductor is through electromagnetic induction. Electromagnetic induction induces eddy currents within conductors by changing the magnetic field. Eddy currents create heating effects to melt the metal.^[2] Vacuum induction melting has been used in both the aerospace and nuclear industries.^[2]

History

E.F. Northrup built the first prototype of a vacuum induction furnace in 1920 in the United States of America. In 1923, German scientist Wilhelm Rohn continued to advance the VIM technology along with founding the Heraeus melting facility. Medium frequency furnaces were seen soon afterwards in England and Sweden in 1927.^[1] The process was initially developed to refine certain special metals such as cobalt and nickel. As these metals and alloys became more common, the process of VIM became more widely used. VIM now helps to melt a variety of metals for aircraft and nuclear applications.^[3]

Procedure

Vacuum induction melting uses currents within a vacuum to melt metal. VIM involves placing a core-less induction furnace into a vacuum chamber.^[4] The heat used to start the melting process comes from an induced current called an eddy current. The melting and casting operations are then carried out at low pressures to control the entire alloy chemistry process.^[4]

Eddy currents

Eddy currents make the vacuum induction melting process possible. These eddy currents are induced currents in a conductor created by a changing magnetic field. The metals begin to melt after heat is created from the eddy currents. The process becomes simplified to a matter of changing the magnetic field within a conductor.

Uses

VIM was usually used for refining high purity metal and alloys. VIM is now becoming more popular due to the variety of uses now available. The commercial production of nickel titanium alloys utilizes VIM to its full extent. Other examples of using VIM include melting steels for nuclear applications, cobalt alloy for medical applications, and both high purity copper alloy and clean magnetic alloy for high permeability.^[3] The process of VIM can even begin electro-slag remelting, which can remelt electrodes.^[2]

Nickel titanium

VIM is the most widely used process for the production of nickel titanium alloys. When producing nickel titanium, the process of VIM sometimes causes carbon contamination which causes some of the titanium ions to form titanium carbide (TiC). These TiC particles change the transformation temperature along with the strength of the alloy. This is one drawback with the process of vacuum induction melting.^[5]

References