United States B-class submarine

For ships with a similar name, see B-class submarine.
USS B-3, underway near the New York Navy Yard, 1909.
Class overview
Builders: Electric Boat (design)
Fore River Shipbuilding, Quincy, Massachusetts
Operators:  United States Navy
Preceded by: Plunger class
Succeeded by: C class
Built: 1906-1907
In commission: 19071921
Completed: 3
Retired: 3
General characteristics
Type:Submarine
Displacement:145 long tons (147 t) surfaced
173 long tons (176 t) submerged
Length:82 ft 6 in (25.15 m)
Beam:12 ft 6 in (3.81 m)
Draft:10 ft 6 in (3.20 m)
Propulsion:1 × Craig Shipbuilding Co. gasoline engine, 250 bhp (190 kW)

1 × Electro Dynamic electric motor, 150 bhp (110 kW)
60-cell battery

1 shaft
Speed:9 knots (17 km/h; 10 mph) surfaced
4 knots (7.4 km/h; 4.6 mph) submerged
Range:540 nautical miles (1,000 km; 620 mi) (surfaced), 12 nautical miles (22 km; 14 mi) (submerged)
Test depth:150 ft (46 m)
Complement:10 officers and enlisted
Armament:2 × 18 inch (457 mm) bow torpedo tubes (4 torpedoes)

The B class submarines were three United States Navy submarines built by the Fore River Shipbuilding Company in Quincy, Massachusetts, under a subcontract from the Electric Boat Company.[1] They were eventually stationed in the Philippines, an American possession, beginning in 1912-15. They were shipped there on colliers (coal-carrying ships). All three were stricken and expended as targets 1919-22.[2]

Design

These vessels introduced some features intended to increase underwater speed, including a small sail and a rotating cap over the torpedo tube muzzles. For extended surface runs, the small sail was augmented with a temporary piping-and-canvas structure (see photo). Apparently the "crash dive" concept had not yet been thought of, as this would take considerable time to deploy and dismantle. This remained standard through the N-class, commissioned 1917-1918. Experience in World War I showed that this was inadequate in the North Atlantic weather, and earlier submarines serving overseas in that war (E-class through L-class) had their bridge structures augmented with a "chariot" shield on the front of the bridge. Starting with the N-class, built with lessons learned from overseas experience, US submarines had bridges more suited to surfaced operations in rough weather. The streamlined, rotating torpedo tube muzzle cap eliminated the drag that muzzle holes would otherwise cause. In the stowed position, the submarine appears to have no torpedo tubes, as the holes in the cap are covered by the bow stem. This feature remained standard through the K-class, after which it was replaced with shutters that were standard through the 1950s.

Ships

References

  1. "Quincy's Shipbuilding Heritage". thomascranelibrary.org. Retrieved 16 July 2010.
  2. Gardiner, p. 127
  3. "Viper / B-1 (SS-10)". navsource.org. Retrieved 16 July 2010.
  4. "Cuttlefish / B-2 (SS-11)". navsource.org. Retrieved 16 July 2010.
  5. "Tarantula / B-3 (SS-12)". navsource.org. Retrieved 16 July 2010.

External links

See Also

Media related to B class submarines of the United States at Wikimedia Commons