Ultrasonic impact treatment

Ultrasonic impact treatment (UIT) is a metallurgical processing technique, similar to work hardening, in which ultrasonic energy is applied to a metal object. Ultrasonic treatment can result in controlled residual compressive stress, grain refinement and grain size reduction. Low and high cycle fatigue are enhanced and have been documented to provide increases up to ten times greater than non-UIT specimens.

Theory

In UIT, ultrasonic waves are produced by an electro-mechanical ultrasonic transducer, and applied to a workpiece. An acoustically tuned resonator bar is caused to vibrate by energizing it with a magnetostrictive ultrasonic transducer. The energy generated from these high frequency impulses is imparted to the treated surface through the contact of specially designed steel pins. These transfer pins are free to move axially between the resonant body and the treated surface.

When the tool, made up of the ultrasonic transducer, pins and other components, comes into contact with the work piece it acoustically couples with the work piece, creating harmonic resonance. This harmonic resonance is performed at a carefully calibrated frequency, to which metals respond very favorably, resulting in compressive residual stress, stress relief and grain structure improvements.

Depending on the desired effects of treatment a combination of different frequencies and displacement amplitude is applied. These frequencies range between 25 and 55 kHz,[1] with the displacement amplitude of the resonant body of between 22 and 50 µm (0.00087 and 0.00197 in).

Application

UIT is highly controllable. Incorporating a programmable logic controller (PLC), the frequency and amplitude of UIT are easily set and maintained, thus removing a significant portion of operator dependency. UIT can also be mechanically controlled, thus providing repeatability of results from one application to the next. Examples of mechanical control employed with UIT include:

With these types of controlled applications, the surface finish of the work piece is highly controllable.

For many applications, UIT is most effectively employed by hand. The high portability of the UIT system enables travel to austere locations and hard to reach places. The flexibility that is facilitated by variations in the tool configuration ensures that access to very tight locations is possible.

UIT's effectiveness has been illustrated on the following metals, among others:

History

UIT was originally developed in 1972 and has since been perfected by a team of Russian scientists under the leadership of Dr. Efim Statnikov. Originally developed and utilized to enhance the fatigue and corrosion attributes of ship and submarine structures, UIT has been utilized in aerospace, mining, offshore drilling, shipbuilding, infrastructure, automotive, energy production and other industries.[2]

Practical applications

UIT enables life extension of steel bridges.[3] This technique has been employed in numerous US states as well as other nations. The result is a greatly reduced cost of infrastructure. UIT has been certified for this use by AASHTO.

The use of UIT on draglines and other heavy equipment in the mining industry has resulted in increased production and has decreased downtime and maintenance costs.

UIT is employed on drive shafts and crank shafts in a number of industries. Results show that UIT increases shaft life by over a factor of 3.[3]

The US Navy uses UIT to address cracked areas in certain aluminum decks. Without UIT, crack repairs resulted in almost immediate re-cracking. With UIT, repairs have shown to last over eight months without cracks.

See also

References

  1. ↑ "Tools of the Trade". Appliedultrasonics.com. Retrieved 2012-02-24.
  2. ↑ "Ultrasonic Peening | Enhance Metal Performance". Applied Ultrasonics. Retrieved 2012-02-24.
  3. ↑ 3.0 3.1 "Ultrasonic Peening | Enhance Metal Performance". Applied Ultrasonics. Retrieved 2012-02-24.

Further reading

IIW PUBLICATIONS:

External links