Trado
The Trado, named after the co-founder of DAF Hubertus van Doorne and captain engineer Piet van der Trappen (Trappen — Doorne), consisted of a leaf-springed bogie with two actuated road wheels that could be easily attached to, driven by and rotate on the back axis of any commercial truck, thus adding a "walking beam" to the vehicle that significantly improved its cross-country performance. The Trado III suspension system, an improved version, was a considerable commercial success and applied to many existing and new civilian and military truck types. The armoured vehicle projects had the designation Pantrado in common, a contraction of the Dutch word for "armoured car", Pantserwagen, and Trado.
The Trado III suspension could be fitted with a track on the lines of the Kégresse track, changing a vehicle into a half-track. The first project, the Pantrado 1, envisaged a very long type with a good trench-crossing capability, brought about by applying the principle of the articulated vehicle: it was to consist of two fully tracked truck hulls attached back to back, connected by a large horizontal articulated cylinder. The full track was to be achieved by extending the track over the rubber-tired front wheels. The cylinder could be split, creating two tanks, each with the engine in front and the fighting room, crowned by a gun turret, at the back. The second project, the Pantrado 2, was in the form of a single half-track; the third, the Pantrado 3, dispensed with the track option entirely and was a pure armoured car. In view of the intended reconnaissance rôle of the vehicles to be procured, the army was only interested in the third type. In the autumn of 1937, it ordered a single prototype to be built; Van Doorne and Van der Trappen had indicated this could be finished quickly as they had already prepared the manufacture of a demonstrator vehicle. The claim to superiority to British design was based on the use of a welded monocoque construction combined with a consistent use of the sloped armour principle, which was predicted to lead to a much improved weight-efficiency. The type would thus not utilise an existing truck chassis, as was common for contemporary armoured cars.