Tracing paper

A roll of yellow tracing paper.
Simulation of tracing paper transparency levels
Samples of tracing paper
Tracing paper roll

Tracing paper is paper made to have low opacity, allowing light to pass through. It was originally developed for architects and design engineers to create drawings which could be copied precisely using the diazo copy process, it then found many other uses. The original use for drawing and tracing was largely superseded by technologies which do not require diazo copying or manual copying (by tracing) of drawings.

The transparency of the paper is achieved by careful selection of the raw materials and the process used to create transparency. Cellulose fibre forms the basis of the paper, usually from wood species but also from cotton fibre. Often, paper contains other filler materials to enhance opacity and print quality. For tracing or translucent paper it is necessary to remove any material which obstructs the transmission of light.[1]

Production

There are three main processes to manufacture this type of paper, as follows:-

  1. Through mechanical ‘refining’ of the cellulose fibre to create a fibre which is highly fibrillated and gelatinous, so that in forming the sheet of paper, virtually all air is excluded from the internal structure of the paper. This method produces a very translucent and even looking paper over a range of grammages from 42 to over 280 gsm.
  2. By making a ‘normal’ sheet of paper and then filling the spaces between the fibres with a material that has the same refractive index as the cellulose. This was a common process adopted in the USA. The product was frequently called Vellum, although this terminology can refer to a wider range of special papers. Due to the relatively high cost, this method of manufacture has largely disappeared.
  3. As with 2, by making a normal sheet of paper, which is followed by immersing uncut and unloaded paper of good quality in sulfuric acid for a few seconds. The acid converts some of the cellulose into amyloid form having a gelatinous and impermeable character. When the treated paper is thoroughly washed and dried, the resultant product is much stronger than the original paper. Tracing paper is resistant to oil, grease and to a large extent impervious to water and gas.

Tracing paper is named as such for its ability for an image to be traced onto it. When tracing paper is placed onto a picture, the picture is easily viewable through the tracing paper. Thus, it becomes easy to find edges in the picture and trace the image onto the tracing paper. Pure cellulose fiber is translucent, and it is the air trapped between fibers, that makes paper opaque and looks white.[1] If the fibers are refined and beaten until all the air is taken out, then the resulting sheet will be translucent. Translucent papers are dense and contain up to 10% moisture at 50% humidity. This type of paper is roughly 25% lighter than regular paper.

The sizing in production will determine whether it is for laser printer or inkjet/offset printing.

Tracing paper may be uncoated or coated. Natural tracing paper for laser printing is usually uncoated.

The HS code for tracing paper is 4806.30.[2]

Tracing paper is usually made from sulfite pulp by reducing the fibres to a state of fine subdivision and hydrolysing them by very prolonged beating in water.

tracing paper can be recycled nad also can be made from up to 30% recycled fibre.[3]

Technical specifications

The follows are common standards for tracing paper Though, generally it is manufactured in grammages over 60 GSM:

Substance Density Humidity Roughness Translucent Tensile
strength (mD) 		Surface
alkali pH
ISO 536[4]
(g/m²) 		(kg/m³) ISO 287[5]
(%) 		ISO 8791-2[6]
(ml/min) 		ISO 2469[7]
(%) 		ISO 1974[8]
(mN) 		ISO 6588[9][9][10]
(pH)
42 1,200÷1,235 7 100-300 79+/-5 220-440 6-7
53 1,200÷1,235 7 100-300 77+/-5 220-440 6-7
63 1,220÷1,250 7 100-300 75+/-5 220-440 6-7
73 1,220÷1,250 7.5 100-300 75+/-5 220-440 6-7
83 1,220÷1,250 7.5 100-300 75+/-5 220-440 6-7
93 1,220÷1,250 7.5 100-300 75+/-5 220-440 6-7
100 1,220÷1,250 7.5 100-300 75+/-5 220-440 6-7
112 1,220÷1,250 8 100-300 73+/-5 220-440 6-7
130 1,220÷1,250 8 100-300 69+/-5 220-440 6-7
150 1,220÷1,250 8 100-300 65+/-5 220-440 6-7
160 1,220÷1,250 8 100-300 61+/-5 220-440 6-7
170 1,220÷1,250 8 100-300 59+/-5 220-440 6-7
190 1,220÷1,250 8 100-300 55+/-5 220-440 6-7
200 1,220÷1,250 8 100-300 53+/-5 220-440 6-7
240 1,220÷1,250 8 100-300 47+/-5 220-440 6-7
280 1,220÷1,250 8 100-300 45+/-5 220-440 6-7

Application

Printing notices

Usages

See also

References

  1. ↑ 1.0 1.1 How is paper made translucent (grease proof, tracing paper)? PaperOnWeb
  2. ↑ Paper and paperboard; articles of paper pulp, of paper or of paperboard
  3. ↑ Frequently Asked Questions Arjo Wiggins
  4. ↑ ISO 536:2012 Paper and board -- Determination of grammage
  5. ↑ ISO 287:2009 Paper and board -- Determination of moisture content of a lot -- Oven-drying method
  6. ↑ ISO 8791-2:2013 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method
  7. ↑ ISO 2469:2014 Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
  8. ↑ ISO 1974:2012 Paper -- Determination of tearing resistance -- Elmendorf method
  9. ↑ 9.0 9.1 ISO 6588-1:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction
  10. ↑ ISO 6588-2:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction
  11. ↑ Notes when printing

External links

Wikimedia Commons has media related to Tracing paper.

List of tracing paper mill