Telephone numbers in Australia

Australia telephone numbers

Location of Australia (dark green)
Location
Country Australia
Continent Oceania
Regulator Australian Communications and Media Authority
Type Open
NSN length 9
Typical format (0x) xxxx xxxx
Access codes
Country calling code +61
International call prefix 0011
Trunk prefix 0

The Australian telephone numbering plan describes the allocation of phone numbers in Australia. It has changed many times, the most recent major reorganisation by the Australian Communications Authority taking place between 1994 and 1998.[1]

Overview

For land-line telephony, Australia has been geographically divided into four large areas, most of which cover more than one State and/or Territory. All "Local" telephone numbers within these four areas are of eight digits, consisting of a four digit "Exchange" code plus a four digit number. The "National 'Significant' Number" consists of a single digit "Area" code followed by the "Local" eight digit number - a total of nine digits. To access the "National 'Significant' Number" of a land-line telephone from a different "Area" (or from a "Mobile" 'phone) within Australia it is necessary to dial the Australian "Trunk Access Code" of 0, plus the "Area" code, followed by the "Local" Number. Thus, the "Full National Number" (FNN) has ten digits.

The Australian "Trunk Access Code" (0) and the following digit(s) specify the type of service required. The following list is a high level of the numbering plan presented in domestic format. (Geographical region boundaries do not exactly follow State borders.)

When dialing from outside Australia it is necessary to dial the Country Code for Australia (61) followed by the nine digit "National 'Significant' Number" (the + symbol is used to represent International Access Code, e.g. +61 3 xxxx xxxx for a number in Victoria/Tasmania or +61 4xx xxx xxx for a mobile number). Some numbers beginning with a 1 may be dialled without any replacement, after dialling the required International Access Code and the Country Code for Australia (+61). (see below)

Australian "Local Area" numbers are of eight digits in length, conventionally written in the form xxxx xxxx. "Mobile" (Cell Phone) numbers are also of eight digits in length but must also include the Trunk Access Code 0 (when dialled in Australia) plus 4, which indicates that it is the Service required is to a "Mobile" number. Mobile numbers are conventionally written 04xx xxx xxx. (The first four digits 04xx are allocated among the various Mobile Service Providers.) If the number is written where it may be viewed by an international audience (e.g. on an email signature or website) then the number is often written as +61 x xxxx xxxx or +61 4xx xxx xxx respectively.

(The Australian National "Trunk Access Code" of 0 is not used for calls originated from overseas locations.)

Geographic numbers

Fixed line telephone numbers in Australia exist within four "Areas", each specified by a single digit "Area Code". In major centres, the first four digits specify the CCA (Call Collection Area, also known as an Exchange), and the remaining digits specify a number at that Exchange, up to 10,000 of which may be connected. Smaller Exchanges in more remote areas may be specified by five or six "local" digits, meaning that no more than 1,000 or 100 numbers respectively could be connected to such Exchanges.

To access numbers in the same "Area", it is necessary to dial only the eight digits concerned. To access a number in another "Area" it is necessary to dial the "Trunk Access Code" (0), followed by the "Area Code" (2, 3, 7 or 8) plus the "Local" number concerned.

The "Area" codes do not exactly match State/Territory boundaries. Notable are the part of New South Wales around Broken Hill (a large part of the state's area but less than 1% of its population), which uses (08) 80xx numbers, and Wodonga, which is in Victoria but is within the New South Wales (02) area code. Physical exchanges can be allocated one or more prefixes and modern technology allows sub-sets of these number ranges to be allocated to switching entities physically located at a distance from the "exchange" in which their controlling computer is located. (Thus, the concept of what is a "telephone exchange" can become somewhat blurred.)

Land-lines use an open dialing plan: if the caller's phone shares the same area code as the called phone, the area code may be omitted. For example a call from the number (02) 5551 5678, to the number (02) 7010 1111, will be connected if the caller dials only 7010 1111. Similarly, a person who dials 7010 5678 on a land-line or mobile phone in Melbourne (i.e., within the 03 area) will be connected to 03 7010 5678. For this reason, land-line numbers are often specified without the area code. If a person's number and the destination number share the same Area code, then the Area code is not required, even if it is not a "local" (untimed) call.

However, the "Full National Number" may always be dialled. In fact, the full "International Number" may be dialled, since the telephone network has the "intelligence" to recognize when the destination required is either "International", in a different "National" Area or within the "Local" area – and to switch and charge the call accordingly. Thus, telephone numbers may be stored in mobile phones in the form of the full international number, should the owner of the phone be likely to use the phone concerned in an area away from "home", within Australia or overseas.

Mobile phones

Within Australia, Mobile phone numbers begin with 04 (The Australian National "Trunk Access Code" of 0 plus the Mobile indicator of 4), followed by eight digits. e.g. 04yy yxx xxx. {When calling from outside Australia, the number called would be represented as +61 4yy yxx xxx)

The y-digit codes are allocated per network, although with the introduction of number portability, there is no longer a fixed relationship between the mobile phone number and the network it uses. New numbers are still allocated to phone companies in blocks, so a new number will generally still be on its "home" network.

Within Australia, mobile numbers must always be dialled with all 10 digits, no matter from where they are initiated. 04 is the National Trunk Access Code plus a prefix indicating the service required and not an "Area code", as such.

Geographic numbers

Geographical areas are identified by the first few digits of the local number:

Central East region (02)

South-east region (03)

North-east region (07)

Central and West region (08)

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 1.25 1.26 Prefixes proposed by ACMA and legislated in early 2008.[2] Note, some of these numbers are now actually in use
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 New in 2012
  3. ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 3.36 3.37 Added since renumbering
  4. ↑ 4.0 4.1 4.2 4.3 4.4 4.5 0x 5550 and 0x 7010 reserved for fictitious use.[3]

Number prefixes used in state capital cities

Sydney

Melbourne

Brisbane

Adelaide

Perth

Non-geographic numbers

Mobile phone numbers (04, 05)

Each mobile phone company is allocated numbers in blocks, which are listed below. However mobile number portability means an individual number might have been "ported". There are also many MVNOs which use numbers from their wholesaler or might have their own ranges. A search function is also available on the ACMA website.

ACMA plans to introduce the "05" range for mobile numbers in 2017, when the "04" range is expected to be exhausted.[4]

Allocation for numbers in the range 04xy z00 000 – 04xy z99 999
y 0 1 2 3 4 5 6 7 8 9
z 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
040yz Telstra Optus Vodafone Telstra
041yz Vodafone Optus Vodafone Telstra
042yz * Vodafone Optus Vodafone Telstra
043yz Vodafone Optus Vodafone Optus Spare Telstra
044yz Spare T Spare Telstra Vodafone
045yz Vodafone Spare Telstra
046yz Spare Optus Telstra Optus Lycamobile
047yz Lycamobile Spare Telstra Optus
048yz Spare Optus Spare Telstra Spare Telstra * T * *
049yz Telstra Spare Telstra
*Allocation of numbers in these ranges
Multi Range Provider
04200 0420 000 000 – 0420 019 999 Rail Corporation New South Wales
0420 020 000 – 0420 029 999 Dialogue Communications Pty Limited
0420 030 000 – 0420 039 999 Symbio Network Pty Ltd
0420 040 000 – 0420 099 999 Spare
04201 0420 100 000 – 0420 109 999 Pivotel Satellite Pty Limited
0420 110 000 – 0420 119 999 COMPATEL Limited
0420 120 000 – 0420 199 999 Spare
04888 0488 800 000 – 0488 899 999 My Number Pty Ltd
04898 0489 800 000 – 0489 839 999 Spare
0489 840 000 – 0489 849 999 Victorian Rail Track
0489 850 000 – 0489 899 999 Spare
04890 0489 000 000 – 0489 909 999 Novatel Telephony Pty Ltd

Satellite phone numbers (014)

Numbers beginning with 014 are predominantly used for satellite services. Parts of the 014 prefix had been used as a 9 digit, AMPS mobile phone access code. While these parts are still "reserved" for analogue mobile phone services there are none allocated for this purpose.

The 01471 prefix is the 10 digit replacement for the previous, 9 digit ITERRA satellite phone code 0071 xxxxx. Prior to its use for ITERRA (and other satellite services). These numbers were allocated in March 1999.

0145xxxxxx numbers are used for services utilised on the Optus network in Australia. This is predominantly used for MobileSat and Thuraya mobile satellite services. These numbers were allocated in December 1992: 220,000 with the rest "spare".

The prefixes 0141, 0142, 0143, 0145 and 0147 are set aside for satellite systems – presumably the entire 014 prefix will eventually be made available. However, there is not a lot of demand for these services, and many satellite phones now have normal mobile phone numbers (prefix 04).

Location independent communications service (0550)

These numbers are designed for VoIP (Voice over Internet Protocol) systems, where they are work like a fixed number but not allocated on a geographical level. It is possible that LICS numbers will be absorbed into mobile numbers in the future, as they provide similar features. Indeed, the July 2012 variation of the numbering plan allocated the rest of the 05 range to digital mobile numbering.[5]

Data numbers (0198)

All calls to 0198 numbers are a "local call" cost like 13 and 1300 numbers but are used for internet service provider access numbers. They are used both with dial up modems and ISDN. e.g. 0198 379 000 is the Dial-Up PoP number for iiNet

Obsolete numbers (014, 015, 016, 017, 018, 019)

Some numbers are still in the plan that are no longer used.

The 016 prefix is used for pagers. As of March 2011 only 1000 numbers were allocated, and by the end of 2012 there were none allocated.

The 015 and 018 prefixes (along with parts of 014, 017 and 019) were used for Analogue (AMPS) mobile phones. As of March 2011 only 3 numbers are allocated. These numbers were migrated into the 04 range in the late 1990s and early 2000s.

Non-geographic numbers (domestic use)

The following codes are not generally dialable from international points, but used in domestic dialling:

Some notes:

The current numbering plan would appear to be sufficient to cope with potential increase in demand for services for quite some time to come. The 06 and 09 area codes are completely unused, plus each current area code has large spaces unallocated.

Emergency services numbers (000, 106, 112)

000 is the primary emergency telephone number in Australia. Secondary emergency numbers are 106 (for use by the hearing impaired with a TTY terminal) and the international GSM mobile emergency telephone number 112.

Increased awareness of the 112 emergency number in Australia has led to the potential for confusion over which number to call in an emergency. As a secondary emergency number, 112 is not guaranteed to work from all technologies; most notably, it does not work from land lines.[7] In order to encourage use of 000, mobile telephones imported commercially into Australia are required to be programmed to treat 000 in the same fashion as 112 (i.e. dialling with key lock enabled, use of any carrier, preferential routing, etc.).[8] On older or privately imported (e.g. roaming from another country) telephones, 000 may not receive such preferential treatment.

A proposed amendment to the Telecommunications (Consumer Protection and Service Standards) Act 1999 would prevent carriers from providing emergency services access to SIM-less devices, i.e. mobile telephones that do not have a SIM installed.[9]

Local Rate and FreeCall numbers (13, 180)

Australia uses the free call prefix 1800 for 10 digit freecall numbers. This is copied from the North American or NANPA prefix 1–800, but while in North America, the 1 is the long-distance or toll prefix and 800 is the area code; 1800 in Australia is itself a "virtual area code" (prior to the introduction of 8-digit numbers, the free call code was 008). There are also seven digit freecall numbers beginning with 180 – the only numbers currently allocated begin with 1802.

The 13 and 1300 numbers are known as Local Rate Numbers or SmartNumbers.[10] They are also known as priority 13, and priority 1300 numbers. These work across large areas (potentially the whole of Australia) and only charge the caller a low cost, routing the call to the appropriate place in a given area. For example, a company could have the number 139999 and have the telephone company set it up so that calls made in Melbourne would route to their Melbourne number, calls made in Brisbane to their Brisbane number, and calls made anywhere else in Australia route to their Sydney number, all at a local charge cost to the caller. 13 numbers were not available before the introduction of the new numbering plan. Businesses looking for local callers tend to connect a "1300". Note that these numbers are called "Local Rate" and not "Local" numbers, so do not necessarily cost the same as a local call: Indeed many (landline and mobile) phone plans do not even include them in the "included" credit and/or charge them at a higher rate than "normal" numbers.

1800, 1300 and 13 numbers are reverse charge networks. There is no real difference between a 13 number and a 1300 number other than the length of the number, though the shorter number has a higher fee for the owner of the number. The difference between a 13 number and an 1800 number is that a 13 number attracts a local call connect fee (around 25c) when dialled from a landline. A call to an 1800 is free when dialled from a landline. Note that higher fees usually apply when either type of number is dialled from a mobile phone. These numbers "forward" to a geographic or mobile number. When a 13 number is called by a user in the same local call area there is usually no cost to the recipient for the first 20 minutes. The recipient is usually charged at a set rate per second for each call, depending on plan and destination.

Premium numbers (19)

190x (not to be confused with 0198) is the prefix for premium rate services (e.g. recorded information, competition lines, psychics, phone sex, etc.). (Prior to the introduction of 8-digit numbers, the area code was 0055.) 190 numbers incur a rate as charged by the provider – either at a per-minute rate (limited at $5.50 per minute) or a fixed rate (up to $38.50 per call). The latter method is most often used for fax-back services, where a timed charge is not appropriate. Costs of 190 calls for competitions involving chance are also often limited by state legislation to $0.55 per call. (In the previous numbering plan, 0055 numbers were limited to three bands: Premium Rate, Value Rate and Budget Rate, with per minute rates of $0.75, $0.60 and $0.40 respectively.)

Other numbers beginning with 19 are used for premium-rate SMS services. These were originally trialled using the 188 prefix. These can range from a standard SMS cost (usually 25c), up to 55c for competition use, to several dollars for other uses, such as unique bid auctions.

International access

Default (0011)

The main international prefix is 0011. (For mobile phones, the plus symbol "+" can be used instead of the prefix.[11])

Others

There are other codes for using a non-default carrier or a special plan:

However, carrier selection codes (14xx) are now also used, and carrier pre-selection is widely used.

Override prefixes

Provider override codes (14)

These four-digit numbers are dialled before the destination number to complete and bill a call by a carrier other than the subscriber's service provider. For example, to use AAPT to call a number in Tokyo, Japan, subscribers would dial 1414 0011 81 3 xxxx xxxx, or to use Optus to call a Perth they would dial 1456 08 xxxx xxxx.

Supplementary Control service (183) works from both landline and mobile

Caller identification control - mobile only

Unlike the feature codes below, these caller-id prefixes work with all/most carriers.

Other numbers and codes

Feature codes – Telstra

These codes are only true for Telstra-infrastructure based landline phones

Test numbers

Historic numbering plans

0055 numbers were previously premium-rate numbers, but have been moved into 190 numbers before 1999. They are still referenced by many Australians.

Directory assistance was split into various numbers: 013 for local calls, 0175 for other national calls, and 0103 for international. The two domestic numbers have been replaced with 1223, while 0103 has been replaced with 1225. Other numbers for directory assistance, often with a call connection option, exist depending on the carrier.

014 was originally the number for the time, (later 1104), which was changed to 1194 in 1976.

0176 was previously the reverse-charge call operator, which has been moved to 12550 or 3rd-party companies such as 1800 REVERSE.

Until the early 1960s, the first one or two digits of telephone numbers in metropolitan areas were alphabetical, with each letter representing a distinct number on the telephone dial. Each one-letter or two-letter code signified an exchange within an urban area. Rural and regional areas typically relied on manual exchanges, or only one automatic exchange for the whole town, so rural and regional numbers did not feature these letter prefixes.

This alphanumeric scheme was significantly different from the current system used for SMS messages.

The former alphanumeric scheme was:

The letters did not relate to the exchange name. Although Melbourne city numbers began with 6, it was only rarely, and probably by accident, that any other exchanges had matching letters.

The old call back number was 199, and could be used on public pay phones, and private numbers too. This has been moved to a new number 12722199.

See also

References

External links