Tektite

Two splash-form tektites

Tektites (from Greek τηκτός "tēktos", molten) are gravel-size bodies composed of black, green, brown or gray natural glass formed from terrestrial debris ejected during extraterrestrial impacts. They are characterized by 1. a fairly homogeneous composition; 2. an extremely low content of water and other volatiles; 3. an abundance of lechatelierite; 4. a general lack of microscopic crystals known as microlites and chemical relation to the local bedrock or local sediments; and 5. their distribution within geographically extensive strewnfields. Tektites generally range in size from centimeters to millimeters. Millimeters-size tektites are known as microtektites.^[1][2][3]

Characteristics

Although tektites are superficially similar to some terrestrial volcanic glasses (obsidians), they have unusual distinctive physical characteristics that distinguish them from such glasses. First, they are completely glassy and lack any microlites or phenocrysts, unlike terrestrial volcanic glasses. Second, although high in silica (>65 wt%), the bulk chemical and isotopic composition of tektites is closer to those of shales and similar sedimentary rocks and quite different from the bulk chemical and isotopic composition of terrestrial volcanic glasses. Third, tektites contain virtually no water (<0.02 wt%), unlike terrestrial volcanic glasses. Fourth, the flow-banding within tektites often contains particles and bands of lechatelierite, which are not found in terrestrial volcanic glasses. Finally, a few tektites contain partly melted inclusions of shocked and unshocked mineral grains, i.e. quartz, apatite, and zircon, as well as coesite.^[1][2][3]

The difference in water content can be used to distinguish tektites from terrestrial volcanic glasses. When heated to their melting point, terrestrial volcanic glasses will turn into a foamy glass because of their content of water and other volatiles. Unlike terrestrial volcanic glass, a tektite will produce only a few bubbles at most when heated to its melting point, because of its much lower water and other volatiles content.^[4]

Classification

On the basis of morphology and physical characteristics, tektites have traditionally been divided into four groups. The tektites which have been found on land have traditionally been subdivided into three groups: (1) splash-form (normal) tektites, (2) aerodynamically shaped tektites, and (3) Muong Nong-type (layered) tektites. Splash-form and aerodynamically shaped tektites are only differentiated on the basis of their appearance and some of their physical characteristics. Splash-form tektites are centimeter-sized tektites that are shaped like spheres, ellipsoids, teardrops, dumbbells, and other forms characteristic of isolated molten bodies. They are regarded as having formed from the solidification of rotating liquids, and not atmospheric ablation. Aerodynamically shaped tektites, which are mainly part of the Australasian strewn field, are splash-form tektites (buttons) which display a secondary ring or flange. The secondary ring or flange is argued as having been produced during the high-speed reentry and ablation of a solidified splash-form tektite into the atmosphere. Muong Nong tektites are typically larger, greater than 10 cm in size and 24 kg in weight, irregular, and layered tektites. They have a chunky, blocky appearance, exhibit a layered structure with abundant vesicles, and contain mineral inclusions, such as zircon, baddeleyite, chromite, rutile, corundum, cristobalite and coesite.^[1][2][3][4]

Microtektites, the fourth group of tektites, are tektites that are less than 1 mm in size. They exhibit a variety of shapes ranging from spherical to dumbbell, disc, oval, and teardrop. The color of microtektites ranges from colorless and transparent to yellowish and pale brown. They frequently contain bubbles and lechatelierite inclusions. Microtektites are typically found in deep-sea sediments that are of the same ages as those of the four known strewn fields.^[2][3] Microtektites of the Australasian strewn field have also been found on land within Chinese loess deposits, and in sediment-filled joints and decimeter-sized weathering pits developed within glacially eroded granite outcrops of the Victoria Land Transantarctic Mountains, Antarctica.^[5][6]

A very rare aerodynamically shaped Australite - Shallow Bowl

Occurrence

The majority of known tektites occur only within four geographically extensive strewn fields. These strewn fields are the Australasian, Central European, Ivory Coast, and North American strewn fields. As summarized by Koeberl,^[7] the tektites within each strewn field are related to each other with respect to their petrological, physical, and chemical properties as well as their age. In addition, three of the four strewn fields have been clearly linked with impact craters on the basis of petrological and chemical properties as well as their age.^[1][2][3]

Recognized types of tektites, grouped according to their known strewnfields, their associated craters, and ages are:

• 1. Australasian strewnfield (no associated crater identified, age: 0.77-0.78 million years):
  • Australites (Australia, dark, mostly black);
  • Indochinites (South East Asia, dark, mostly black);
  • Rizalite (Philippines, black).

• 2. Central European strewnfield (Nördlinger Ries impact crater, Germany, age: 15 million years):
  • Moldavites (Czech Republic, green).

• 3. Ivory Coast strewnfield (Lake Bosumtwi impact crater, Ghana, age: 1 million years):
  • Ivorites (Ivory Coast, black).

• 4. North American paras (Chesapeake Bay impact crater, USA, age: 34 million years):
  • Bediasites (USA, Texas, Black - Dark Brown, some with metallic finish);
  • Georgiaites (USA, Georgia, green).^[1][2][7]

Povenmire and others have proposed the existence of an additional tektite strewn field, the Central American strewn field. Evidence for this reported tektite strewn field consists of tektites recovered from western Belize in the area of the villages of Bullet Tree Falls, Santa Familia and Billy White. This area lies about 55 km east-southeast of Tikal where 13 tektites, two of which were dated as being 820,000 years old, of unknown origin were found. A limited amount of evidence is interpreted as indicating that the proposed Central American strewn field likely covers Belize, Honduras, Guatemala, Nicaragua and possibly parts of southern Mexico. It is speculated that the hypothesized Pantasma Impact Crater in northern Nicaragua might be the source of these tektites.^[8][9][10]

Age

The ages of tektites from the four strewnfields have been determined using radiometric dating methods. The age of moldavites, a type of tektite found in Czech Republic, was determined to be 14 million years, which agrees well with the age determined for the Nördlinger Ries crater (a few hundred kilometers away in Germany) by radiometric dating of Suevite (an impact breccia found at the crater). Similar agreements exist between tektites from the North American strewnfield and the Chesapeake Bay impact crater and between tektites from the Ivory Coast strewnfield and the Lake Bosumtwi-Crater. Ages of tektites have usually been determined by either the K-Ar method, fission-track dating, the Ar-Ar technique, or combination of these techniques.^[1][2][3]

Origins

Terrestrial source theory

A simple, spherical splash-form Indochinite tektite

The overwhelming consensus of Earth and planetary scientists is that tektites consist of terrestrial debris that was ejected during the formation of an impact crater. During the extreme conditions created by an extraterrestrial, hypervelocity impact, near-surface terrestrial sediments and rocks were either melted, vaporized, or some combination of these and ejected from an impact crater. After ejection from the impact crater, the material formed millimeter- to centimeter-sized bodies of molten material, which as they re-entered the atmosphere, rapidly cooled to form tektites that fell to Earth to create a layer of distal ejecta hundreds or thousands of kilometers away from the impact site.^{[1][2][3][11][12][13]}

A moldavite tektite

The terrestrial source for tektites is supported by well-documented evidence. The chemical and isotopic composition of tektites indicates that they are derived from the melting of silica-rich crustal and sedimentary rocks, which are not found on the Moon. In addition, some tektites contain relict mineral inclusions (quartz, zircon, rutile, chromite, and monazite) that are characteristic of terrestrial sediments and crustal and sedimentary source rocks. Also, three of the four tektite strewnfields have been linked by their age and chemical and isotopic composition to known impact craters. A number of different geochemical studies of tektites from the Australasian strewnfield concluded that these tektites consist of melted Jurassic sediments or sedimentary rocks that were weathered and deposited about 167 Ma ago. Their geochemistry suggests that the source of Australasian tektites is a single sedimentary formation with a narrow range of stratigraphic ages close to 170 Ma more or less. This effectively refutes multiple impact hypotheses.^{[1][2][3][12][13]}

Although it is widely accepted that the formation of and widespread distribution of tektites requires the intense (superheated) melting of near-surface sediments and rocks at the impact site and the following high-velocity ejection of this material from the impact crater, the exact processes involved remain poorly understood. One possible mechanism for the formation of tektites is by the jetting of highly shocked and superheated melt during the initial contact/compression stage of impact crater formation. Alternatively, various mechanisms involving the dispersal of shock-melted material by an expanding vapor plume, which is created by a hypervelocity impact, have been used to explain the formation of tektites. Any mechanism by which tektites are created must explain chemical data that suggest that parent material from which tektites were created came from near-surface rocks and sediments at an extraterrestrial impact site. In addition, the scarcity of known strewn fields relative to the number of identified Impact craters indicate that very special and rarely met circumstances are required in order for tektites to be created by an extraterrestrial impact.^{[1][2][12][13]}

Nonterrestrial source theories

Aerodynamically shaped Australite; the button shape caused by ablation of molten glass in the atmosphere.

Though the meteorite impact theory of tektite formation is widely accepted, there has been considerable controversy about their origin in the past. In contrast to a terrestrial impact source for tektites, it was argued that tektites consist of material that was ejected from the Moon by major hydrogen-driven lunar volcanic eruptions and then drifted through space to later fall to Earth as tektites. The major proponents of the lunar origin of tektites include NASA scientist John A. O'Keefe, NASA aerodynamicist Dean R. Chapman, meteorite and tektite collector Darryl Futrell, and long-time tektite researcher Hal Povenmire.^[14] From the 1950s to the 1990s, John A. O'Keefe argued for the lunar origin of tektites based upon their chemical, i.e. rare-earth, isotopic, and bulk, composition and physical properties.^[4][14] Dean R. Chapman used complex orbital computer models and extensive wind tunnel tests to argue that the so-called Australasian tektites originated from the Rosse ejecta ray of the large crater Tycho on the Moon's nearside.^[15] John A. O'Keefe, long-time tektite researcher Hal Povenmire, and meteorite and tektite collector Darryl Futrell claimed on the basis of behavior of glass melts that the homogenization, which is called "fining," of silica melts that characterize tektites could not be explained by the terrestrial-impact theory. They also argued that the terrestrial-impact theory could not explain the vesicules and extremely low water and other volatile content of tektites.^[4][14] Darryl Futrell also reported the presence of microscopic internal features within tektites, which argued for a volcanic origin.^[16][17]

At one time, theories advocating the lunar origin of tektites enjoyed considerable support as part of a spirited controversy about the origin of tektites that occurred during the 1960s. Starting with the publication of research concerning lunar samples returned from the Moon, the consensus of Earth and planetary scientists shifted in favor of theories advocating a terrestrial impact versus lunar volcanic origin. For example, one problem with the lunar origin theory is that the arguments for it are based upon the behavior of glass melts uses data from pressures and temperatures that are vastly uncharacteristic of and unrelated to the extreme conditions of hypervelocity impacts.^[18][19] In addition, various studies have shown that hypervelocity impacts are likely quite capable of producing low volatile melts with extremely low water content.^[7] The consensus of Earth and planetary scientists regards the chemical, i.e. rare-earth, isotopic, and bulk composition evidence as decisively demonstrating that tektites are derived from terrestrial crustal rock, i.e. sedimentary rocks, that are unlike any known lunar crust.^[2][7][20]

In 1960, another non-terrestrial hypothesis for the origin of tektites was proposed by the Russian-born mathematician Matest M. Agrest, who suggested that tektites were formed as a result of nuclear blasts produced by the exploration of extraterrestrials. He used this as an argument to support his paleocontact hypothesis.^[21]

See also

• Impact event
• Impact crater
• Darwin glass
• Fulgurite
• Edeowie glass
• Libyan desert glass

References

Literature

Books

• Barnes, V., and M. Barnes (1973) Tektites. Dowden, Hutchinson, & Ross, Inc., New York, New York. 444 pp. ISBN 0-87933-027-9
• Bouska, Vladimir (1994). Moldavites: The Czech Tektites. Stylizace, Prague, Czechoslovakia. 69 pp.
• Heinen, Guy (1998) Tektites – Witnesses Of Cosmic Catastrophes. Guy Heinen, Luxembourg. 222 pp.
• McCall, G.J.H. (2001) Tektites in the Geological Record. The Geological Society London, London, United Kingdom. 256 pp. ISBN 1-86239-085-1
• McNamara, K., and A. Bevan (1991) Tektites, 2nd ed. Western Australian Museum, Perth, Western Australia, Australia. 28 pp.
• O'Keefe, J. A. (1976) Tektites And Their Origin. Elsevier Scientific Publishing Company, Amsterdam, Netherlands. 266 pp. ISBN 0-44441-350-2
• Povenmire, Hal (2003) Tektites: A Cosmic Enigma. Florida Fireball Network, Indian Harbour Beach, Florida. 209 pp.

External links

Wikimedia Commons has media related to Tektites.

Impact cratering on Earth Lists Worldwide Africa Antarctica Asia Australia Europe North America South America By country Confirmed ≥20 km diameter Acraman Amelia Creek Araguainha Beaverhead Boltysh Carswell Charlevoix Chesapeake Bay Chicxulub Clearwater East & West Gosses Bluff Haughton Kamensk Kara Karakul Keurusselkä Lappajärvi Logancha Manicouagan Manson Mistastin Mjølnir Montagnais Morokweng Nördlinger Ries Obolon' Popigai Presqu'île Puchezh-Katunki Rochechouart Saint Martin Shoemaker Siljan Ring Slate Islands Steen River Strangways Sudbury Tookoonooka Tunnunik Vredefort Woodleigh Yarrabubba Topics Alvarez hypothesis Breccia Coesite Complex crater Cretaceous–Paleogene boundary Cryptoexplosion Ejecta blanket Impact crater Impact structure Impactite Late Heavy Bombardment Lechatelierite Meteorite Moldavite Ordovician meteor event Planar deformation features Shatter cone Shock metamorphism Shocked quartz Stishovite Suevite Tektite Research Baldwin, Ralph Belknap Barringer, Daniel Barringer Medal Chao, Edward C T Dietz, Robert S Hartmann, William K Melosh, H Jay Ryder, Graham Schultz, Peter H Shoemaker, Eugene Earth Impact Database Impact Field Studies Group Lunar and Planetary Institute Traces of Catastrophe