Technetium

Technetium,  ₄₃Tc

General properties
Name, symbol	technetium, Tc
Pronunciation	/tɛkˈniːʃiəm/ tek-NEE-shee-əm
Appearance	shiny gray metal
Technetium in the periodic table
Mn ↑ Tc ↓ Re molybdenum ← technetium → ruthenium
Atomic number	43
Standard atomic weight	[98]
Element category	transition metal
Group, block	group 7, d-block
Period	period 5
Electron configuration	[Kr] 4d5 5s2
per shell	2, 8, 18, 13, 2
Physical properties
Phase	solid
Melting point	2430 K ​(2157 °C, ​3915 °F)
Boiling point	4538 K ​(4265 °C, ​7709 °F)
Density near r.t.	11 g·cm−3
Heat of fusion	33.29 kJ·mol−1
Heat of vaporization	585.2 kJ·mol−1
Molar heat capacity	24.27 J·mol−1·K−1
vapor pressure (extrapolated) P (Pa) 1 10 100 1 k 10 k 100 k at T (K) 2727 2998 3324 3726 4234 4894
Atomic properties
Oxidation states	7, 6, 5, 4, 3,[1] 2, 1,[1] −1, −3 ​(a strongly acidic oxide)
Electronegativity	Pauling scale: 1.9
Ionization energies	1st: 702 kJ·mol−1 2nd: 1470 kJ·mol−1 3rd: 2850 kJ·mol−1
Atomic radius	empirical: 136 pm
Covalent radius	147±7 pm
Miscellanea
Crystal structure	​hexagonal close-packed (hcp)
Speed of sound thin rod	16200 m·s−1 (at 20 °C)
Thermal expansion	7.1 µm·m−1·K−1[2] (at r.t.)
Thermal conductivity	50.6 W·m−1·K−1
Electrical resistivity	200 nΩ·m (at 20 °C)
Magnetic ordering	Paramagnetic
CAS Registry Number	7440-26-8
History
Prediction	Dmitri Mendeleev (1871)
Discovery and first isolation	Carlo Perrier and Emilio Segrè (1937)
Most stable isotopes
iso NA half-life DM DE (MeV) DP 95mTc syn 61 d ε – 95Mo γ 0.204, 0.582, 0.835 – IT 0.0389, e 95Tc 96Tc syn 4.3 d ε – 96Mo γ 0.778, 0.849, 0.812 – 97Tc syn 2.6×106 y ε – 97Mo 97mTc syn 91 d IT 0.965, e 97Tc 98Tc syn 4.2×106 y β− 0.4 98Ru γ 0.745, 0.652 – 99Tc trace 2.111×105 y β− 0.294 99Ru 99mTc syn 6.01 h IT 0.142, 0.002 99Tc γ 0.140 –

Technetium is a chemical element with symbol Tc and atomic number 43. It is the element with the lowest atomic number in the periodic table that has no stable isotopes: every form of it is radioactive. Nearly all technetium is produced synthetically, and only minute amounts are found in nature. Naturally occurring technetium occurs as a spontaneous fission product in uranium ore or by neutron capture in molybdenum ores. The chemical properties of this silvery gray, crystalline transition metal are intermediate between rhenium and manganese.

Many of technetium's properties were predicted by Dmitri Mendeleev before the element was discovered. Mendeleev noted a gap in his periodic table and gave the undiscovered element the provisional name ekamanganese (Em). In 1937, technetium (specifically the technetium-97 isotope) became the first predominantly artificial element to be produced, hence its name (from the Greek τεχνητός, meaning "artificial").

Its short-lived gamma ray-emitting nuclear isomer—technetium-99m—is used in nuclear medicine for a wide variety of diagnostic tests. Technetium-99 is used as a gamma ray-free source of beta particles. Long-lived technetium isotopes produced commercially are by-products of fission of uranium-235 in nuclear reactors and are extracted from nuclear fuel rods. Because no isotope of technetium has a half-life longer than 4.2 million years (technetium-98), its detection in 1952 in red giants, which are billions of years old, helped bolster the theory that stars can produce heavier elements.

History

Search for element 43

From the 1860s through 1871, early forms of the periodic table proposed by Dimitri Mendeleev contained a gap between molybdenum (element 42) and ruthenium (element 44). In 1871, Mendeleev predicted this missing element would occupy the empty place below manganese and therefore have similar chemical properties. Mendeleev gave it the provisional name ekamanganese (from eka-, the Sanskrit word for one, because the predicted element was one place down from the known element manganese.)^[3]

Early mis-identifications

Many early researchers, both before and after the periodic table was published, were eager to be the first to discover and name the missing element; its location in the table suggested that it should be easier to find than other undiscovered elements.

Year	Claimant	Suggested Name	Actual material
1828	Gottfried Osann	Polinium	Iridium
1846	R. Hermann	Ilmenium	Niobium-tantalum alloy
1847	Heinrich Rose	Pelopium[4]	Niobium-tantalum alloy
1877	Serge Kern	Davyum	Iridium-rhodium-iron alloy
1896	Prosper Barrière	Lucium	Yttrium
1908	Masataka Ogawa	Nipponium	Rhenium[5]

Unreproducible results

German chemists Walter Noddack, Otto Berg, and Ida Tacke reported the discovery of element 75 and element 43 in 1925, and named element 43 masurium (after Masuria in eastern Prussia, now in Poland, the region where Walter Noddack's family originated).^[6] The group bombarded columbite with a beam of electrons and deduced element 43 was present by examining X-ray diffraction spectrograms.^[7] The wavelength of the X-rays produced is related to the atomic number by a formula derived by Henry Moseley in 1913. The team claimed to detect a faint X-ray signal at a wavelength produced by element 43. Later experimenters could not replicate the discovery, and it was dismissed as an error for many years.^[8][9] Still, in 1933, a series of articles on the discovery of elements quoted the name masurium for element 43.^{[10][note 1]} It is still debated as to whether the 1925 team actually did discover element 43.^[11]

Official discovery and later history

The discovery of element 43 was finally confirmed in a December 1936 experiment at the University of Palermo in Sicily conducted by Carlo Perrier and Emilio Segrè.^[12] In mid-1936, Segrè visited the United States, first Columbia University in New York and then the Lawrence Berkeley National Laboratory in California. He persuaded cyclotron inventor Ernest Lawrence to let him take back some discarded cyclotron parts that had become radioactive. Lawrence mailed him a molybdenum foil that had been part of the deflector in the cyclotron.^[13]

Segrè enlisted his colleague Perrier to attempt to prove, through comparative chemistry, that the molybdenum activity was indeed from an element with Z = 43. They succeeded in isolating the isotopes technetium-95m and technetium-97.^[14][15] University of Palermo officials wanted them to name their discovery "panormium", after the Latin name for Palermo, Panormus. In 1947^[14] element 43 was named after the Greek word τεχνητός, meaning "artificial", since it was the first element to be artificially produced.^[4][6] Segrè returned to Berkeley and met Glenn T. Seaborg. They isolated the metastable isotope technetium-99m, which is now used in some ten million medical diagnostic procedures annually.^[16]

In 1952, astronomer Paul W. Merrill in California detected the spectral signature of technetium (specifically wavelengths of 403.1 nm, 423.8 nm, 426.2 nm, and 429.7 nm) in light from S-type red giants.^[17] The stars were near the end of their lives, yet were rich in this short-lived element, meaning nuclear reactions within the stars must be producing it. This evidence was used to bolster the then-unproven theory that stars are where nucleosynthesis of the heavier elements occurs.^[15] More recently, such observations provided evidence that elements were being formed by neutron capture in the s-process.^[18]

Since its discovery, there have been many searches in terrestrial materials for natural sources of technetium. In 1962, technetium-99 was isolated and identified in pitchblende from the Belgian Congo in extremely small quantities (about 0.2 ng/kg);^[18] there it originates as a spontaneous fission product of uranium-238. There is also evidence that the Oklo natural nuclear fission reactor produced significant amounts of technetium-99, which have since decayed into ruthenium-99.^[18]

Characteristics

Physical properties

Technetium is a silvery-gray radioactive metal with an appearance similar to that of platinum. It is commonly obtained as a gray powder.^[19] The crystal structure of the pure metal is hexagonal close-packed. Atomic technetium has characteristic emission lines at these wavelengths of light: 363.3 nm, 403.1 nm, 426.2 nm, 429.7 nm, and 485.3 nm.^[20]

The metal form is slightly paramagnetic, meaning its magnetic dipoles align with external magnetic fields, but will assume random orientations once the field is removed.^[21] Pure, metallic, single-crystal technetium becomes a type-II superconductor at temperatures below 7.46 K.^{[note 2][22]} Below this temperature, technetium has a very high magnetic penetration depth, the largest among the elements apart from niobium.^[23]

Chemical properties

Technetium is placed in the seventh group of the periodic table, between rhenium and manganese. As predicted by the periodic law, its chemical properties are therefore intermediate between those two elements. Of the two, technetium more closely resembles rhenium, particularly in its chemical inertness and tendency to form covalent bonds.^[24] Unlike manganese, technetium does not readily form cations (ions with a net positive charge). Technetium exhibits nine oxidation states from -1 to +7, where the most common oxidation states include +4, +5, and +7.^[25] Technetium dissolves in aqua regia, nitric acid, and concentrated sulfuric acid, but it is not soluble in hydrochloric acid of any concentration.^[19]

To its multiplicity of valencies is attributed its ability to catalyse the destruction of hydrazine by nitric acid.^[26] This caused a problem (resolved by process modifications) in the separation of plutonium from uranium in nuclear fuel processing, where hydrazine is used as a protective reductant to keep plutonium in the trivalent rather than the more stable tetravalent state. The problem was exacerbated by the mutually-enhanced solvent extraction of technetium and zirconium at the previous stage [Co-extraction of pertechnetate and zirconium by tri-n-butyl phosphate, John Garraway & Peter D. Wilson, Journal of the Less-Common Metals, 106(1), (1985) pp 183 – 191].^[27]

Hydride and oxides

The reaction of technetium with hydrogen produces the negatively charged hydride TcH2−
9 ion, which has the same type of crystal structure as (is isostructural with) ReH2−
9. It consists of a trigonal prism with a technetium atom in the center and six hydrogen atoms at the corners. Three more hydrogen atoms make a triangle lying parallel to the base and crossing the prism in its center. Although those hydrogen atoms are not equivalent geometrically, their electronic structure is almost the same. This complex has a coordination number of 9 (meaning that the technetium atom has nine neighbors), which is the highest for a technetium complex. Two hydrogen atoms in the complex can be replaced by sodium (Na⁺) or potassium (K⁺) ions.^[28]

Metallic technetium slowly tarnishes in moist air,^[25] and in powder form, will burn in oxygen. Two oxides have been observed: TcO₂ and Tc₂O₇. Under oxidizing conditions, which tend to strip electrons from atoms, technetium(VII) will exist as the pertechnetate ion, TcO−
4.^[21][25]

At temperatures of 400–450 °C, technetium oxidizes to form the pale-yellow heptoxide:

4 Tc + 7 O₂ → 2 Tc₂O₇

This compound adopts a centrosymmetric structure with two types of Tc-O bonds; their bond lengths are 167 and 184 pm, and the O-Tc-O angle is 180°.^[29]

Technetium heptoxide is the precursor to sodium pertechnetate:^[30]

Tc₂O₇ + 2 NaOH → 2 NaTcO₄ + H₂O

Black-colored technetium dioxide (TcO₂) can be produced by reduction of heptoxide with technetium or hydrogen.^[31]

Pertechnetic acid (HTcO₄) is produced by reacting Tc₂O₇ with water or oxidizing acids, such as nitric acid, concentrated sulfuric acid, aqua regia, or a mixture of nitric and hydrochloric acids.^[32] The resulting dark red, hygroscopic (water absorbing) substance is a strong acid and easily donates protons. In concentrated sulfuric acid Tc(VII) tetraoxidotechnetate anion converts to the octahedral form of technetic(VII) acid TcO₃(OH)(H₂O)₂.^[33]

The pertechnate (tetroxidotechnetate) anion TcO−
4 consists of a tetrahedron with oxygens in the corners and a technetium atom in the center. Unlike permanganate (MnO−
4), it is only a weak oxidizing agent. Pertechnate is often used as a convenient water-soluble source of technetium isotopes, such as ^99mTc, and as a catalyst.^[34]

Sulfides, selenides, and tellurides

Technetium forms various sulfides. TcS₂ is obtained by direct reaction of technetium and elemental sulfur, while Tc₂S₇ is formed from the pertechnic acid as follows:

2 HTcO₄ + 7 H₂S → Tc₂S₇ + 8 H₂O

In this reaction technetium is reduced to Tc(IV) while excess sulfur forms a disulfide ligand. The produced technetium heptasulfide has a polymeric structure (Tc₃(µ³–S)(S₂)₃S₆)_n with a core similar to Mo₃(µ³–S)(S₂)₆²⁻.^[35]

Upon heating, technetium heptasulfide decomposes into disulfide and elementary sulfur:

Tc₂S₇ → 2 TcS₂ + 3 S

Analogous reactions occur with selenium and tellurium.^[36]

Technetium carbide and orthorhombic technetium metal phase

When small amounts of carbon are present in technetium metal, its ideal close-packed hexagonal crystal structure is distorted to orthorhombic technetium metal structure. Higher content of carbon (starting from 15–17% at.) provide complete conversion of technetium metal to cubic technetium carbide with approximate composition of Tc₆C. The further increase in carbon content does not provide any change in technetium carbide structure.^[37]

Clusters and organic complexes

Several technetium clusters are known, including Tc₄, Tc₆, Tc₈ and Tc₁₃.^[38][39] The more stable Tc₆ and Tc₈ clusters have prism shapes where vertical pairs of Tc atoms are connected by triple bonds and the planar atoms by single bonds. Every technetium atom makes six bonds, and the remaining valence electrons can be saturated by one axial and two bridging ligand halogen atoms such as chlorine or bromine.^[40]

Technetium forms numerous organic complexes, which are relatively well-investigated because of their importance for nuclear medicine. Technetium carbonyl (Tc₂(CO)₁₀) is a white solid.^[42] In this molecule, two technetium atoms are weakly bound to each other; each atom is surrounded by octahedra of five carbonyl ligands. The bond length between technetium atoms, 303 pm,^[43][44] is significantly larger than the distance between two atoms in metallic technetium (272 pm). Similar carbonyls are formed by technetium's congeners, manganese and rhenium.^[45]

A technetium complex^{[note 3]} with an organic ligand (shown in the figure on right) is commonly used in nuclear medicine. It has a unique Tc-O functional group (moiety) oriented perpendicularly to the plane of the molecule, where the oxygen atom can be replaced by a nitrogen atom.^[46]

Isotopes

Technetium, with atomic number (denoted Z) 43, is the lowest-numbered element in the periodic table that is exclusively radioactive. The second-lightest, exclusively radioactive element, promethium, has an atomic number of 61.^[25] Atomic nuclei with an odd number of protons are less stable than those with even numbers, even when the total number of nucleons (protons + neutrons) is even.^[47] Odd numbered elements therefore have fewer stable isotopes.

The most stable radioactive isotopes are technetium-98 with a half-life of 4.2 million years (Ma), technetium-97 (half-life: 2.6 Ma) and technetium-99 (half-life: 211,000 years).^[48] Thirty other radioisotopes have been characterized with mass numbers ranging from 85 to 118.^[48] Most of these have half-lives that are less than an hour; the exceptions are technetium-93 (half-life: 2.73 hours), technetium-94 (half-life: 4.88 hours), technetium-95 (half-life: 20 hours), and technetium-96 (half-life: 4.3 days).^[49]

The primary decay mode for isotopes lighter than technetium-98 (⁹⁸Tc) is electron capture, giving molybdenum (Z = 42).^[48] For technetium-98 and heavier isotopes, the primary mode is beta emission (the emission of an electron or positron), giving ruthenium (Z = 44), with the exception that technetium-100 can decay both by beta emission and electron capture.^[48][50]

Technetium also has numerous nuclear isomers, which are isotopes with one or more excited nucleons. Technetium-97m (^97mTc; 'm' stands for metastability) is the most stable, with a half-life of 91 days (0.0965 MeV).^[49] This is followed by technetium-95m (half-life: 61 days, 0.03 MeV), and technetium-99m (half-life: 6.01 hours, 0.142 MeV).^[49] Technetium-99m only emits gamma rays and decays to technetium-99.^[49]

Technetium-99 (⁹⁹Tc) is a major product of the fission of uranium-235 (²³⁵U), making it the most common and most readily available isotope of technetium. One gram of technetium-99 produces 6.2×10⁸ disintegrations a second (that is, 0.62 GBq/g).^[21]

Occurrence and production

Only minute traces of technetium occur naturally in the Earth's crust. This is due to the fact that technetium's half-life is only 4.2 million years. Over a thousand half-lives have passed since the formation on the Earth, so the probability that even one atom of primordial technetium should still exist is essentially zero. However, small amounts do exist as spontaneous fission products in uranium ores. A kilogram of uranium contains an estimated 1 nanogram (10⁻⁹ g) of technetium.^[15][51][52] Some red giant stars with the spectral types S-, M-, and N contain an absorption line in their spectrum indicating the presence of technetium.^[19][53] These red-giants are known informally as technetium stars.

Fission waste product

In contrast with its rare natural occurrence, bulk quantities of technetium-99 are produced each year from spent nuclear fuel rods, which contain various fission products. The fission of a gram of uranium-235 in nuclear reactors yields 27 mg of technetium-99, giving technetium a fission product yield of 6.1%.^[21] Other fissile isotopes also produce similar yields of technetium, such as 4.9% from uranium-233 and 6.21% from plutonium-239.^[54] About 49,000 TBq (78 metric tons) of technetium is estimated to have been produced in nuclear reactors between 1983 and 1994, which is by far the dominant source of terrestrial technetium.^[55][56] Only a fraction of the production is used commercially.^{[note 4]}

Technetium-99 is produced by the nuclear fission of both uranium-235 and plutonium-239. It is therefore present in radioactive waste and in the nuclear fallout of fission bomb explosions. Its decay, measured in becquerels per amount of spent fuel, is dominant after about 10⁴ to 10⁶ years after the creation of the nuclear waste.^[55] From 1945 to 1994, an estimated 160 TBq (about 250 kg) of technetium-99 was released into the environment by atmospheric nuclear tests.^[55][57] The amount of technetium-99 from nuclear reactors released into the environment up to 1986 is on the order of 1000 TBq (about 1600 kg), primarily by nuclear fuel reprocessing; most of this was discharged into the sea. Reprocessing methods have reduced emissions since then, but as of 2005 the primary release of technetium-99 into the environment is by the Sellafield plant, which released an estimated 550 TBq (about 900 kg) from 1995–1999 into the Irish Sea.^[56] From 2000 onwards the amount has been limited by regulation to 90 TBq (about 140 kg) per year.^[58] Discharge of technetium into the sea has resulted in some seafood containing minuscule quantities of this element. For example, European lobster and fish from west Cumbria contain about 1 Bq/kg of technetium.^{[59][60][note 5]}

Fission product for commercial use

The metastable isotope technetium-99m is continuously produced as a fission product from the fission of uranium or plutonium in nuclear reactors. Because used fuel is allowed to stand for several years before reprocessing, all molybdenum-99 and technetium-99m will have decayed by the time that the fission products are separated from the major actinides in conventional nuclear reprocessing. The liquid left after plutonium–uranium extraction (PUREX) contains a high concentration of technetium as TcO−
4 but almost all of this is technetium-99, not technetium-99m.^[61]

The vast majority of the technetium-99m used in medical work is produced by irradiating dedicated highly enriched uranium targets in a reactor, extracting molybdenum-99 from the targets in reprocessing facilities,^[62] and recovering at the diagnostic center the technetium-99m that is produced upon decay of molybdenum-99.^[63][64] Molybdenum-99 in the form of molybdate MoO2−
4 is adsorbed onto acid alumina (Al
2O
3) in a shielded column chromatograph inside a technetium-99m generator ("technetium cow", also occasionally called a "molybdenum cow"). Molybdenum-99 has a half-life of 67 hours, so short-lived technetium-99m (half-life: 6 hours), which results from its decay, is being constantly produced.^[15] The soluble pertechnetate TcO−
4 can then be chemically extracted by elution using a saline solution.

By irradiating a highly enriched uranium target to produce molybdenum-99, there is no need for the complex chemical steps which would be required to separate molybdenum from a fission product mixture. A drawback of this process is that it requires targets containing uranium-235, which are subject to the security precautions of fissile materials.^[65][66]

Almost two-thirds of the world's supply comes from two reactors; the National Research Universal Reactor at Chalk River Laboratories in Ontario, Canada, and the High Flux Reactor at Nuclear Research and Consultancy Group in Petten, Netherlands. All major technetium-99m producing reactors were built in the 1960s and are close to the end of their lifetime. The two new Canadian Multipurpose Applied Physics Lattice Experiment reactors planned and built to produce 200% of the demand of technetium-99m relieved all other producers from building their own reactors. With the cancellation of the already tested reactors in 2008 the future supply of technetium-99m became very problematic.^[67]

However the Chalk River reactor has been shut down for maintenance since August 2009, with an expected reopening in April 2010, and the Petten reactor had a 6-month scheduled maintenance shutdown beginning on Friday, February 19, 2010. With millions of procedures relying on technetium-99m every year, the low supply has left a gap, leaving some practitioners to revert to techniques not used for 20 years. Somewhat allaying this issue is an announcement from the Polish Maria research reactor that they have developed a technique to isolate technetium.^[68] The reactor at Chalk River Laboratory reopened in August 2010 and the Petten reactor reopened September 2010.^[69]

Waste disposal

The long half-life of technetium-99 and its ability to form an anionic species makes it a major concern for long-term disposal of radioactive waste. Many of the processes designed to remove fission products in reprocessing plants aim at cationic species like caesium (e.g., caesium-137) and strontium (e.g., strontium-90). Hence the pertechnetate is able to escape through these treatment processes. Current disposal options favor burial in continental, geologically stable rock. The primary danger with such a course is that the waste is likely to come into contact with water, which could leach radioactive contamination into the environment. The anionic pertechnetate and iodide do not adsorb well onto the surfaces of minerals, so they are likely to be washed away. By comparison plutonium, uranium, and caesium are much more able to bind to soil particles. Technetium could also be immobilized by some environments, such as lake bottom sediments, due to microbial activity;^[70] for this reason, the environmental chemistry of technetium is an active area of research.^[71]

An alternative disposal method, transmutation, has been demonstrated at CERN for technetium-99. This transmutation process is one in which the technetium (technetium-99 as a metal target) is bombarded with neutrons to form the short-lived technetium-100 (half-life = 16 seconds) which decays by beta decay to ruthenium-100. If recovery of usable ruthenium is a goal, an extremely pure technetium target is needed; if small traces of the minor actinides such as americium and curium are present in the target, they are likely to undergo fission and form more fission products which increase the radioactivity of the irradiated target. The formation of ruthenium-106 (half-life 374 days) from the 'fresh fission' is likely to increase the activity of the final ruthenium metal, which will then require a longer cooling time after irradiation before the ruthenium can be used.^[72]

The actual separation of technetium-99 from spent nuclear fuel is a long process. During fuel reprocessing, it appears in the waste liquid, which is highly radioactive. After sitting for several years, the radioactivity falls to a point where extraction of the long-lived isotopes, including technetium-99, becomes feasible. Several chemical extraction processes are then used, yielding technetium-99 metal of high purity.^[73]

Neutron activation

Molybdenum-99, which decays to form technetium-99m, can be formed by the neutron activation of molybdenum-98.^[74] Other technetium isotopes are not produced in significant quantities by fission; when needed, they are manufactured by neutron irradiation of parent isotopes (for example, technetium-97 can be made by neutron irradiation of ruthenium-96).^[75]

Particle accelerators

The feasibility of technetium-99m production with the 22-MeV-proton bombardment of a molybdenum-100 target in medical cyclotrons following the reaction ¹⁰⁰Mo(p,2n)^99mTc was demonstrated in 1971.^[76] The recent shortages of medical technetium-99m reignited the interest in its production by proton bombardment of isotopically-enriched (>99.5%) molybdenum-100 targets.^[77] Other particle accelerator-based isotope production techniques have been investigated to obtain molybdenum-99 from molybdenum-100 via (n,2n) or (γ,n) reactions.^[78][79][80]

Applications

Nuclear medicine and biology

Technetium-99m ("m" indicates that this is a metastable nuclear isomer) is used in radioactive isotope medical tests, for example as the radioactive part of a radioactive tracer that medical equipment can detect in the human body.^[15] It is well suited to the role because it emits readily detectable 140 keV gamma rays, and its half-life is 6.01 hours (meaning that about 94% of it decays to technetium-99 in 24 hours).^[21] The chemistry of technetium allows it to be bound to a variety of non-radioactive compounds. It is the entire compound that determines how it is metabolized. Therefore a single radioactive isotope can be used for a multitude of diagnostic tests. There are more than 50 commonly used radiopharmaceuticals based on technetium-99m for imaging and functional studies of the brain, myocardium, thyroid, lungs, liver, gallbladder, kidneys, skeleton, blood, and tumors.^[81]

The longer-lived isotope technetium-95m, with a half-life of 61 days, is used as a radioactive tracer to study the movement of technetium in the environment and in plant and animal systems.^[82]

Industrial and chemical

Technetium-99 decays almost entirely by beta decay, emitting beta particles with consistent low energies and no accompanying gamma rays. Moreover, its long half-life means that this emission decreases very slowly with time. It can also be extracted to a high chemical and isotopic purity from radioactive waste. For these reasons, it is a National Institute of Standards and Technology (NIST) standard beta emitter, and is therefore used for equipment calibration.^[83] Technetium-99 has also been proposed for use in optoelectronic devices and nanoscale nuclear batteries.^[84]

Like rhenium and palladium, technetium can serve as a catalyst. For some reactions, for example the dehydrogenation of isopropyl alcohol, it is a far more effective catalyst than either rhenium or palladium. However, its radioactivity is a major problem in finding safe catalytic applications.^[85]

When steel is immersed in water, adding a small concentration (55 ppm) of potassium pertechnetate(VII) to the water protects the steel from corrosion, even if the temperature is raised to 250 °C.^[86] For this reason, pertechnetate has been used as a possible anodic corrosion inhibitor for steel, although technetium's radioactivity poses problems which limit this application to self-contained systems.^[87] While (for example) CrO2−
4 can also inhibit corrosion, it requires a concentration ten times as high. In one experiment, a specimen of carbon steel was kept in an aqueous solution of pertechnetate for 20 years and was still uncorroded.^[86] The mechanism by which pertechnetate prevents corrosion is not well understood, but seems to involve the reversible formation of a thin surface layer. One theory holds that the pertechnetate reacts with the steel surface to form a layer of technetium dioxide which prevents further corrosion; the same effect explains how iron powder can be used to remove pertechnetate from water. (Activated carbon can also be used for the same effect.) The effect disappears rapidly if the concentration of pertechnetate falls below the minimum concentration or if too high a concentration of other ions is added.^[88]

As noted, the radioactive nature of technetium (3 MBq per liter at the concentrations required) makes this corrosion protection impractical in almost all situations. Nevertheless, corrosion protection by pertechnetate ions was proposed (but never adopted) for use in boiling water reactors.^[88]

Precautions

Technetium plays no natural biological role and is not normally found in the human body.^[19] Technetium is produced in quantity by nuclear fission, and spreads more readily than many radionuclides. It appears to have low chemical toxicity. For example, no significant change in blood formula, body and organ weights, and food consumption could be detected for rats which ingested up to 15 µg of technetium-99 per gram of food for several weeks.^[89] The radiological toxicity of technetium (per unit of mass) is a function of compound, type of radiation for the isotope in question, and the isotope's half-life.^[90]

All isotopes of technetium must be handled carefully. The most common isotope, technetium-99, is a weak beta emitter; such radiation is stopped by the walls of laboratory glassware. The primary hazard when working with technetium is inhalation of dust; such radioactive contamination in the lungs can pose a significant cancer risk. For most work, careful handling in a fume hood is sufficient; a glove box is not needed.^[91]

Notes

References

Bibliography

• Cotton, F. A.; Wilkinson, G.; Murillo, C. A.; Bochmann, M. (1999). Advanced Inorganic Chemistry (6th ed.). New York: John Wiley & Sons, Inc. ISBN 0-471-19957-5. 
• Emsley, J. (2001). Nature's Building Blocks: An A-Z Guide to the Elements. Oxford, England, UK: Oxford University Press. ISBN 0-19-850340-7. 
• Greenwood, N. N.; Earnshaw, A. (1997). Chemistry of the Elements (2nd ed.). Oxford: Butterworth-Heinemann. ISBN 0-7506-3365-4. 
• Heiserman, D. L. (1992). "Element 43: Technetium". Exploring Chemical Elements and their Compounds. New York: TAB Books. ISBN 0-8306-3018-X. 
• Schwochau, K. (2000). Technetium: chemistry and radiopharmaceutical applications. Wiley-VCH. ISBN 3-527-29496-1. 

Further reading

Wikimedia Commons has media related to Technetium.

• B.J. Wilson, ed. (1966). The radiochemical Manual (2nd ed.). ISBN 0-7058-1768-7. 
• Scerri, E.R. (2007). The Periodic Table, Its Story and Its Significance. Oxford University Press. ISBN 0-19-530573-6. 
• Choppin, G.; Liljenzin, J-O; Rydberg, J. (2002). "Nuclear Mass and Stability". Radiochemistry and nuclear chemistry (3rd ed.). Butterworth-Heinemann. pp. 41–57. ISBN 978-0-7506-7463-8. 
• EnvironmentalChemistry.com – Technetium
• Nudat 2 nuclide chart from the National Nuclear Data Center, Brookhaven National Laboratory
• Nuclides and Isotopes Fourteenth Edition: Chart of the Nuclides, General Electric Company, 1989
• Chemistry in its element podcast (MP3) from the Royal Society of Chemistry's Chemistry World: Technetium

External links

Look up technetium in Wiktionary, the free dictionary.

• Technetium at The Periodic Table of Videos (University of Nottingham)

Periodic table (Large cells)
	1	2															3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18
1	H																															He
2	Li	Be																									B	C	N	O	F	Ne
3	Na	Mg																									Al	Si	P	S	Cl	Ar
4	K	Ca															Sc	Ti	V	Cr	Mn	Fe	Co	Ni	Cu	Zn	Ga	Ge	As	Se	Br	Kr
5	Rb	Sr															Y	Zr	Nb	Mo	Tc	Ru	Rh	Pd	Ag	Cd	In	Sn	Sb	Te	I	Xe
6	Cs	Ba	La	Ce	Pr	Nd	Pm	Sm	Eu	Gd	Tb	Dy	Ho	Er	Tm	Yb	Lu	Hf	Ta	W	Re	Os	Ir	Pt	Au	Hg	Tl	Pb	Bi	Po	At	Rn
7	Fr	Ra	Ac	Th	Pa	U	Np	Pu	Am	Cm	Bk	Cf	Es	Fm	Md	No	Lr	Rf	Db	Sg	Bh	Hs	Mt	Ds	Rg	Cn	113	Fl	115	Lv	117	118
Alkali metal Alkaline earth metal Lan­thanide Actinide Transition metal Post-​transition metal Metalloid Polyatomic nonmetal Diatomic nonmetal Noble gas Unknown chemical properties

Technetium compounds Technetium(IV) TcCl4 Technetium(VI) TcF6 Technetium(VII) Tc2O7 HTcO4 NaTcO4