Tea pet
Tea Pet, also known as a tea lover's pet, refers to a type of traditional craft from China. Its history can be traced back to the Yuan dynasty (1206–1368). It is usually made of a special clay, “Zisha” (also known as Yixing clay), from the region near Yixing in Jiangsu province, China. Just like Yixing teapots made of clay, tea pets are unglazed, so that they are mostly monochromatic with a rough surface.[1] As the name implies, a tea pet is like a pet raised by tea lovers. Tea lovers in China raise a tea pet by placing it on the tea tray during tea time and pouring out the tea over it. The most popular figure of the tea pet is the “pee-pee boy”, which is used to judge whether the water is hot enough to make tea. Tea pets are also molded into zodiac animals or Chinese mythical creatures such as dragons, Pixiu, Qilin, etc., to symbolize good luck, fortune and happiness, as well as historical or mythical characters such as Guanyin, Maitreya and Zhu Geliang.
History
The birthplace of Tea pets, Yixing, was first famous as the birthplace of “Yixing clay” in Song dynasty (960 – 1279).[2] With the popularity of the Yixing clay teapot, Yixing became a production center for teaware since then. As early as the Yuan dynasty (1206–1368), the tea pet was made in Yixing for the first time. Teapot artisans started to mold Yixing clay into various mythical creatures or animals as mascots for tea lovers. However, probably because the ancient Chinese scholars believe in a saying that “excessive attention to trivia saps the will”, there is very limited literature on the development of tea pets in Chinese history. Nowadays, even with the development of the technology-- it is not hard to find alternatives to Yixing clay as the material to make tea pets-- the production is still concentrated in Yixing region.
Types
A Tea pet is handmade using Zisha (Yixing clay) and unglazed, so it is usually in the natural color of Yixing clay. There are three kinds of Yixing clay: purple clay, red clay, and green clay. A tea pet can be made of either of one of these Yixing clays, or a mixture of two clays to produce different colors.
Purple clay, is the principle clay, which turns red-brown or dark-brown after firing. The artisan often adds iron clay to achieve a better color effect.
Red clay, also known as “Stock Yellow”, has a much higher contraction percentage than purple clay, and shows a vermillion color after firing. Because of its high contraction percentage, red clay is more suitable for making small-sized objects like tea pets and teapots.
Green clay has a color similar to duck egg shell, and appears off-white after firing. It is rarer than purple clay, and more expensive on the market.
Raise a Tea Pet
The way that tea lovers raise a tea pet is quite similar to the way that they maintain a Yixing clay teapot. It is a very time-consuming process. They often pour leftover tea over their tea pets, and use a tea brush to wipe the surface of the tea pet to help it absorb the tea evenly. Tea pets should be only rinsed with water, without using soap or any dishwashing liquid, to ensure a progressive increase in the fragrance and color of the tea. After prolonged maintenance, over months or years, the tea pet will absorb the tea, and its appearance will become glossier along with the aroma of the tea.
Pee pee boy
Pee pee boy is the most representative and popular figure among tea pets. It is about 3 inch tall with a red-brown color. The ability to judge the water temperature is its most useful quality contributing to the popularity of the form. To do this, a tea lover immerses it in cold water until it is filled up and shakes it to make sure it is filled at least 50 percent with water; after that, hot water poured over the pee pee boy will make it “pee” if the water is hot enough. The hotter the water, the further he pees. The principle behind the pee pee boy is thermal expansion of air. It is designed to be hollow with only one very tiny opening, so that water can flow into the pee pee boy slowly and will not drip out until sufficiently hot water is poured on its head. When hot water is poured over it, the air in the pee pee boy expands, and the water is squeezed out through the tiny opening. With this feature, the pee pee boy soon became the most popular figure in tea pets. And recently, more and more artisans also utilize this technology on other tea pets, such as water-breathing dragons or a water-spraying longevity tortoises, to provide more choices for tea lovers.