Taneatua Branch

Taneatua Branch
Overview
Status Closed
Termini Hawkens Junction
Taneatua
Operation
Opening 1928
Closed 2003
Owner New Zealand Railways Corporation
Operator(s) KiwiRail
Character Rural
Rolling stock None
Technical
Line length 25 km (16 mi)
No. of tracks Single
Track gauge 1,067 mm (3 ft 6 in)

The Taneatua Branch is a branch railway line from Hawkens Junction to Taneatua in the Bay of Plenty, New Zealand.

From 2 September 1928 to 1978 the line was part of the East Coast Main Trunk line from Hamilton. With the opening of the Kaimai tunnel in 1978, the terminus of the East Coast Main Trunk line was changed to Kawerau and the section of line between Hawkens Junction and Taneatua became the Taneatua Branch line.

This line across the Rangitaiki Plains follows an inland or southerly route to avoid areas which were swampy at the time of construction, therefore bypassing Whakatane, the largest town in the area. The intention was for the line to be extended from Taneatua to Opotiki, then onwards east to connect with the isolated Gisborne Section line from Gisborne. Some construction work was carried out beyond Taneatua towards Opotiki in 1928, but this was stopped when the Government of the day transferred the construction workers to the Rotorua-Taupo line which it had just approved the construction of. Various routes were investigated and surveyed to link the difficult section between Taneatua and Moutohora, but all were found to be difficult and expensive. Following the Great Depression, World War 2 and the greater availability of road vehicles in the period after the war, the proposal was subsequently dropped and Taneatua remained the eastern terminus of the railway line in the Bay of Plenty. Gisborne was subsequently linked to the south with Wellington by way of Napier and Palmerston North with the Palmerston North – Gisborne Line in 1942. The isolated Gisborne Section line became the Moutohora Branch line, which closed in 1959.

The line to Taneatua was run as the end section of the East Coast Main Trunk from 1928 to 1978. Freight services continued to be operated on the line until 2001.

A passenger service was provided on the line with the Taneatua Express from Auckland between 1928 and 1959. In 1959 railcars replaced this service, but the new railcar services only operated between Auckland and Te Puke, due to negligible passenger traffic between Te Puke and Taneatua.

The Whakatane Board Mills Line, a private line, was built and operated by the Whakatane Board Mills from Awakeri to their mill in 1939 to serve their large operation. This line was privately operated by the mill until 1999 when the then national rail operator Tranz Rail, took over the operation of the line. Tranz Rail discontinued operating the line in 2001 and the line was closed in 2003, together with the mothballing of the entire Taneatua Branch line.

References

Further reading