Symmetrical All Wheel Drive

Symmetrical All Wheel Drive (also known as Symmetrical AWD or SAWD) is a full-time four wheel drive system developed by Japanese automobile manufacturer Subaru. The SAWD system consists of a longitudinally mounted boxer engine coupled to a symmetrical drivetrain with equal length half-axles. The combination of the symmetrical layout with a flat engine and transmission balanced over the front axle provides optimum weight distribution with a low center of gravity, improving car handling characteristics.[1] Since 1996, most international market Subaru vehicles include SAWD as standard equipment, with the rear wheel drive BRZ and kei cars as the exceptions.[2]

History

The earliest version of Subaru SAWD debuted in September 1972 as an optional part-time mechanical four wheel drive system for the first-generation Subaru Leone Wagon.[3] In 1986, the automatic non-turbocharged version of the Subaru XT was equipped with the first full-time SAWD system, with an electronically controlled version introduced in 1987. Variable Torque Distribution (VTD) AWD was first introduced in 1991, with the addition of Vehicle Dynamics Control (VDC) in 1998, allowing for better control of the all wheel drive system.[4] Modern implementations of SAWD are used in conjunction with VDC, ABS, and traction control for enhanced handling performance.

Variants

Active torque split AWD

First introduced in 1987 for the Subaru XT, the active torque split AWD variant uses an electronically controlled multi-plate transfer clutch for a default torque distribution of 60% front, 40% rear ratio. Torque distribution is adjusted up to a 50:50 split in realtime with input from the throttle, transmission, engine control unit and wheel speed sensors.[1] Active torque split AWD is paired with 4-speed automatic transmissions and Subaru's chain-driven Lineartronic continuously variable transmission (CVT).[5]

Variable torque distribution AWD

The 1991 Subaru SVX was equipped with the first version of variable torque distribution (VTD) AWD with a normal torque split of 36% front, 64% rear, later implementations of VTD use a torque split of 45% front, 55% rear. The rear biased torque distribution reduces understeer, which occurs in AWD vehicles. VTD AWD uses a multi-plate clutch in conjunction with planetary gears in the center differential and a viscous coupling rear differential to distribute torque up to a 50:50 ratio. With the addition of VDC, all torque can be sent to a single wheel.[1][5][4]

Viscous centre differential AWD

Subaru vehicles equipped with manual transmissions use a viscous limited slip centre differential (VCD) AWD system, which by default distributes torque evenly between the front and rear axles.[1][5]

Multi-mode Driver Control Centre Differential AWD

The Subaru WRX STI exclusively uses the Multi-mode Driver Control Centre Differential (DCCD) AWD system, it uses a torque sensing mechanical limited slip differential (LSD) with an electronic LSD to distribute torque with a 41% front and 59% rear split. Multi-mode DCCD AWD is able to operate in automatic mode or manual mode, where the driver is able to adjust the distribution of torque on the fly.[6][7]

See also

References

  1. ↑ 1.0 1.1 1.2 1.3 "Subaru Technology Overview". Subaru Global. Fuji Heavy Industries. October 6, 2008. Retrieved November 19, 2014.
  2. ↑ "Subaru History Book" (PDF). Fuji Heavy Industries. Retrieved November 19, 2014.
  3. ↑ "Subaru History". Subaru Global. Fuji Heavy Industries. Retrieved November 19, 2014.
  4. ↑ 4.0 4.1 "Symmetrical AWD" (in German). Subaru Deutschland GmbH. Archived from the original on March 18, 2012. Retrieved November 19, 2014.
  5. ↑ 5.0 5.1 5.2 "Symmetrical AWD". Subaru Global. Fuji Heavy Industries. October 6, 2008. Retrieved November 19, 2014.
  6. ↑ "Multi-Mode DCCD". Subaru Global. Fuji Heavy Industries. Retrieved November 19, 2014.
  7. ↑ "Subaru Commemorates the 40th Anniversary of Its AWD Vehicles" (PDF). Subaru Global. Fuji Heavy Industries. February 10, 2012. Retrieved November 19, 2014.