Survey township

1826 map of the Connecticut Western Reserve in northern Ohio showing both survey and civil townships. The survey townships are represented by the numbers (horizontal "town" and vertical "range" numbers) while the civil townships using the same boundaries are represented by the names.
1877 map of Warren County, Indiana. Among all civil townships, only Pine Township exactly matches a survey township with 36 sections.

Survey township, sometimes called Congressional township, as used by the United States Public Land Survey System, refers to a square unit of land, that is nominally six (U.S. Survey) miles (~9.7 km) on a side. Each 36-square-mile (~93 km2) township is divided into 36 one-square-mile (~2.6 km2) sections, that can be further subdivided for sale, and each section covers exactly 640 acres (2.6 km2). The townships are referenced by a numbering system that locates the township in relation to a meridian (north-south) and a base line (east-west). Townships were originally surveyed and platted by the US General Land Office using contracted private survey crews and are marked on the U.S. Geological Survey topographic maps.

History

Prior to standardization, some of the Ohio Lands were surveyed into townships of 5 miles (8.0 km) on each side. These are often known as Congressional Townships.[1][2]

Sections are divided into quarter-sections of 160 acres (65 ha) each and quarter-quarter sections of 40 acres (16 ha) each. In the Homestead Act of 1862, one quarter-section of land was the amount allocated to each settler. Stemming from this are the idiomatic expressions, "the lower 40", which is the 40 acres on a settler's land that is lowest in elevation, in the direction towards which water drains toward a stream, and the "back forty", the portion farthest from the settler's dwelling.

Survey township vs. civil township

Survey townships are distinct from civil townships. A survey township is used to establish boundaries for land ownership. A civil township is a form of local government. In states with civil townships, the boundaries of survey townships are often coterminous with civil townships. County lines, especially in western States, usually follow township lines, leading to the large number of rectangular counties in the West, which are agglomerations of survey townships.[3]

In western Canada, the Dominion Land Survey adopted a similar format for survey townships, which do not form administrative units. These townships also have the area of 36 square miles (six miles by six miles).

See also

References

  1. ↑ A History of the Rectangular Survey System by C. Albert White, 1983, Pub: Washington, D.C. : U.S. Dept. of the Interior, Bureau of Land Management : For sale by Supt. of Docs., U.S. G.P.O.,
  2. ↑ http://www.blm.gov/wo/st/en/prog/more/cadastralsurvey/cadastral_history.html
  3. ↑ Geological Survey Circular. The Survey. 1933. p. 24.