Statue of Freedom

Statue of Freedom (1857–62)

The Statue of Freedom—also known as Armed Freedom or simply Freedom—is a bronze statue designed by Thomas Crawford (1814–1857) that, since 1863, has crowned the dome of the U.S. Capitol in Washington, D.C. Originally named Freedom Triumphant in War and Peace, official U.S. government publications now state that the statue "is officially known as the Statue of Freedom".^[1] The statue depicts a female figure wearing a military helmet and holding a sheathed sword in her right hand and a laurel wreath and shield in her left.^[2]

Description

Freedom is a colossal bronze standing figure 19½-feet (6 meters) tall and weighing approximately 15,000 pounds (6,800 kg). Her crest peaks at 288 feet (88 meters) above the east front plaza of the U.S. Capitol.^[3] She is a female allegorical figure whose right hand holds the hilt of a sheathed sword while a laurel wreath of victory and the Shield of the United States are clasped in her left hand. Her chiton is secured by a brooch inscribed "U.S." and is partially covered by a heavy, Native American–style fringed blanket thrown over her left shoulder. She faces east^[4] towards the main entrance of the building and the rising Sun.^[5] She wears a military helmet adorned with stars and an eagle's head which is itself crowned by an umbrella-like crest of feathers. Although not actually called "Columbia", she shares many of her iconic characteristics.^[6][7] Freedom stands atop a cast-iron globe encircled with one of the national mottoes, E pluribus unum. The lower part of the base is decorated with fasces and wreaths. Ten bronze points tipped with platinum are attached to her headdress, shoulders, and shield for protection from lightning.

History

Design

A monumental statue for the top of the national Capitol appeared in architect Thomas U. Walter's original drawing for the new cast-iron dome, which was authorized in 1855. Walter's drawing showed the outline of a statue representing the Goddess of Liberty; Crawford proposed instead an allegorical figure of Freedom Triumphant in War and Peace.

Crawford was commissioned to design Freedom in 1854 and executed the plaster model for the statue in his studio in Rome. Mississippian senator and U.S. Secretary of War Jefferson Davis (who would later become President of the Confederacy) was in charge of the Capitol construction and its decorations. According to David Hackett Fischer in his book Liberty and Freedom, Crawford’s statue was…

…very close to Jefferson Davis’s ideas in every way but one…. Above the crown he [had] added a liberty cap, the old Roman symbol of an emancipated slave. It seemed a direct affront to a militant slaveholder, and Jefferson Davis exploded with rage. The northern sculptor and the southern slaveholder had already clashed over a liberty cap in the interior decoration of the Capitol.^[8]

Davis sent his aide, Captain Montgomery Meigs, with orders to remove the cap, saying that “its history renders it inappropriate to a people who were born free and would not be enslaved”.^[9] A military helmet, with an American eagle head and crest of feathers, replaced the cap in the sculpture's final version. (Today many casual observers take the statue, with its eagle and feathers, to be an American Indian.^[10])

Execution

Crawford died in 1857 before the full size plaster model left his studio. The model, packed into six crates, was shipped from Italy in a small sailing vessel in the spring of 1858. During the voyage the ship began to leak and stopped in Gibraltar for repairs. After leaving Gibraltar, the ship began leaking again to the point that it could go no farther than Bermuda, where the model was stored until other transportation could be arranged. Half of the crates finally arrived in New York City in December, but all sections were not in Washington, D.C. until late March 1859.

Beginning in 1860, the statue was cast in five main sections by Clark Mills, whose bronze foundry was located on the outskirts of Washington. Work was halted in 1861 because of the Civil War, but by the end of 1862 the statue was finished and temporarily displayed on the Capitol grounds. The cost of the statue, exclusive of installation, was $23,796.82.

While Freedom was being cast at Mills' foundry, the foreman in charge of the casting went on strike. Instead of paying him the higher wages he demanded, Mills turned the project over to Philip Reid, one of the slaves working at the facility. Reid presided over the rest of the casting and assembly of the figure.^[11] Late in 1863, construction of the dome was sufficiently advanced for the installation of the statue, which was hoisted by former slaves in sections and assembled atop the cast-iron pedestal. The final section, the figure's head and shoulders, was raised on December 2, 1863, to a salute of 35 guns answered by the guns of the 12 forts around Washington.^[12]

Restoration

The Statue of Freedom was removed from the dome for five months in 1993.

On May 9, 1993, after being in place almost 130 years, the statue was brought down from its pedestal by helicopter for restoration, also giving tourists a rare chance to see the statue up close. The work was needed because of extensive pitting and corrosion on the surface of the bronze and because of a crack and rusting on the cast-iron pedestal. The project was guided by the recommendations of a thorough conservation and engineering study conducted in 1991. The United States Capitol Preservation Commission provided $780,000 in privately raised funds, which covered all project costs. The work was performed by New Arts Foundry of Baltimore, Maryland.

The cast-iron pedestal was restored in place atop the dome. The metal was stripped of paint, and the wreaths and fasces were removed to ensure that they were thoroughly cleaned and coated. The crack was permanently repaired, and the entire pedestal was primed and painted with a color specially mixed to match the statue.

Statue of Freedom's plaster model cast now resides in the Capitol Visitor Center.

Restoration of the statue and the pedestal was completed in approximately four months. The Statue of Freedom was returned to its pedestal by helicopter on October 23, 1993, amid the celebration of the bicentennial of the U.S. Capitol. Since then, every 2–3 years, the statue undergoes two weeks of cleaning and recoating as necessary.

The plaster model of the statue, which had been in storage for 25 years, was reassembled and restored in the basement rotunda of the Russell Senate Office Building, where it was returned to permanent public display in January 1993. The plaster model was relocated to the Emancipation Hall of the Capitol Visitor Center, which provides more visitors access to look at the statue’s details.^[13]

Use of Freedom's image

The well-known Statue of Freedom has appeared on several official designs, akin to the Statue of Liberty. The head of the statue is depicted on a postage stamp (1923, USA Scott No. 573), which was re-issued in 2006. The entire statue is depicted on a stamp commemorating the 150th anniversary of Washington, D.C. (1950, USA Scott No. 989).

It can also be found on the reverse side of the Iraq Campaign Medal decoration authorized to be awarded to members of the U.S. military who deploy to Iraq in direct support of Operation Iraqi Freedom. The civilian version of the Global War on Terrorism Expeditionary Medal, known as the Global War on Terrorism Civilian Service Medal, also depicts the statue on the obverse (front face) of the medal.

• 

  USA $5 postage, 1923.

• 

  Global War on Terrorism Civilian Service Medal, 2003.

• 

  Iraq Campaign Medal, 2004.

• 

  Series 1862 $5 note

References

•  This article incorporates public domain material from websites or documents of the The Architect of the Capitol.

External links

• Aoc.gov: The Statue of Freedom webpage — by the Architect of the Capitol.

Wikimedia Commons has media related to Statue of Freedom (United States Capitol).

Coordinates: 38°53′24″N 77°0′32.4″W / 38.89000°N 77.009000°W / 38.89000; -77.009000