Standard gravity
The standard acceleration due to gravity (standard acceleration of free fall), sometimes abbreviated as standard gravity, usually denoted by ɡ0 or ɡn, is the nominal gravitational acceleration of an object in a vacuum near the surface of the Earth. It is defined by standard as 9.80665 m/s2, which is exactly 35.30394 (km/h)/s (about 32.174 ft/s2, or 21.937 mph/s). This value was established by the 3rd CGPM (1901, CR 70) and used to define the standard weight of an object as the product of its mass and this nominal acceleration.[1][2] The acceleration of a body near the surface of the Earth is due to the combined effects of gravity and centrifugal acceleration from rotation of the Earth (but which is small enough to be neglected for most purposes); the total (the apparent gravity) is about 0.5 percent greater at the poles than at the equator.
Although the symbol ɡ is sometimes used for standard gravity, ɡ (without a suffix) can also mean the local acceleration due to local gravity and centrifugal acceleration, which varies depending on one's position on Earth (see Earth's gravity). The symbol ɡ should not be confused with G, the gravitational constant, or g, the symbol for gram. The ɡ is also used as a unit for any form of acceleration, with the value defined as above; see g-force.
The value of ɡ0 defined above is a nominal midrange value on Earth, originally based on the acceleration of a body in free fall at sea level at a geodetic latitude of 45°. Although the actual acceleration of free fall on Earth varies according to location, the above standard figure is always used for metrological purposes. (The actual average sea-level acceleration on Earth is slightly less.)
Conversions
| Base unit | Gal (cm/s2) | ft/s2 | m/s2 | standard gravity (g0) |
|---|---|---|---|---|
| cm/s2 | 1 | 0.0328084 | 0.01 | 0.00101972 |
| ft/s2 | 30.4800 | 1 | 0.304800 | 0.0310810 |
| m/s2 | 100 | 3.28084 | 1 | 0.101972 |
| g0 | 980.665 | 32.1740 | 9.80665 | 1 |
See also
References
- ↑ The international system of units (SI) (PDF) (2008 ed.). United States Department of Commerce, NIST Special Publication 330. pp. 29 & 57.
- ↑ The International System of Units (SI) (PDF) (8th ed.). Bureau international des poids et mesures. 2006. pp. 142–143. ISBN 92-822-2213-6.