Scott Flying Squirrel

Scott Flying Squirrel
Manufacturer The Scott Motorcycle Company
Production 19261940
Engine 596 cc (36.4 cu in) water-cooled two-stroke twin
Top speed 70 mph (110 km/h)
Power 34 bhp (25 kW) @ 5,200 rpm
Transmission Three speed with hand gear change
Wheelbase 55.5 inches (141 cm)
Weight 325 lb (147 kg) (dry)

The Scott Flying Squirrel was a motorcycle made by The Scott Motorcycle Company between 1926 and the outbreak of World War II.[1]

Development

Side view of Scott Flying Squirrel taken at the Ace Cafe

The Squirrel name was used for Scott motorcycles since 1921 but with the death of the founder Alfred Angas Scott in 1923 the unorthodox Scott two-stroke motorcycles began to become more conventional. Development of the three-speed Scott Flying Squirrel began in 1922 as the company was in severe debt and faced receivership. Launched at the 1926 Earls Court motorcycle show, the Flying Squirrel was expensive - nearly twice the cost of a sporting four-stroke motorcycle of the time.[1] The unique water-cooled circulation used a convection method known as the thermosyphon system. The bottom end block was painted either green or red for racing or road respectively and featured a centrally positioned flywheel, twin inboard main bearings, overhung crankpins and doors to enable ease of access to the engine. The redesigned three-speed gearbox, multi-plate clutch and the repositioned magneto were all significant improvements.[2]

1932 Squirrel

In 1929 Scott achieved third place in the Isle of Man TT and launched a road going TT Replica Flying Squirrel. Following cost cutting the factory also launched a basic touring model in 1929 for under £70. Financial problems continued, however, and in 1931 Scott were unable to enter the TT or the Earls Court show. A three-cylinder prototype was developed but Scotts lacked the resources to develop it and on the outbreak of World War II production ended.[1]

Between 1935 and 1938 the factory at Shipley in Yorkshire produced the B2592 air-cooled Aero engine, based on the Scott Flying Squirrel motorcycle unit.[3] A 25 hp (19 kW) version was also specifically developed to power the notoriously dangerous Flying Flea aircraft.[4] In 1950 the rights were bought by the Birmingham based Aerco Company and in 1956 they produced what are known as the Birimingham Scotts.[1]

In the late 1970s, Silk Engineering produced the Silk 700S, which comprised an uprated Scott engine fitted into a modern Egli-type frame made by Spondon Engineering.

References

  1. 1.0 1.1 1.2 1.3 Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN 1-86147-136-X.
  2. "Scott Flying Squirrel review". Retrieved 2008-12-26.
  3. "Scott "Flying Squirrel" aero engine". Retrieved 2008-12-26.
  4. "Britain's Flea Craze". Archived from the original on 2009-07-23. Retrieved 2008-12-26.

External links