Saxon X V

Saxon X V
DRG Class 14.2
Number(s): 175–176, 183–195
DRG: 14 201–215
Quantity: 15
Manufacturer: Sächsische Maschinenfabrik, Chemnitz
Year(s) of manufacture: 1900 (prototypes)
1902/03 (production)
Retired: 1926
Wheel arrangement: 4-4-2
Axle arrangement: 2'B1' n4v
Gauge: 1,435 mm
Length over buffers: 20,353 mm
Empty weight: 61.9 t / 62.0 t
Service weight: 69.3 t / 69.4 t
Adhesive weight: 32.0 t / 31.4 t
Axle load: 16.0 t / 15.7 t
Top speed: 120 / 100 km/h
Indicated Power: 1,060 PSi
Driving wheel diameter: 1,980 mm
Leading wheel diameter: 1,065 mm
Trailing wheel diameter: 1,240 mm
Valve gear: Walschaerts (Heusinger)/Joy
LP cylinder bore: 555 mm
HP cylinder bore: 350 mm
Piston stroke: 660 mm
Boiler Overpressure: 15 bar
No. of heating tubes: 222
Heating tube length: 4,700 mm
Grate area: 2.41 m² / 2.38 m²
Radiative heating area: 13.7 m² / 13.3 m²
Tube heating area: 151.5 m² / 147.5 m²
Evaporative heating area: 165.2 m² / 160.8 m²
Tender: sä 2'2' T 18
sä 2'2' T 19.5
sä 2'2' T 21
Brakes: Westinghouse compressed-air brake
Tachometer: Hausshälter

The Royal Saxon State Railways designated four-coupled, Atlantic (4-4-2) express locomotives as Class X \textstyle \mathfrak{V} and the Deutsche Reichsbahn subsequently grouped these locomotives into DRG Class 14.2 in 1925.

History

In 1900 the Sächsische Maschinenfabrik engineering works built the first two express locomotives of the new four-coupled, Atlantics with a four-cylinder compound engine. One of the locomotives was displayed at the Paris World Exhibition in 1900 and was awarded the Grand Prix.

The Royal Saxon State Railways took over the two prize-winning locomotives and procured another 13 up to 1903 that differed from the prototypes, particularly in terms of the diameter of the carrying axles. They were the largest and most powerful locomotives in Saxony to that point. The X V was employed on express train duties on the plains where its riding qualities and economy were impressive.

In 1920 the Deutsche Reichsbahn took over all 15 engines and gave them the new numbers 14 201–215 in 1925. They were retired by 1926.

Technical features

The locomotives had a boiler with a Belpaire firebox, which was located between the frame sides. Two injectors provided the boiler feedwater.

The steam engine was designed as a de Glehn four-cylinder compound. The outer high-pressure cylinders drove the second coupled axle, whilst the inside low-pressure cylinders drove the first. The motion for the engine was a Walschaerts valve gear on the outer cylinders and a Joy valve gear on the inner ones.

Braking for locomotive and train was provided by a Westinghouse compressed-air brake. On the two prototypes the air pump was on the right, on the remaining locomotives it was installed on the left hand side.

The coupled axles were fixed to the frame. The leading bogie was an Erfurt design, the trailing axle was an Adams axle.

The locomotives were coupled with Saxon tenders of classes sä 2'2' T 18, sä 2'2' T 19.5 and sä 2'2' T 21.

Service

The locomotives were only in express train service on the Leipzig–Dresden railway for a few years before the four-coupled engines proved too underpowered for the steadily climbing train loads. The X V was then deployed mainly on the passenger trains from Dresden to Bodenbach, Leipzig and Zittau until its retirement.

Sources

See also

External links