SER R class
SER R class | |
---|---|
Type and origin | |
Power type | Steam |
Designer | James Stirling |
Builder | Ashford Works |
Build date | 1888–1898 |
Total produced | 25 |
Specifications | |
Configuration | 0-6-0T |
UIC classification | C n2t |
Gauge | 4 ft 8 1⁄2 in (1,435 mm) |
Career | |
Operator(s) |
|
Class | R |
Withdrawn | 1931–1943 |
Disposition | 13 rebuilt as R1 class (see below); all scrapped |
The SER R class was a class of 0-6-0T locomotives on the South Eastern Railway.
History
For many years the South Eastern Railway (SER) had possessed very few locomotives designed for shunting. When trains were to be shunted, this was usually carried out any locomotive which happened to be idle at the time, which was often unsuitable; and sometimes this caused delays to other trains which should have been run using the commandeered locomotive.[1]
Several other railways favoured the 0-6-0T wheel arrangement for shunting, and so in 1887 it was decided to introduce a class of 0-6-0T locomotives specifically for shunting and for hauling local goods trains.[1] The R class locomotives were designed by James Stirling as a new class, and 25 were built at Ashford Works between 1888 and 1898.[2][3] As was typical of Stirling's designs, several components were shared with existing designs; the domeless boilers were of the same type as was fitted to the his O class 0-6-0 and Q class 0-4-4T.[4]
Their SER numbers were scattered between 10 and 174, and in a continuous block from 335 to 342.[3] These numbers were retained under the South Eastern and Chatham Railway, although from 1900 the livery changed from black to green.[5]
Year | Quantity | SER Nos. |
---|---|---|
1888 | 4 | 335–338 |
1889 | 4 | 339–342 |
1890 | 3 | 10, 77, 147 |
1892 | 6 | 124, 128, 152–154, 174 |
1895 | 4 | 47, 125–127 |
1898 | 4 | 69, 70, 107, 155 |
R1 class
SECR R1 class | |
---|---|
Two R1 locomotives 1069 and 1147 at Ashford 1946. These have been cut down to operate on the restrictive Canterbury & Whitstable line | |
Type and origin | |
Only differences from R class are shown | |
Power type | Steam |
Rebuild date | 1910–1922 |
Number rebuilt | 13 |
Specifications | |
Career | |
Operator(s) |
|
Class | SECR/SR: R1 |
Withdrawn | 1949–1960 |
Disposition | All scrapped |
Between 1910 and 1922,[6] 13 of the SER R class 0-6-0T were rebuilt by the SECR with Wainwright-design domed boilers of the same type as were used on the SECR H class 0-4-4T.[7] These rebuilds were classified R1, but their capabilities and duties did not change substantially.
Year | Quantity | SECR Nos. |
---|---|---|
1910 | 1 | 69 |
1911 | 1 | 339 |
1912 | 2 | 147, 154 |
1913 | 4 | 10, 47, 128, 340 |
1914 | 3 | 107, 127, 174 |
1915 | 1 | 335 |
1922 | 1 | 337 |
Renumbering
Many of the locomotives were renumbered up to three times: from 1924 the Southern Railway (SR) applied the prefix "A", ie A10 etc, the work being completed in 1927;[8] from 1931 the SR dropped the "A" and increased the numbers by 1000 (ie 1010 etc.); and from 1948, under British Railways, the numbers were further increased by 30000, becoming 31010 etc.
Withdrawal
One R class locomotive (no. 341) was withdrawn in 1914 due to accident damage.[9] The other 11 locomotives which had not been rebuilt to the R1 class were withdrawn between 1931 and 1943.[10] Of the 13 R1 class rebuilds, one was withdrawn in 1949, two in 1955, three in 1958 and five in 1959; after August 1959, only nos. 31047 and 31337 were left, and these were withdrawn in March and February 1960 respectively.[11]
Models
The Hornby Dublo range of 00 gauge model railways had been launched by Meccano Ltd in 1938 using a three-rail system to power the electric motors of the locomotives.[12] After World War II, several of their rivals chose a two-rail system and by 1957 Hornby Dublo began to lose sales.[13] Accordingly, they decided to develop a two-rail system, and this was launched in 1959. Among the new items designed especially for the two-rail launch was a model of the SECR R1 class 0-6-0T;[14] this was moulded in polystyrene, which was coloured either black (with running number 31337) or green (as number 31340), both carrying the contemporary BR emblem;[15] it has been stated that the two running numbers were carefully chosen to match the numbers of the last two in service,[16] but in fact at the time of the withdrawal of 31340, there were still six others in service.[3] They were announced in Meccano Magazine in September 1960,[17] and remained in production until the collapse of the Meccano group in 1964.[17][18]
Notes
- ↑ 1.0 1.1 Bradley 1985, p. 193.
- ↑ Bradley 1985, pp. 193–194.
- ↑ 3.0 3.1 3.2 Bradley 1985, pp. 203–204.
- ↑ Bradley 1985, pp. 194, 197.
- ↑ Bradley 1985, p. 196.
- ↑ Bradley 1985, pp. 203-204.
- ↑ Bradley 1985, p. 197.
- ↑ Bradley 1985, p. 199.
- ↑ Bradley 1985, pp. 198,204.
- ↑ Bradley 1985, p. 204.
- ↑ Bradley 1985, pp. 202-204.
- ↑ Foster & Ellis 1993, p. 17.
- ↑ Foster & Ellis 1993, p. 46.
- ↑ Foster & Ellis 1993, p. 55.
- ↑ Foster & Ellis 1993, pp. 130, 133.
- ↑ Foster & Ellis 1993, p. 130.
- ↑ 17.0 17.1 Foster & Ellis 1993, p. 339.
- ↑ Foster & Ellis 1993, p. 133.
References
- Bradley, D.L. (September 1985) [1963]. The Locomotive History of the South Eastern Railway (2nd ed.). London: RCTS. ISBN 0-901115-48-7.
- Foster, Michael; Ellis, Alan F. (1993) [1980]. Vol. 3: Hornby Dublo Trains 1938-1964. The Hornby Companion Series. London: New Cavendish Books. ISBN 0-904568-18-0.
|