Royton Ring Mill, Royton

Royton Ring Mill

Royton Ring Mill
Location within Greater Manchester
Cotton
Spinning (ring & doubling mill)
Location Royton
Further ownership
Coordinates 53°33′17″N 2°07′09″W / 53.5546°N 2.1191°W
Construction
Built 1908, ex.1912
Design team
Architecture Firm P.S.Stott
Power
Engine maker Urmson & Thompson
Engine type cross compound engine
Valve Gear Corliss valves
rpm 67
Flywheel diameter 24ft
Transmission type rope
No. of ropes 36
Boiler configuration
Pressure 160psi
Doublers 6,400 spindles
References
[1] [2]

Royton Ring Mill was a cotton mill in Royton, Greater Manchester. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

Location

Royton is a town within the Metropolitan Borough of Oldham, in Greater Manchester, England.[3] It lies by the source of the River Irk, on undulating land at the foothills of the Pennines, 1.7 miles (2.7 km) north-northwest of Oldham, 3.2 miles (5.1 km) south-southeast of Rochdale and 7.6 miles (12.2 km) northeast of the city of Manchester. Royton is not situated on any canal, but the Manchester, Oldham, and Royton railway(which left the Oldham Loop Line at Royton Junction railway station) and a goods yard was constructed in the 1860s, allowing improved transportation of textile goods and raw materials to and from the township.[4]

History

Historically a part of Lancashire, Royton during the Middle Ages, formed a small township centred on Royton Hall. A settlement expanded outwards from the hall which, by as late as 1780, "contained only a few straggling and mean-built cottages".[5] Farming was the main industry of this rural area, with locals supplementing their incomes by hand-loom woollen weaving in the domestic system.

Royton has the distinction of being the first town in Lancashire where a water powered cotton mill was built.Thorp Mill, Royton was built by Ralph Taylor at Thorp Clough in 1764.[6] [7][8] The construction of more mills followed, which initiated a process of urbanisation and socioeconomic transformation in the region; the population moved away from farming, adopting employment in the factory system.[9] The introduction of which led to a tenfold increase of Royton's population in less than a century; from 260 in 1714 to 2,719 in 1810.[9] Thus, the introduction of textile manufacture during the Industrial Revolution facilitated a process of unplanned urbanisation in the area, and by the mid-19th century Royton had emerged as a mill town.

Royton's damp climate provided the ideal conditions for cotton spinning to be carried out without the cotton drying and breaking. By 1832, there were 12 steam powered mills in Royton, of which its former hamlets had begun to agglomerate as a town around the cotton factories, a number of small coalpits and new turnpike road from Oldham to Rochdale, which passed through the town centre.[4] The Manchester, Oldham, and Royton railway and a goods yard was constructed in the 1860s, allowing improved transportation of textile goods and raw materials to and from the township.[4] Neighbouring Oldham (which by the 1870s had emerged of the largest and most productive mill town in the world)[10] had begun to encroach upon Royton's southern boundary, forming a continuous urban cotton-spinning district. The demand for cheap cotton goods from this area prompted the flotation of cotton spinning companies; the investment was followed by the construction of 22 new cotton mills in Royton.[11] Together with Oldham, at its peak the area was responsible for 13% of the world's cotton production.[12]

The industry peaked in 1912 when it produced 8 billion yards of cloth. The Great War of 1914–18 halted the supply of raw cotton, and the British government encouraged its colonies to build mills to spin and weave cotton. The war over, Lancashire never regained its markets. The independent mills were struggling. The Bank of England set up the Lancashire Cotton Corporation in 1929 to attempt to rationalise and save the industry.[13] Royton Ring Mill, Royton was one of 104 mills bought by the LCC, and one of the 53 mills that survived through to 1950.

As imports of cheaper foreign yarns increased during the mid-20th century, Royton's textile sector declined gradually to a halt; cotton spinning reduced in the 1960s and 1970s, and by the early 1980s only four mills were operational.[14] In spite of efforts to increase the efficiency and competitiveness of its production, the last cotton was spun in the town in 1998.[12][14]

Today, fewer than a dozen mills are still standing in Royton, the majority of which are used for light engineering or as distribution centres.[14] Despite an economic depression brought about by the demise of cotton spinning, Royton's population has continued to grow as a result of intensive housing redevelopment which has modernised its former Edwardian districts.[14]

Architecture

This was a P.S.Stott mill constructed in 1908.

Power

Driven by a 1700 hp cross compound engine by Urmson & Thompson, 1908 similar to the one in Mars Mill, Castleton. It was steamed at 160psi. The cylinders, 29"HP, 59"LP, had a 5-foot stroke. There were Corliss valves on both cylinders. The air pump was driven from LP tail rod with support guides on LP only. The 24-foot flywheel ran at 67 rpm and supported 36 ropes. [15]

Equipment

In 1915 it had 64,176 ring and 6400 doubling spindles.

Later extensions

Usage

Owners

See also

References

  1. LCC 1951
  2. Gurr & Hunt 1985, p. 90
  3. Greater Manchester Gazetteer, Greater Manchester County Record Office, Places names – O to R, archived from the original on 18 July 2011, retrieved 17 June 2008
  4. 4.0 4.1 4.2 Stott 1994, p. 7.
  5. Brownbill & Farrer 1911
  6. Oldham Council, Oldham's Economic Profile – Innovation and Technology, oldham.gov.uk, retrieved 20 July 2008
  7. Manchester City Council, Oldham Towns; Royton, spinningtheweb.org.uk, retrieved 5 January 2007
  8. Stott 1994, p. 10.
  9. 9.0 9.1 Stott 1994, p. 6.
  10. McNeil & Nevell 2000, p. 29.
  11. Stott 1994, p. 8.
  12. 12.0 12.1 Heritage; The History of Oldham; Oldham History, visitoldham.co.uk, archived from the original on 4 June 2008, retrieved 26 July 2008
  13. Dunkerley 2009
  14. 14.0 14.1 14.2 14.3 Stott 1994, p. 9.
  15. Roberts 1921

Bibliography

  • LCC (1951). The mills and organisation of the Lancashire Cotton Corporation Limited. Blackfriars House, Manchester: Lancashire Cotton Corporation Limited.
  • Roberts, A S (1921), "Arthur Robert's Engine List", Arthur Roberts Black Book. (One guy from Barlick-Book Transcription), retrieved 11 January 2009
  • Brownbill, John; Farrer, William (1911), A History of the County of Lancaster: Volume 5, Victoria County History, ISBN 978-0-7129-1055-2
  • Frangopulo, N. J. (1977), Tradition in Action: The Historical Evolution of the Greater Manchester County, Wakefield: EP, ISBN 0-7158-1203-3
  • Gurr, Duncan; Hunt, Julian (1985). The Cotton Mills of Oldham. Oldham Education & Leisure. ISBN 0-902809-46-6.
  • McNeil, R & Nevell, M (2000), A Guide to the Industrial Archaeology of Greater Manchester, Association for Industrial Archaeology, ISBN 0-9528930-3-7
  • Stott, Frances (1994), Looking Back at Royton, Oldham: Oldham Arts and Heritage, ISBN 0-902809-29-6

External links

Wikimedia Commons has media related to Textile mills in Oldham.