Roland MC-303

MC-303
Manufactured by Roland
Dates 19961997
Price £565 UK, $699 US
Technical specifications
Polyphony 24-note
Timbrality 8-part
Synthesis type Sample-based synthesis (rompler)
Memory 448 preset sounds, 12 drum kits
Effects reverb/delay, chorus/flanger
Input/output
Keyboard No
External control MIDI in/out

The Roland MC-303 is the first of a series of musical instruments known as a Groovebox. It combines a simple sound module with a sequencer to record and store notation, along with controls aimed at encouraging the musician to improvise the music while it is playing. Despite the number in its name and the hype it received at its launch, the MC-303 has more in common with other MC prefixed synthesizers (such as the Roland MC-202), which contain built-in sequencers, than it does with the famous Roland TB-303. As the first Groovebox, the MC-303 was the first in a line of inexpensive products specifically targeted towards house DJs and amateur home musicians rather than professional producers. It was superseded by the Roland MC-505. It is the predecessor to the Roland D2, Roland MC-307, Roland MC-909 and the Roland MC-808.

Features

The key features of the MC-303 are:

Synthesizer/Sound Module

The synthesizer built into the Roland MC-303 is a rompler which contains sounds largely drawn from classic Roland synths and drum machines such as the TB-303, TR-808 and TR-909 along with the Juno series and various other dance themed sounds such as pads, pianos, strings and vinyl scratches. The sounds can be manipulated with a low-pass filter, various modulation capabilities and some simple DSP effects. It doesn't have a Sampler, although the instruction book contains instructions for getting it to control an external sampler.

Sequencer

The most important part of the MC-303 is its built-in pattern based 8 track sequencer. Each pattern can contain up to 32 bars. It can record and send MIDI data via the MIDI jacks on the rear panel, enabling its internal sequencer to control other sound modules, or its internal sound module to be controlled by an external sequencer. Although communication with other devices is possible, the main advantage to the MC-303 with its small form factor and all-in-one design is the ability to use it as a self-contained studio, albeit an amateur one. Featuring a micro-keyboard that can also be used as a drum sequencer, the MC-303 imitates the handling as well as the look and feel of other famous Roland synthesizers and drum machines such as the MC-202, TB-303, TR-808 and TR-909.

Supply problems

Roland apparently underestimated the demand for the new module with the result that many did not receive the modules until months after its launch.

Criticisms

One criticism made of the machine in various reviews, including the August 1996 issue of Sound on Sound magazine,[1] was that the sound module was essentially limited to only playing built-in preset sounds, discouraging innovation. From a more technical perspective, a major concern was that any knob tweaks made during real time recording were not transmitted via MIDI. The number of preset patterns (mostly aimed for Trance and Techno music) outweighed the amount of programmable user patterns which also discouraged innovation. Roland responded in part to these criticisms in its later grooveboxes by solving the MIDI problem, increasing the synthesis capabilities & user pattern storage and adding a sampler section.

Software ROM Chip Update (not in Roland information)

Check your MC-303 ROM Chip Update: 'SHIFT'+'SCALE'+'R (BD)' Circulated ROM BIOS Versions: V1.00(1996); V1.01; V1.02 and V1.03(1997)*

References

  1. Derek Johnson; Debbie Poyser (1996-08). "Hip Replacement". SOS Publications Group. Retrieved 2009-01-31. Check date values in: |date= (help)

External links

MC-303 PDF Manual Links:

Other Links: