Rheonomous

A mechanical system is rheonomous if its equations of constraints contain the time as an explicit variable.[1][2] Such constraints are called rheonomic constraints. The opposite of rheonomous is scleronomous.[1][2]

Example: simple 2D pendulum

As shown at right, a simple pendulum is a system composed of a weight and a string. The string is attached at the top end to a pivot and at the bottom end to a weight. Being inextensible, the string has a constant length. Therefore this system is scleronomous; it obeys the scleronomic constraint

\sqrt{x^2+y^2} - L=0\,\!,

where (x,\ y)\,\! is the position of the weight and L\,\! the length of the string.

The situation changes if the pivot point is moving, e.g. undergoing a simple harmonic motion

x_t=x_0\cos\omega t\,\!,

where x_0\,\! is the amplitude, \omega\,\! the angular frequency, and t\,\! time.

Although the top end of the string is not fixed, the length of this inextensible string is still a constant. The distance between the top end and the weight must stay the same. Therefore this system is rheonomous; it obeys the rheonomic constraint

\sqrt{(x - x_0\cos\omega t)^2+y^2} - L=0\,\!.

See also

References

  1. ↑ 1.0 1.1 Goldstein, Herbert (1980). Classical Mechanics (2nd ed.). United States of America: Addison Wesley. p. 12. ISBN 0-201-02918-9. Constraints are further classified according as the equations of constraint contain the time as an explicit variable (rheonomous) or are not explicitly dependent on time (scleronomous).
  2. ↑ 2.0 2.1 Spiegel, Murray R. (1994). Theory and Problems of THEORETICAL MECHANICS with an Introduction to Lagrange's Equations and Hamiltonian Theory. Schaum's Outline Series. McGraw Hill. p. 283. ISBN 0-07-060232-8. In many mechanical systems of importance the time t does not enter explicitly in the equations (2) or (3). Such systems are sometimes called scleronomic. In others, as for example those involving moving constraints, the time t does enter explicitly. Such systems are called rheonomic.