Retreat mining

Retreat mining is a term used to reference the final phase of an underground mining technique known as room and pillar mining. This involves excavating a room or chamber while leaving behind pillars of material for support. This excavation is carried out in a pattern advancing away from the entrance of a mine. Once a deposit has been exhausted using this method, the pillars that were left behind initially are removed, or "pulled", retreating back towards the mine's entrance. After the pillars are removed, the roof (or back) is allowed to collapse behind the mining area. Pillar removal must occur in a very precise order in order to reduce the risks to workers, due to the high stresses placed on the remaining pillars by the abutment stresses of the caving ground.

Retreat mining is a particularly dangerous form of mining: according to the Mine Safety and Health Administration (MSHA), pillar recovery mining has been historically responsible for 25% of American coal mining deaths caused by failures of the roof or walls, even though it represents only 10% of the coal mining industry.[1]

Retreat mining is the term commonly referred to as the mining method employed by the Crandall Canyon Mine and is believed, by some, to be a factor in the August 2007 collapse which trapped six miners. On November 21, 2007, the mine was sealed, entombing the deceased miners. The bureau of land management says retreat mining was being used. Robert E. Murray, CEO of Murray Energy (owner of the mine), says the technique was not being used at Crandall Canyon.[2]

See also

References

  1. ↑ Mark, Chris (2010). "Deep Cover Pillar Recovery in the US". Retrieved 13 July 2012.
  2. ↑ Borenstein, Seth; Talhelm, Jennifer; Vergakis, Brock (August 6, 2007). "Deadly Mining Method Often Used". The Washington Post. Associated Press. Retrieved 2007-08-07.

External links