Redscale

For a plant with this common name, see Atriplex rosea.
The same scene shot with redscale film at 7 different exposure settings. Scroll up and down swiftly with only the mouse scroll wheel (it scrolls in notches) to see an intriguing effect.

Redscale is the name given to a technique of shooting photographic film where the film is exposed from the wrong side, i.e. the emulsion is exposed through the base of the film. Normally, this is done by winding the film upside-down into an empty film canister. The name "redscale" comes because there is a strong color shift to red due to the red-sensitive layer of the film being exposed first, rather than last [the red layer is normally the bottom layer in C-41 (color print) film]. All layers are sensitive to blue light, so normally the blue layer is on top, followed by a filter. In this technique, blue light exposes the layers containing red and green dyes, but the layer containing blue dye is left unexposed due to the filter. E-6 (color slide) film has also been used for this technique.

Depending on the type of film used, the resulting colors seem to range from maroon, to red, to orange, to yellow.

The technique seems to have been discovered accidentally. Some people shooting large format color film would load the individual negatives backwards. This phenomenon is likely as old as color film itself. However, it has only recently gained popularity as an effect intentionally sought.

The technique is considered by some to be part of the lo-fi photography movement, along with use of toy cameras, pinhole cameras, instant cameras, and sprocket hole photography.

The Lomographic Society International has produced a pre-loaded redscale 35mm film, that will fit in all standard 35mm cameras. Because of the nature of the film, shots need to be over exposed by one to three stops to achieve correct exposure on developing.

The amount of over exposure determines the intensity of the red. When redscale film is shot at the posted ASA the resulting photos are almost all red, over exposure allows light to reach the less sensitive green and blue layers of the film. Exposures of 5 stops or more over posted speed can result in the red layer washing out completely and the resulting images appearing mostly yellow.

See also

External links

Wikimedia Commons has media related to Redscale photographs.