Red beds

Cathedral Rock near Sedona, made of Permian redbeds.
Red butte, Selja Gorges, Tunisia
Redbeds of the Permo-Triassic Spearfish formation surround Devils Tower National Monument

Red beds (or redbeds) are sedimentary rocks, which typically consist of sandstone, siltstone, and shale that are predominantly red in color due to the presence of ferric oxides. Frequently, these red-colored sedimentary strata locally contain thin beds of conglomerate, marl, limestone, or some combination of these sedimentary rocks. The ferric oxides, which are responsible for the red color of red beds, typically occur as a coating on the grains of sediments comprising red beds. Classic examples of red beds are the Permian and Triassic strata of the western United States and the Devonian Old Red Sandstone facies of Europe.[1][2]

Primary red beds

Krynine (1950) suggested that the red beds were primarily formed by the erosion and redeposition of red soils or older red beds. A fundamental problem with this hypothesis is the relative scarcity of Permian red colored source sediments to the south of Cheshire. Van Houten (1961) developed the idea to include the in situ (early diagenetic) reddening of the sediment by the dehydration of brown or drab colored ferric hydroxides. These ferric hydroxides commonly include goethite (FeO-OH) and so called "amorphous ferric hydroxide" or limonite. In fact, much of this material may be the mineral ferrihydrite (Fe2O3 H2O).

This dehydration or "aging" process is now known to be intimately associated with pedogenesis in alluvial floodplains and desert environments. Berner (1969) showed that goethite (ferric hydroxide) is normally unstable relative to hematite and in the absence of water or at elevated temperature will readily dehydrate according to the reaction:

2FeOOH (goethite)→ Fe2O3 (hematite) +H2O

The Gibbs Free Energy for the reaction goethite → hematite (at 250 °C) is -2.76kJ/mol and Langmuir (1971) showed that G becomes increasingly negative with smaller particle size. Thus detrital ferric hydroxides including goethite and ferrihydrite will spontaneously transform into red colored hematite pigment with time. This process not only accounts for the progressive reddening of alluvium but also the fact older desert dune sands are more intensely reddened than their younger equivalents.

Diagenetic red beds

The formation of red beds during burial diagenesis was clearly described by Walker (1967) and Walker et al. (1978). The key to this mechanism is the intrastratal alteration of ferromagnesian silicates by oxygenated groundwaters during burial. Walker’s studies show that the hydrolysis of hornblende and other iron-bearing detritus follows Goldich dissolution series. This is controlled by the Gibbs Free Energy of the particular reaction. For example, the most easily altered material would be olivine: e.g.

Fe2SiO4 (fayalite) + O2 → Fe2O3 (hematite) + SiO2 (quartz) with E = -27.53kJ/mol

A key feature of this process, and exemplified by the reaction, is the production of a suite of by products which are precipitated as authigenic phases. These include mixed layer clays (illite – montmorillonite), quartz, potassium feldspar and carbonates as well as the pigmentary ferric oxides. Reddening progresses as the diagenetic alteration becomes more advanced and is thus a time dependent mechanism. The other implication is that reddening of this type is not specific to a particular depositional environment. However, the favourable conditions for diagenetic red bed formation i.e. positive Eh and neutral-alkaline pH are most commonly found in hot, semi-arid areas, and this is why red beds are traditionally associated with such climates.

Secondary red beds

Secondary red beds are characterized by irregular color zonation, often related to sub-unconformity weathering profiles. The color boundaries may cross-cut lithological contacts and show more intense reddening adjacent to unconformities. Johnson et al. (1997) have also showed how secondary reddening phases might be superimposed on earlier formed primary red beds in the Carboniferous of the southern North Sea. The general conditions leading to post-diagenetic alteration have been described by Mücke (1994). Important reactions include pyrite oxidation:

3O2 + 4FeS2→ Fe2O3 (hematite) + 8S E = -789 kJ/mol

and siderite oxidation:

O2 + 4FeCO3 → 2Fe2O3 (hematite) + 4CO2 E = –346 kJ/mol

Secondary red beds formed in this way are an excellent example of telodiagenesis. They are linked to the uplift, erosion and surface weathering of previously deposited sediments and require conditions similar to primary and diagenetic red beds for their formation.


Panorama of the Flaming Cliffs of Mongolia


See also

References

  1. ↑ U.S. Bureau of Mines Staff (1996) Dictionary of Mining, Mineral, & Related Terms. Report SP-96-1, U.S. Department of Interior, U.S. Bureau of Mines, Washington, D.C.
  2. ↑ Neuendorf, K.K.E., J.P. Mehl, Jr., and J.A. Jackson, J.A., eds. (2005) Glossary of Geology (5th ed.). Alexandria, Virginia, American Geological Institute. 779 pp. ISBN 0-922152-76-4

External links