Rancidification

Rancidification, the product of which can be described as rancidity, is the process which causes a substance to become rancid, that is, having a rank, unpleasant smell or taste. Specifically, it is the hydrolysis and/or autoxidation of fats into short-chain aldehydes and ketones which are objectionable in taste and odor.[1] When these processes occur in food, undesirable odors and flavors can result. In some cases, however, the flavors can be desirable (as in aged cheeses).[2] In processed meats, these flavors are collectively known as warmed-over flavor. Rancidification can also detract from the nutritional value of food, and some vitamins are highly sensitive to degradation.[3] Akin to rancidification, oxidative degradation also occurs in other hydrocarbons, e.g. lubricating oils, fuels, and mechanical cutting fluids.[4]

Rancidification pathways

Three pathways for rancidification are recognized:[5]

Hydrolytic rancidity

Hydrolytic rancidity refers to the odor that develops when triglycerides are hydrolyzed and free fatty acids are released. This reaction of lipid with water sometimes requires a catalyst, but results in the formation of free fatty acids and salts of free fatty acids. In particular, short-chain fatty acids, such as common butter fats, are odorous. Rancidity in foods may be very slight, indicated by a loss of freshness to very severe, indicated by objectionable odors and/or flavors. Slight degrees of rancidity are much more common in foods than severe rancidity, yet slight rancidity is a much more practical concern. A slight degree of rancidity may not be objectionable to consumers, but products which do not seem fresh will not attract repeat purchases. If customers do not return to a product, the long-term effects of a slight degree of rancidity can be economically serious.

Oxidative rancidity

Oxidative rancidity is associated with the degradation by oxygen in the air. Via a free radical process, the double bonds of an unsaturated fatty acid can undergo cleavage, releasing volatile aldehydes and ketones. Oxidation primarily occurs with unsaturated fats. For example, even though meat is held under refrigeration or in a frozen state, the poly-unsaturated fat will continue to oxidize and slowly become rancid. The fat oxidation process, potentially resulting in rancidity, begins immediately after the animal is slaughtered and the muscle, intra-muscular, inter-muscular and surface fat becomes exposed to oxygen of the air. This chemical process continues during frozen storage, though more slowly at lower temperature. The process can be suppressed by the exclusion of oxygen or by the addition of antioxidants. Thus, airtight packaging will slow rancidity development.

Microbial rancidity

Microbial rancidity refers to a process in which microorganisms, such as bacteria or molds, use their enzymes such as lipases to break down fat. This pathway can be prevented by sterilization.

Health effects

Consuming rancid food products is unlikely to cause immediate illness or harm. Rancidification can reduce the nutritional value of food, and some vitamins are highly sensitive to degradation.[3] In addition, rancidification can produce potentially toxic compounds associated with long-term harmful health effects concerning advanced aging, neurological disorders, heart disease, and cancer.[6]

Reducing rancidification

The free radical pathway for the first phase of the oxidative rancidification of fats.

Antioxidants are often used as preservatives in fat-containing foods to delay the onset or slow the development of rancidity due to oxidation. Natural antioxidants include polyphenols (for instance flavonoids), ascorbic acid (vitamin C) and tocopherols (vitamin E). Synthetic antioxidants include butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), TBHQ, propyl gallate and ethoxyquin. The natural antioxidants tend to be short-lived, so synthetic antioxidants are used when a longer shelf-life is preferred. The effectiveness of water-soluble antioxidants is limited in preventing direct oxidation within fats, but is valuable in intercepting free radicals that travel through the aqueous parts of foods. A combination of water-soluble and fat-soluble antioxidants is ideal, usually in the ratio of fat to water.

In addition, rancidification can be decreased, but not completely eliminated, by storing fats and oils in a cool, dark place with little exposure to oxygen or free radicals, since heat and light accelerate the rate of reaction of fats with oxygen. Antimicrobial agents can also delay or prevent rancidification by inhibiting the growth of bacteria or other micro-organisms that effect the process.[1]

Oxygen scavenging technology can be used to remove oxygen from food packaging and therefore prevent oxidative rancidification.

Measurement of oxidative stability

Oxidative stability is a measure of an oil or fat's resistance to oxidation. Because the process takes place through a chain reaction, the oxidation reaction has a period when it is relatively slow, before it suddenly speeds up. The time for this to happen is called the "induction time", and it is repeatable under identical conditions (temperature, air flow, etc.). There are a number of ways to measure the progress of the oxidation reaction. One of the most popular methods currently in use is the Rancimat method.

The Rancimat method is carried out using an air current at temperatures between 50 and 220 °C. The volatile oxidation products (largely formic acid[7]p. 47) are carried by the air current into the measuring vessel, where they are absorbed (dissolve) in the measuring fluid (distilled water). By continuous measurement of the conductivity of this solution, oxidation curves can be generated. The cusp point of the oxidation curve (the point where a rapid rise in the conductivity starts) gives the induction time of the rancidification reaction,[8] and can be taken as an indication of the oxidative stability of the sample.

The Rancimat method, the oxidative stability instrument (OSI) and the oxidograph were all developed as automatic versions of the more complicated AOM (active oxygen method), which is based on measuring peroxide values,[8] for determining the induction time of fats and oils. Over time, the Rancimat method has become established, and it has been accepted into a number of national and international standards, for example AOCS Cd 12b-92 and ISO 6886.

See also

References

  1. ↑ 1.0 1.1 Erich Lück and Gert-Wolfhard von Rymon Lipinski "Foods, 3. Food Additives" in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. doi: 10.1002/14356007.a11_561
  2. ↑ Alfred Thomas, "Fats and Fatty Oils" in Ullmann's Encyclopedia of Industrial Chemistry, 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a10_173
  3. ↑ 3.0 3.1 Termes, Waldemar (1990). Naturwissenschaftliche Grundlagen der Lebensmittelzubereitung. Hamburg: Behr's Verlag. pp. 50–37. ISBN 9783925673849.
  4. ↑ Peter P. Klemchuk "Antioxidants" in Ullmann's Encyclopedia of Industrial Chemistry, 2000, Wiley-VCH, Weinheim. doi: 10.1002/14356007.a03_091
  5. ↑ Freeman, I. P. (2000). "Margarines and Shortenings". Ullmann's Encyclopedia of Industrial Chemistry. doi:10.1002/14356007.a16_145. ISBN 3527306730.
  6. ↑ Monica Eng (7 March 2012). "Has your food gone rancid?". Chicago Tribune.
  7. ↑ Allen, J.C. and Hamilton, R.J. (1994). Rancidity in Foods. Springer-Verlag GmbH. ISBN 978-0-8342-1287-9.
  8. ↑ 8.0 8.1 Miraliakbari, H. (2007). Tree nut oils: chemical characteristics, oxidation and antioxidants. Library and Archives Canada = Bibliothèque et Archives Canada. p. 31. ISBN 978-0-494-19381-5.

Further reading

External links

Look up rancidification in Wiktionary, the free dictionary.