Prussian T 10

Prussian T 10
DRG Class 76
Number(s): DRG 76 001–011
OHE 76 091–096
Quantity: 12
Manufacturer: Borsig
Year(s) of manufacture: 1909ff.
Retired: 1964
Wheel arrangement: 4-6-0
Axle arrangement: 2'C h2t
Gauge: 1,435 mm (4 ft 8 12 in)
Length over buffers: 11,800 mm
Service weight: 76.1 t
Adhesive weight: 48.7 t
Axle load: 16.3 t
Top speed: 100 km/h
Indicated Power: 647 kW
Driving wheel diameter: 1,750 mm
Leading wheel diameter: 1,000 mm
No. of cylinders: 2
Cylinder bore: 575 mm
Piston stroke: 630 mm
Boiler Overpressure: 12 bar
Grate area: 1.85 m²
Superheater area: 39.20 m²
Evaporative heating area: 134.33 m²

The Prussian Class T 10s were tank locomotives operated by the Prussian state railways. They were procured for duties between Frankfurt and Wiesbaden between 1909 and 1912. This 41 km long route between the two termini was to be worked without turning the locomotive. Because the engine tended to derail, in practice it was turned whenever possible. On these engines, supplied by Borsig, the boiler from the Prussian P 6 and the running gear and drive from the Prussian P 8 were used. The boiler had to be positioned further forward than was usual on other locomotives in order to even out the distribution of weight, because the design omitted any trailing wheels. The first trial runs took place on 30 June 1909.

The Reichsbahn took over 11 machines of this class as their DRG Class 76, the engines were given numbers 76 001–011. The last locomotive was given to the French Northern Railway under the terms of the Versailles Treaty. Eight engines were taken over by the Deutsche Bundesbahn. Between 1945 and 1948 they were either retired or sold to private railways. In 1964 there were still six units on duty with the East Hanoverian Railway (OHE).

No examples of the DRG Class 76 have been saved.

See also

External links