Prue Standard

Standard
Paul Bikle's Prue Standard
Role Glider
National origin United States
Designer Irving Prue
Introduction 1961
Status No longer in production
Number built Three
Variants Prue Super Standard

The Prue Standard is an American high-wing, single-seat, V-tailed, FAI Standard Class glider that was designed by Irving Prue.[1][2][3]

Design and development

The Prue Standard was designed in response to the Fédération Aéronautique Internationale introduction of rules creating the Standard Class. The prototype was completed in 1961.[1]

The Standard is an all-metal aircraft with a fixed monowheel landing gear. The prototype originally had wings with a 15 m (49.2 ft) span and dive brakes on the lower wing surface. The wing employs a NACA 63-618 laminar flow airfoil, an I-beam spar and has a semi-tapered planform.[1]

Only three examples were completed, all were different and all have since been modified further. The type was further refined into a new design in 1962, the Prue Super Standard.[1]

Operational history

Paul Bikle flew the second Standard completed to a world record distance of 557 mi (896 km) in 1963. That flight was the longest ever made by a sailplane up to that date.[1]

The prototype was flown 14,000 mi (22,531 km) cross country and had accumulated more than 850 hours by 1974.[1]

All aircraft were registered as Experimental Amateur-builts. Notice EXPERIMENTAL stenciled beneath the canopy in the photo. Only one Prue Standard still exists.[2][3]

Variants

Standard prototype
The prototype, registered N9726Z, later had its wings extended to 54 ft (16.5 m), giving it a wing area of 130 sq ft (12 m2) and an aspect ratio of 23:1. The V-tail was also made longer. The modifications also raised the empty weight to 520 lb (236 kg). The prototype was converted to a Super Standard and has been de-registered.[1]
Standard #2
This aircraft had a longer fuselage and a deeper cockpit section. It also featured top and bottom dive brakes. It later had its wings extended. It was registered as N9730Z, but is no longer on the Federal Aviation Administration registry.[1][4]
Standard #3
This aircraft was built by Bob Gravance of Palmdale, California. It features dive brakes on the bottom of the wing only, but externally mounted. Otherwise the fuselage is the same as #2. This aircraft had a new set of longer wings built for it, featuring a straight taper. The aircraft was reportedly a total loss after a tied-down accident at El Mirage, California. Registered as N2728Z the aircraft is the sole Standard still on the FAA registry.[1]

Specifications (Standard - original configuration)

Data from Soaring[1]

General characteristics

Performance

See also


Related lists

References

Wikimedia Commons has media related to Prue Standard.
  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Rogers, Bennett: 1974 Sailplane Directory, Soaring Magazine, page 34. Soaring Society of America, August 1974. USPS 499-920
  2. 2.0 2.1 Federal Aviation Administration (June 2011). "Make / Model Inquiry Results N9726Z". Retrieved 19 June 2011.
  3. 3.0 3.1 Federal Aviation Administration (June 2011). "Make / Model Inquiry Results N9728Z". Retrieved 19 June 2011.
  4. Federal Aviation Administration (June 2011). "Make / Model Inquiry Results N9730Z". Retrieved 19 June 2011.