Proportional representation

The term proportional representation (PR) characterizes electoral systems by which divisions in an electorate are reflected proportionately in the elected body. If 30% of the electorate support a particular political party, then roughly 30% of seats will be won by that party. The essence of such systems is that all votes contribute to the result: not just a plurality, or a bare majority, of them. Proportional representation requires the use of multiple-member voting districts (also called super-districts); it is not possible using single-member districts alone (but see biproportional apportionment).[1][2][3]

There are, basically, only two PR voting methods: party list PR and the single transferable vote (STV).[4]Mixed member proportional representation (MMP), a hybrid method that uses party list PR as its proportional component, is also usually considered a distinct PR method.[5]:22[6]:142–143[7] With party list PR, political parties define candidate lists and voters vote for a list. The relative vote for each list determines how many candidates from each list are actually elected. Lists can be "closed" or "open"; open lists allow voters to indicate individual candidate preferences and vote for independent candidates. Voting districts can be as large as a province or an entire nation. The single transferable vote uses smaller districts, voters ranking individual candidates in order of preference. During the count, as candidates are elected or eliminated, surplus or discarded votes that would otherwise be wasted are transferred to other candidates according to the preferences. STV enables voters to vote across party lines and to elect independent candidates. Mixed member proportional representation (MMP), also called the additional member system (AMS), is a hybrid, two-tier,[2]:118[8] system combining a non-proportional single-winner election and a compensatory regional or national party list PR one. Voters have two votes, one for their single-member district and one for the party list, the party list vote determining the balance of the parties in the elected body.[2][9] Biproportional apportionment, first used in Zurich in 2006, is a two-tier method for adjusting an election's result to achieve overall proportionality.[10] A further system produces near perfect proportionality by dispensing with voting altogether: the random selection of representatives from the populace, known as sortition. It was used in ancient Athens and the Venetian Republic and is still used today in the summons to jury duty. In recent years, it has received increasing academic attention.[11][12][13][14]

Some form of proportional representation is used for national lower house elections in 94 countries, party list PR being the most widely used (85).[15] MMP is used in seven lower houses, and STV, despite long being advocated by political scientists,[2]:71 is used in only two: Ireland, since independence in 1922,[16] and Malta, since 1921;[17] in the United States, party bosses were generally opposed to it because it transferred more power to the electorate when selecting independent candidates to put forward.[18]

As with all electoral systems, there are overlapping and contentious claims in terms of its advantages and disadvantages.[19]

PR systems in the broader family of voting systems

Most experts group electoral systems into 4 general categories:

Discussions about PR often include comparisons between PR and plurality/majority voting systems or among different types of PR and mixed member systems. Party list PR and STV are usually considered PR systems. Mixed member systems include MMP and MMM, also known as parallel voting.[2][9]

The extent to which mixed member systems yield proportional results depends upon the features of each system, but MMP has the potential to be highly proportional due to the compensatory way that list seats are distributed, and some categorizations include it as a PR system.[5][6][20] MMM adds an element of proportionality to single-winner systems by the addition of list seats, but distributes only the list seats proportionately without compensating for disproportions in the distribution of single-winner seats.

Advantages and disadvantages of proportional representation

The case for proportional representation was made by John Stuart Mill in his 1861 essay Considerations on Representative Government:

In a representative body actually deliberating, the minority must of course be overruled; and in an equal democracy, the majority of the people, through their representatives, will outvote and prevail over the minority and their representatives. But does it follow that the minority should have no representatives at all? ... Is it necessary that the minority should not even be heard? Nothing but habit and old association can reconcile any reasonable being to the needless injustice. In a really equal democracy, every or any section would be represented, not disproportionately, but proportionately. A majority of the electors would always have a majority of the representatives, but a minority of the electors would always have a minority of the representatives. Man for man, they would be as fully represented as the majority. Unless they are, there is not equal government ... there is a part whose fair and equal share of influence in the representation is withheld from them, contrary to all just government, but, above all, contrary to the principle of democracy, which professes equality as its very root and foundation.[1]

Most academic political theorists agree with Mill,[6] that in a representative democracy the representatives should represent all segments of society.

Fairness

PR attempts to resolve the unfairness of majoritarian and plurality voting systems, where the largest parties receive an "unfair" "seat bonus" and smaller parties are disadvantaged and have difficulty winning any representation at all (Duverger's law). The established parties in UK elections can win formal control of the parliament with as little as 35% of votes (UK general election, 2005). In Canada, majority governments are regularly formed by parties with the support of under 40% of votes cast. Coupled with turnout levels in the electorate of less than 60%, this can lead to a party forming a majority government by convincing as few as one quarter of the electorate to vote for it. In the 2005 UK general election, for example, the Labour Party under Tony Blair won a comfortable parliamentary majority with the votes of only 21.6% of the total electorate.[21]:3 But PR systems with a high electoral threshold, or other features that reduce proportionality, are not necessarily much fairer: in the Turkish general election, 2002, using an open list system with a 10% threshold, 46% of votes were wasted.[2]:83

Single-winner systems can also disproportionately benefit regional parties that can win districts where they have a strong following, while other parties with national support but no strongholds, like the Greens, win few or no seats. An example is the Bloc Québécois in Canada that won 52 seats in the 1993 federal election, all in Quebec, on 18% of the national vote, while the Progressive Conservatives collapsed to two seats on 16% spread nationally.[22]

Election of minor parties

The use of multiple-member districts enables a greater variety of candidates to be elected. The more representatives per district and the lower the minimum threshold of votes required for election the more minor parties can gain representation. In emerging democracies, inclusion of minorities in the legislature can be essential for social stability and to consolidate the democratic process.[2]:58

Critics, on the other hand, claim this can give extreme parties a foothold in parliament, sometimes cited as a cause for the collapse of the Weimar government. With very low thresholds, very small parties can act as "king-makers", holding larger parties to ransom during coalition discussions. The example of Israel is often quoted,[2]:59 but these problems can be limited, as in the modern German Bundestag, by the introduction of higher threshold limits for a party to gain parliamentary representation.

Another criticism is that the dominant parties from plurality systems, often looked on as "coalitions" or as "broad churches",[23] can fragment under PR as the election of candidates from smaller groups becomes possible. Israel, again, and Brazil and Italy are examples.[2]:59,89 However, research shows, in general, there is only a marginal increase in the number of parties in parliament.[24]

STV, the only PR system which does not require political parties,[25] enables independent candidates to be elected.

Coalitions

The election of smaller parties gives rise to the principle objection to PR systems, that they almost always result in coalition governments.[2]:59[6]

Supporters of PR see coalitions as an advantage, forcing compromise between parties to form a coalition at the centre of the political spectrum, and so leading to continuity and stability. Opponents counter that with many policies compromise is not possible (for example funding a new stealth bomber, or leaving the EU). Neither can many policies be easily positioned on the left-right spectrum (for example, the environment). So policies are horse-traded during coalition formation, with the consequence that voters have no way of knowing which policies will be pursued by the government they elect; voters have less influence on governments. Also, coalitions do not necessarily form at the centre, and small parties can have excessive influence, supplying a coalition with a majority only on condition that a policy or policies favoured by few voters is adopted. Most importantly, the ability of voters to vote a party in disfavour out of power is curtailed.[6]

All these disadvantages, the PR opponents contend, are avoided by two-party plurality systems. Coalitions are rare; the two dominant parties necessarily compete at the centre for votes, so that governments are more reliably moderate; the strong opposition necessary for proper scrutiny of government is assured; and governments remain sensitive to public sentiment because they can be, and are, regularly voted out of power.[6] However, the US experience shows that this is not necessarily so, and that a two-party system can result in a "drift to extremes", hollowing out the centre,[26] or, at least, in one party drifting to an extreme.[27]

Nevertheless, on average, compared to countries using plurality systems, governments elected with PR accord more closely with the median voter and the citizens are more content with democracy.[24]

Voter participation

Plurality systems usually result in single-party government because relatively few votes in the most finely balanced districts, the "swing seats", can transfer sufficient seats to the opposition to swing the election. More partisan districts remain invulnerable to swings of political mood. In the UK, for example, about half the constituencies have always elected the same party since 1945;[28] in the 2012 US House elections 45 districts (10% of all districts) were uncontested by one of the two dominant parties.[29] Voters who know their preferred candidate cannot win have little incentive to vote, and if they do their vote has no effect, it is "wasted".[2]:10

With PR, there are no "swing seats", most votes contribute to the election of a candidate so parties need to campaign in all districts, not just those where their support is strongest or where they perceive most advantage. This fact in turn encourages parties to be more responsive to voters, producing a more "balanced" ticket by nominating more women and minority candidates.[22] On average about 8% more women are elected.[24]

Since most votes count, there are fewer "wasted votes", so voters, aware that their vote can make a difference, are more likely to make the effort to vote, and less likely to vote tactically. Compared to countries with plurality voting systems, voter turnout improves and the population is more involved in the political process.[2][22][24]

Gerrymandering

To ensure approximately equal representation, plurality systems are dependent on the drawing of arbitrary boundaries of their single-member districts, a process vulnerable to political interference, to gerrymandering. To compound the problem, boundaries have to be periodically re-drawn to accommodate population changes. Even apolitically drawn boundaries can unintentionally produce the effect of gerrymandering, reflecting naturally occurring concentrations.[30] PR systems with their multiple-member districts are less prone to this – research suggests five-seat districts are immune to gerrymandering.[30] The district boundaries are less critical and so can be aligned with historical boundaries such as cities, counties, states, or provinces; population changes can be accommodated by simply adjusting the number of representatives elected. For example, Professor Mollison in his 2010 plan for STV for the UK set an upper limit of 100,000 electors per MP so that a constituency of 500,000 electors would have five seats (1:100,000) but one of 500,001 six seats (1:83,000). His district boundaries follow historical county and local authority boundaries, yet he achieves more uniform representation than does the Boundary Commission, the body responsible for balancing the UK's first-past-the-post constituency sizes.[28][31]

Mixed member systems are susceptible to gerrymandering for the local seats that remain a part of such systems. Under MMM, there is no compensation for the effects that such gerrymandering might have. Under MMP, the use of compensatory list seats makes gerrymandering less of an issue. However, its effectiveness in this regard depends upon the features of the system, including the size of the regional districts, the relative share of list seats in the total, and opportunities for collusion that might exist. A striking example of how the compensatory mechanism can be undermined can be seen in the 2014 Hungarian parliamentary election, where the leading party, Fidesz, combined gerrymandering and a number of other tricks to contrive a two-thirds parliamentary majority from a 45% vote.[32][33]

Link between constituent and representative

An accusation against PR is that because districts are larger the link between voters and their parliamentary representative is lost, or at best weakened. The argument barely applies to mixed member systems because they incorporate single-member districts, although, because up to half the parliamentary seats are list seats, the districts are necessarily up to twice as large as those of an equivalent FPTP parliament. But the argument has to be conceded in the case of party list systems with larger districts, especially those with a nationwide district like the Netherlands and Israel. With smaller districts, in particular with STV, there are counter-arguments: about 90% of constituents can consult a representative of a party to which they gave their first preference,[28] someone whom they might see as more sympathetic to their problem. In any case, they have a variety of representatives to choose from. With plurality systems, only 48% of voters, on average, vote for the single representative, others may hesitate to ask for help from a political opponent, or someone who, indeed, may be the subject of the complaint.[34][35]

How important the link between constituent and representative is, that is another matter. In Britain, some MPs may overstate their importance to their constituents; most people, after all, do not know the name of their MP.[6]:5 But under the Irish STV system the amount of constituency work has been criticised as excessive, suggesting an effective, perhaps too effective, link.[36]

Wider benefits to society

Wider benefits from PR have been identified in societies using it as compared to those using FPTP, including higher scores on the UN Human Development Index, a measure of health, education, and personal security, higher economic growth, lower deficits or larger surpluses, less inequality, and better environmental protection.[24]

Attributes of PR systems

District magnitude

Academics agree that the most important influence on proportionality is an electoral district's magnitude, the number of representatives elected from the district. Proportionality improves as the magnitude increases.[2] Scholars recommend voting districts of between three and seven members.[4]

At one extreme, the Chilean Binomial system, a nominally proportional open-list system, uses two-member districts resulting in the election of one candidate from each of the two dominant political blocks, and so cannot be considered proportional.[2]:79

At the other, where the district encompasses the entire country, and with a low minimum threshold, highly proportionate representation of political parties can result, and parties gain by broadening their appeal by nominating more minority and women candidates.[2]:83

After the introduction of STV in Ireland in 1921 magnitude slowly diminished as more and more three-member constituencies were defined, benefiting the dominant Fianna Fáil, until 1979 when an independent boundary commission was established reversing the trend.[37] In 2010, a parliamentary constitutional committee recommended a minimum magnitude of four.[38] Nonetheless, despite relatively low magnitudes Ireland has generally experienced highly proportional results.[2]:73

In the FairVote plan for STV (which FairVote calls choice voting) for the US House of Representatives, three- to five-member super-districts are proposed.[39] In Professor Mollison's plan for STV in the UK, four- and five-member districts are used, with three and six as necessary to fit existing boundaries.[28]

Minimum threshold

The minimum threshold is the minimum vote required to win a seat. The lower the threshold the higher the proportion of votes contributing to the election of representatives and the fewer the votes wasted.[2]

All electoral systems have thresholds, either formally defined or as a mathematical consequence of the parameters of the election.[2]:83

A formal threshold usually requires parties to win a certain percentage of the vote in order to be awarded seats from the party lists. In Germany and New Zealand (both MMP), the threshold is 5% of the national vote but both define an alternate threshold of constituency seats won, three in Germany, one in New Zealand. Turkey defines a threshold of 10%, the Netherlands 0.67%.[2] Israel has raised its threshold from 1% (before 1992) to 1.5% (up to 2004), 2% (in 2006) and 3.25% in 2014.[40]

In STV, elections winning the quota (ballots/(seats+1)) of first preference votes assures election. However, well regarded candidates who attract good second (and third, etc.) preference support can hope to win election with only half the quota of first preference votes. Thus, in a six-seat district the effective threshold would be 7.14% of first preference votes (100/(6+1)/2).[28] The need to attract second preferences tends to promote consensus and disadvantage extremes.

Party magnitude

Party magnitude is the number of candidates elected from one party in one district. As party magnitude increases a more balanced ticket will be more successful encouraging parties to nominate women and minority candidates for election.[41]

But under STV too many candidates can be counter-productive, splitting the vote and so losing seats. An example of this was identified in a ward in the 2007 Scottish local elections where Labour, putting up three candidates, won only one seat but where they would have won two had a candidate particularly favoured by Labour voters not stood.[28] The same effect may have contributed to the collapse of Fianna Fáil in the 2011 Irish general election.[42]

Others

Other aspects of PR can influence proportionality such as the size of the elected body, the choice of open or closed lists, ballot design, and vote counting methods.

Measuring proportionality

A number of ways of measuring proportionality have been proposed, including the Loosemore-Hanby Index, the Sainte-Laguë Index and the Gallagher Index. None of these fully support ranked voting.[43][44]

Deviation from proportionality denotes the proportion of malapointment in a democratic process. The deviation is a mathematical relationship between the percentage of votes obtained by a political party and the percentage of parliamentary seats allocated to it. It is calculated by subtracting each party's vote share from its seat share, adding up the absolute values (ignoring any negative signs), and dividing by two.[45]:4–6

PR electoral systems

Party list PR

The parties each list their candidates according to that party's determination of priorities. In closed list systems, voters vote for a list of candidates, with the party choosing the order of candidates on the list and thus, in effect, their probability of being elected. Each party is allocated seats in proportion to the number of votes it receives, using the party-determined ranking order. In a local list system, parties divide their candidates in single member-like constituencies, which are ranked inside each general party list depending by their percentages. This method allows electors to judge every single candidate as in an FPTP system. In an open list, voters may vote, depending on the model, for one person, or for two, or indicate their order of preference within the list – nevertheless the number of candidates elected from the list is determined by the number of votes the list receives.

There is an intermediate system in countries like Uruguay, where each party presents several closed lists, each representing a faction. Seats are distributed between parties according to the number of votes, and then between the factions within each party.

This system is used in many countries, including Finland (local list), Latvia (open list), Sweden (open list), Israel (national closed list), Brazil (open list), the Netherlands (open list), Russia (closed list), South Africa (closed list), Democratic Republic of the Congo (open list). For elections to the European Parliament, most member states use open lists; but most large EU countries use closed lists, so that the majority of EP seats are distributed by those.[46] Local lists were used to elect the Italian Senate during the second half of the 20th century.

Single transferable vote

The single transferable vote (STV), also called choice voting,[3][18] is a preferential voting system: voters rank candidates in order of preference. Voting districts usually elect three to seven representatives. The count is cyclic, electing or eliminating candidates and transferring votes until all seats are filled. A candidate is elected whose tally reaches a quota, the minimum vote that guarantees election. The candidate's surplus votes (those in excess of the quota) are transferred to other candidates at a fraction of their value proportionate to the surplus, according to the votes' preferences. If no candidates reach the quota, the candidate with the fewest votes is eliminated, those votes being transferred to their next preference at full value, and the count continues. There are many methods for transferring votes. Some early, manual, methods transferred surplus votes according to a randomly selected sample, or transferred only a "batch" of the surplus, other more recent methods transfer all votes at a fraction of their value (the surplus divided by the candidate's tally) but may need the use of a computer. Some methods may not produce exactly the same result when the count is repeated. There are also different ways of treating transfers to already elected or eliminated candidates, and these, too, can require a computer.[47][48]

In effect, the method produces groups of voters of equal size that reflect the diversity of the electorate, each group having a representative the group voted for. Some 90% of voters have a representative to whom they gave their first preference. Voters can choose candidates using any criteria they wish, the proportionality is implicit.[28] Political parties are not necessary; all other PR voting systems presume that parties reflect voters wishes, and so give power to parties.[47] STV satisfies the voting system criterion proportionality for solid coalitions – a solid coalition for a set of candidates is the group of voters that rank all those candidates above all others – and is therefore considered a system of proportional representation.[47] However, the small district magnitude used in STV elections has been criticized as impairing proportionality, especially when more parties compete than there are seats available,[6]:50 and STV has, for this reason, sometimes been labelled "quasi proportional".[49]:83 While this may be true when considering districts in isolation, results overall are proportional. In Ireland, with particularly small magnitudes, results are "highly proportional".[2]:73[16] In 1997, the average magnitude was 4.0 but eight parties gained representation, four of them with less than 3% of first preference votes nationally. Six independent candidates also won election.[37] STV has also been described as the most proportional system.[49]:83 The system tends to handicap extreme candidates because, to gain preferences and so improve their chance of election, candidates need to canvass voters beyond their own circle of supporters, and so need to moderate their views.[50][51] Conversely, widely respected candidates can win election with relatively few first preferences by benefitting from strong subordinate preference support.[28]

STV is used for two national lower houses of parliament, Ireland, since independence (as the Irish Free State) in 1922,[16] and Malta, since 1921, long before independence in 1966.[52] It is also used for all other elections in Ireland except for that of the presidency, for the Northern Irish assembly and European and local authorities, Scottish local authorities, some New Zealand and Australian local authorities,[34] the Tasmanian (since 1907) and Australian Capital Territory assemblies, where the method is known as Hare-Clark,[53] and the city council in Cambridge, Massachusetts, (since 1941).[18][54]

Australian Senate STV

The term STV in Australia refers to the Senate voting system, a variant of Hare-Clark characterized by the "above the line" group voting ticket, a party list option. It is used in the Australian upper house, the Senate, and some state upper houses. Due to the number of preferences that are compulsory if a vote for candidates (below-the-line) is to be valid – for the Senate a minimum of 90% of candidates must be scored, in 2013 in New South Wales that meant writing 99 preferences on the ballot[53] – 95% and more of voters use the above-the-line option, making the system, in all but name, a party list system.[55][56][57] Parties determine the order in which candidates are elected and also control transfers to other lists and this has led to anomalies: preference deals between parties, and "micro parties" which rely entirely on these deals. Additionally, independent candidates are unelectable unless they form, or join, a group above-the-line.[58][59] Concerning the development of STV in Australia researchers have observed: "... we see real evidence of the extent to which Australian politicians, particularly at national levels, are prone to fiddle with the electoral system".[49]:86 A parliamentary commission investigating the 2013 election, has proposed abolishing the group voting ticket, prohibiting preference transfers between lists but allowing voters to rank above-the-line party lists, and easing compulsory preference voting.[60][61]

Two tier systems

Two-tier systems use two levels, or tiers, of vote apportionment. The most prominent example is mixed member proportional representation (MMP), as used in Germany since 1949, a hybrid system combining single-winner districts with a compensating party list PR vote at the national level. Straight party list PR systems, too, can use two-tier apportionment, with party lists at the district level but apportioning seats at the district and national levels.[2]:118 Another two-tier system is biproportional apportionment, a method of proportionately balancing elections that has been adopted in some Swiss cities and cantons.

Mixed member proportional representation

Mixed member proportional representation (MMP) combines a single-district vote, usually first-past-the-post, with a compensatory regional or nation-wide party list proportional vote. The system aims to combine the local district representation of FPTP and the proportionality of a national party list system. It was invented for the German Bundestag after the second world war and has spread to Lesotho, Mexico, Bolivia and New Zealand. The system is also used for the Welsh and Scottish assemblies where it is called the additional member system.[9][62] Voters have two votes, one for their district representative and one for the party list, the list vote determining the relative strength of parties in parliament. After the district winners have been determined, sufficient candidates from each party list are elected to "top-up" each party to the overall number of parliamentary seats due to it according to its overall list vote. Before apportioning list seats, all list votes for parties which failed to reach the minimum threshold are discarded, the proportions for remaining parties improve. Also, any direct seats won by independent candidates are subtracted from the parliamentary total used to apportion list seats.[63]

The system produces highly proportional representation of political parties, but proportionality can be compromised if the ratio of list to district seats is too low, it may then not be possible to completely compensate district seat disproportionality. Another problem can be how overhang seats are handled, district seats that a party wins in excess of the number due to it under the list vote. To preserve proportionality, other parties need to be awarded "balance seats", increasing the size of parliament by twice the number of overhang seats, but this is not always done. Until recently, Germany increased the size of parliament by the number of overhang seats but did not use the increased size for apportioning list seats. This was changed for the 2013 national election after the constitutional court rejected the previous law, not compensating for overhang seats had resulted in a negative vote weight effect.[64] Lesotho, Scotland and Wales don't increase the size of parliament at all, and, in 2012, a New Zealand parliamentary commission also proposed abandoning compensation for overhang seats, and so fixing the size of parliament. At the same time, it would abolish the single-seat threshold – any such seats would then be overhang seats and would otherwise have increased the size of parliament further – and reduce the vote threshold from 5% to 4%. Proportionality would not suffer.[2][65]

Two-tier party list systems

Some party list proportional systems with open lists use a two-tier compensatory system, as in Denmark, Norway, and Sweden. In Denmark, for example, the country is divided into ten multiple-member voting districts arranged in three regions, electing 135 representatives. In addition, 40 compensatory seats are elected. Voters have one vote which can be cast for an individual candidate or for a party list on the district ballot. To determine district winners, candidates are apportioned their share of their party's district list vote plus their individual votes. The compensatory seats are apportioned to the regions according to the party votes aggregated nationally, and then to the districts where the compensatory representatives are determined. In the 2007 general election, the district magnitudes, including compensatory representatives, varied between 14 and 28. The basic design of the system has remained unchanged since its introduction in 1920.[66][67][68]

Biproportional apportionment

Biproportional apportionment is a two-tier mathematical method (iterative proportional fitting) for modifying an election result to achieve proportionality. It was proposed for elections by the mathematician Michel Balinski in 1989, and first used by the city of Zurich for its council elections in February 2006, in a modified form called "new Zurich apportionment" (Neue Zürcher Zuteilungsverfahren). Zurich had had to modify its party list PR system after the Swiss Federal Court ruled that its smallest wards, as a result of population changes over many years, unconstitutionally disadvantaged smaller political parties. With biproportional apportionment, the method of election, the use of open party lists, hasn't changed, but the way winning candidates are determined has. The proportion of seats due to each party is calculated according to their overall, city-wide, vote, and then the district winners are adjusted to conform to these proportions. This means that some candidates, who would otherwise have been successful, can be denied seats in favor of initially unsuccessful candidates, in order to improve the relative proportions of their respective parties overall. This peculiarity is accepted by the Zurich electorate because the resulting city council is proportional and all votes, regardless of district magnitude, now have equal weight. The system has since been adopted by other Swiss cities and cantons.[10][69]

Balinski has proposed another variant, fair majority voting (FMV), for single-winner voting systems, specifically for the US House of Representatives, introducing proportionality while changing neither the plurality method of election nor the, possibly gerrymandered, district boundaries. The upper apportionment tier would be at the state level.[69] In another proposal, for the UK parliament, whose elections are contested by many more parties, the authors note that parameters can be tuned to adopt any degree of proportionality deemed acceptable to the electorate. In order to elect smaller parties, a number of constituencies would be awarded to candidates placed fourth or even fifth in the constituency – unlikely to be acceptable to the electorate, the authors concede – but this effect could be substantially reduced by incorporating a third, regional, apportionment tier, or by specifying minimum thresholds.[70]

Sortition

Main article: Sortition

Sortition is the random selection of political representatives from a population. Within statistical tolerances, the selection proportionately represents the population perfectly, in all its variety; entrepreneurs, teachers, plumbers, women, ethnic minorities, retirees, liberals, socialists, conservatives etc., are all represented in proportion to their presence in society. It was used in ancient Athens where selection by lot was considered a characteristic of democracy. It was later used in the Venetian Republic and is still used today in the summons to jury duty. In the 21st century, sortition has been used to select members for special citizens' assemblies in Ontario, British Columbia, Iceland, Belgium and elsewhere, and the concept has received academic attention.[11][12][13][14]

History

One of the earliest proposals of proportionality in an assembly was by John Adams in his influential pamphlet Thoughts on Government, written in 1776 during the American Revolution:

It should be in miniature, an exact portrait of the people at large. It should think, feel, reason, and act like them. That it may be the interest of this Assembly to do strict justice at all times, it should be an equal representation, or in other words equal interest among the people should have equal interest in it.[71]

Mirabeau, speaking to the Assembly of Provence on January 30, 1789, was also an early proponent of a proportionally representative assembly:[72]

A representative body is to the nation what a chart is for the physical configuration of its soil: in all its parts, and as a whole, the representative body should at all times present a reduced picture of the people, their opinions, aspirations, and wishes, and that presentation should bear the relative proportion to the original precisely.

In February 1793, the Marquis de Condorcet led the drafting of the Girondist constitution which proposed a limited voting scheme with proportional aspects. Before that could be voted on, the Montagnards took over the National Convention and produced their own constitution. On June 24, Saint-Just proposed the single non-transferable vote, which can be proportional, for national elections but the constitution was passed on the same day specifying first-past-the-post voting.[72]

Already in 1787, James Wilson, like Adams a US Founding Father, understood the importance of multiple-member districts: "Bad elections proceed from the smallness of the districts which give an opportunity to bad men to intrigue themselves into office",[73] and again, in 1791, in his Lectures on Law: "It may, I believe, be assumed as a general maxim, of no small importance in democratical governments, that the more extensive the district of election is, the choice will be the more wise and enlightened".[74] The 1790 Constitution of Pennsylvania specified multiple-member districts for the state Senate and required their boundaries to follow county lines.[75]

STV, or, more precisely, an election method where voters have one transferable vote, was first invented in 1819 by an English schoolmaster, Thomas Wright Hill, who devised a "plan of election" for the committee of the Society for Literary and Scientific Improvement in Birmingham that used not only transfers of surplus votes from winners but also from losers, a refinement that later both Andræ and Hare initially omitted. But the procedure was unsuitable for a public election and wasn't publicised. In 1839, Hill's son, Rowland Hill, recommended the concept for public elections in Adelaide, and a simple process was used in which voters formed as many groups as there were representatives to be elected, each group electing one representative.[72]

The first practical PR election method, a list method, was conceived by Thomas Gilpin, a retired paper-mill owner, in a paper he read to the American Philosophical Society in Philadelphia in 1844: "On the representation of minorities of electors to act with the majority in elected assemblies". But the paper appears not to have excited any interest.[72]

A practical election using a single transferable vote was devised in Denmark by Carl Andræ, a mathematician, and first used there in 1855, making it the oldest PR system, but the system never really spread. It was re-invented (apparently independently) in the UK in 1857 by Thomas Hare, a London barrister, in his pamphlet The Machinery of Representation and expanded on in his 1859 Treatise on the Election of Representatives. The scheme was enthusiastically taken up by John Stuart Mill, ensuring international interest. The 1865 edition of the book included the transfer of preferences from dropped candidates and the STV method was essentially complete. Mill proposed it to the House of Commons in 1867, but the British parliament rejected it. The name evolved from "Mr.Hare's scheme" to "proportional representation", then "proportional representation with the single transferable vote", and finally, by the end of the 19th century, to "the single transferable vote".

A party list proportional representation system was devised and described in 1878 by Victor D'Hondt in Belgium. D'Hondt's method of seat allocation, the D'Hondt method, is still widely used. Victor Considerant, a utopian socialist, devised a similar system in an 1892 book. Some Swiss cantons (beginning with Ticino in 1890) used the system before Belgium, which was first to adopt list PR in 1900 for its national parliament. Many European countries adopted similar systems during or after World War I. List PR was favoured on the Continent because the use of lists in elections, the scrutin de liste, was already widespread. STV was preferred in the English-speaking world because its tradition was the election of individuals.[76]

STV was used in Tasmania in 1907. In the last Irish elections to the UK Parliament in 1919, STV was used in the University of Dublin constituency; two Independent Unionists were elected. STV has been in use since Irish independence. A mainly centrist party, Fianna Fáil, typically receives 30%–50% of the vote while opposition parties, traditionally the centre-right Fine Gael and the centre-left Labour Party, are comparatively weak. This has led to a series of coalition governments; there has not been a single-party government since 1989.

PR is used by more nations than single winner systems. Among the world's 35 most robust democracies with populations of at least two million people, only six use winner-take-all systems for elections to the legislative assembly (plurality, runoff or instant runoff); four use parallel systems; and 25 use PR.[77]

PR dominates Europe, including Germany and most of northern and eastern Europe; it is also used for European Parliament elections. France adopted PR at the end of World War II, but discarded it in 1958; it was used for parliament elections in 1986. Switzerland has the most widespread use of proportional representation, which is the system used to elect not only national legislatures and local councils, but also all local executives. PR is less common in the English-speaking world; New Zealand adopted MMP in 1993, but the UK, Canada, India and Australia all use winner-take-all systems for legislative elections.

In Canada, STV was used by the cities of Edmonton and Calgary in Alberta from 1926 to 1955, and by Winnipeg in Manitoba from 1920 to 1953. In both provinces the alternative vote (AV) was used in rural areas. First-past-the-post was re-adopted in Alberta by the dominant party for reasons of political advantage, in Manitoba a principal reason was the underrepresentation of Winnipeg in the provincial legislature.[72]:223-234[78]

STV has some history in the United States. Many cities, including New York City, once used it to break up the Democratic Party monopolies on elective office. Cincinnati, Ohio, adopted STV in 1925 to get rid of a Republican Party monopoly, but the Republicans returned the city to FPTP in 1957. From 1870 to 1980, Illinois used a semi-proportional cumulative voting system to elect its House of Representatives. Each district across the state elected both Republicans and Democrats year-after-year. Cambridge, Massachusetts, (STV) and Peoria, Illinois, (cumulative voting) continue to use PR. San Francisco had city-wide elections in which people would cast votes for five or six candidates simultaneously, delivering some of the benefits of proportional representation.

List of countries using proportional representation

Countries by type of PR system

Detailed information on voting systems applying to the first chamber of the legislature is maintained by the ACE Electoral Knowledge Network. This includes both a map and a detailed table by country. What follows is a more summary presentation on countries using proportional representation.

Country Type
Albania Party list
Algeria Party list
Angola Party list
Australia For Senate only, Single Transferable Vote
Austria Party list, 4% threshold
Argentina Party list
Aruba Party list
Belgium Party list, 5% threshold
Bolivia Mixed member proportional
Bosnia and Herzegovina Party list
Brazil Party list
Bulgaria Party list, 4% threshold
Burkina Faso Party list
Burundi Party list
Cambodia Party list
Cape Verde Party list
Colombia Party list
Costa Rica Party list
Croatia Party list, 5% threshold
Curaçao Party list
Cyprus Party list
Czech Republic Party list, 5% threshold
Denmark Party list, 2% threshold
Dominican Republic Party list
El Salvador Party list
Equatorial Guinea Party list
Estonia Party list, 5% threshold
Finland Party list
Germany Mixed member proportional, 5% (or 3 district winners) threshold
Guinea-Bissau Party list
Guyana Party list
Hong Kong Party list
Hungary Mixed member proportional
Iceland Party list
India For Upper House (Rajya Sabha) only, Single Transferable Vote by State Legislatures
Indonesia Party list, 3.5% threshold
Iraq Party list
Ireland Single Transferable Vote (For Dáil only)
Israel Party list, 3.25% threshold
Latvia Party list, 5% threshold
Lesotho Mixed member proportional
Liberia Party list
Liechtenstein Party list, 8% threshold
Luxembourg Party list
Macedonia Party list
Malta Single Transferable Vote
Mexico Mixed member proportional
Moldova Party list
Montenegro Party list
Republic of Mozambique Party list
Morocco Party list, 6% threshold
Namibia Party list
Nepal Party list
Netherlands Party list
New Caledonia Party list
New Zealand Mixed member proportional, 5% threshold
Nicaragua Party list
Northern Ireland Single Transferable Vote
Norway Party list, 4% threshold
Paraguay Party list
Peru Party list
Poland Party list, 5% threshold
Portugal Party list
Romania Mixed member proportional, 5% threshold
San Marino Party list
Sao Tome and Principe Party list
Serbia Party list
Sint Maarten Party list
Slovakia Party list, 5% threshold
Slovenia Party list, 4% threshold
South Africa Party list
Spain Party list, 3% threshold in small constituencies
Sri Lanka Party list
Suriname Party list
Sweden Party list, 4% national threshold or 12% in a district
Switzerland Party list
Tunisia Party list
Turkey Party list, 10% threshold
Uruguay Party list
Wallis and Futuna Party list

Further reading

Books

Journals

News

See also

Notes

  1. ↑ 1.0 1.1 Mill, John Stuart (1861). "Chapter VII, Of True and False Democracy; Representation of All, and Representation of the Majority only". Considerations on Representative Government. London: Parker, Son, & Bourn.
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 "Electoral System Design: the New International IDEA Handbook". International Institute for Democracy and Electoral Assistance. 2005. Retrieved 9 April 2014.
  3. ↑ 3.0 3.1 "Fair Voting/Proportional Representation". FairVote. Retrieved 9 April 2014.
  4. ↑ 4.0 4.1 "Electoral Systems". ACE Electoral Knowledge Network. Retrieved 9 April 2014.
  5. ↑ 5.0 5.1 "Voting Counts: Electoral Reform for Canada" (PDF). Law Commission of Canada. 2004. p. 22.
  6. ↑ 6.0 6.1 6.2 6.3 6.4 6.5 6.6 6.7 Forder, James (2011). The case against voting reform. Oxford: Oneworld Publications. ISBN 978-1-85168-825-8.
  7. ↑ Amy, Douglas J. "Proportional Representation Voting Systems". Mount Holyoke College. Retrieved 9 April 2014.
  8. ↑ "Where else is MMP used?". Wellington: Electoral Commission New Zealand. 2011. Retrieved 10 Aug 2014.
  9. ↑ 9.0 9.1 9.2 "Additional Member System". London: Electoral Reform Society. Retrieved 28 July 2014.
  10. ↑ 10.0 10.1 Pukelsheim, Friedrich (September 2009). "Zurich's New Apportionment" (PDF). German Research (Wiley Online Library) 31 (2). Retrieved 10 August 2014.
  11. ↑ 11.0 11.1 Hall, Matt (18 May 2012). "Sorting out sortition". openDemocracy.
  12. ↑ 12.0 12.1 "The Citizen Legislature: Sortition". Sydney: newDemocracy Foundation. Retrieved 1 June 2014.
  13. ↑ 13.0 13.1 Abrahams, Marc (16 April 2012). "Improbable research: why random selection of MPs may be best". The Guardian.
  14. ↑ 14.0 14.1 Delannoi, Gil; Dowlen, Oliver, eds. (2010). Sortition: Theory and Practice. Exeter: Imprint Academic. ISBN 9-781845-401993.
  15. ↑ ACE Project: The Electoral Knowledge Network. "Electoral Systems Comparative Data, Table by Country". Retrieved 20 November 2014.
  16. ↑ 16.0 16.1 16.2 Gallagher, Michael. "Ireland: The Archetypal Single Transferable Vote System" (PDF). Retrieved 26 October 2014.
  17. ↑ Hirczy de Miño, Wolfgang, University of Houston; Lane, John, State University of New York at Buffalo (1999). "Malta: STV in a two-party system" (PDF). Retrieved 24 July 2014.
  18. ↑ 18.0 18.1 18.2 Amy, Douglas J. "A Brief History of Proportional Representation in the United States". Mount Holyoke College. Retrieved 9 April 2014.
  19. ↑ 19.0 19.1 ACE Project Electoral Knowledge Network. "The Systems and Their Consequences". Retrieved 26 September 2014.
  20. ↑ "Proportional Representation". Encyclopedia Britannica. Retrieved 21 Sep 2014.
  21. ↑ Colin Rallings; Michael Thrasher. "The 2005 general election: analysis of the results" (PDF). Electoral Commission, Research, Electoral data. London: Electoral Commission. Retrieved 29 March 2015.
  22. ↑ 22.0 22.1 22.2 Norris, Pippa (1997). "Choosing Electoral Systems: Proportional, Majoritarian and Mixed Systems" (PDF). Harvard University. Retrieved 9 April 2014.
  23. ↑ Roberts, Iain (29 June 2010). "People in broad church parties should think twice before attacking coalitions". Liberal Democrat Voice. Retrieved 29 July 2014.
  24. ↑ 24.0 24.1 24.2 24.3 24.4 "Why Proportional Representation? A look at the evidence" (PDF). Fair Vote Canada. Retrieved 13 July 2014.
  25. ↑ Amy, Douglas J. "Single Transferable Vote Or Choice Voting". Mount Holyoke College. Retrieved 9 April 2014.
  26. ↑ Harris, Paul (20 November 2011). "'America is better than this': paralysis at the top leaves voters desperate for change". The Guardian. Retrieved 17 November 2014.
  27. ↑ Krugman, Paul (19 May 2012). "Going To Extreme". The Conscience of a Liberal, Paul Krugman Blog. The New York Times Co. Retrieved 24 Nov 2014.
  28. ↑ 28.0 28.1 28.2 28.3 28.4 28.5 28.6 28.7 Mollison, Denis. "Fair votes in practice STV for Westminster" (PDF). Heriot Watt University. Retrieved 3 June 2014.
  29. ↑ "Democrats' Edge in House Popular Vote Would Have Increased if All Seats Had Been Contested". FairVote. Retrieved 7 July 2014.
  30. ↑ 30.0 30.1 Amy, Douglas J. "How Proportional Representation Would Finally Solve Our Redistricting and Gerrymandering Problems". Mount Holyoke College. Retrieved 13 July 2014.
  31. ↑ Mollison, Denis (2010). "Fair votes in practice: STV for Westminster". Heriot-Watt University. Retrieved 3 June 2014.
  32. ↑ Scheppele, Kim Lane (April 13, 2014). "Legal But Not Fair (Hungary)". The Conscience of a Liberal, Paul Krugman Blog. The New York Times Co. Retrieved 12 July 2014.
  33. ↑ Office for Democratic Institutions and Human Rights (11 July 2014). "Hungary, Parliamentary Elections, 6 April 2014: Final Report". http://www.osce.org''. OSCE.
  34. ↑ 34.0 34.1 "Single Transferable Vote". London: Electoral Reform Society. Retrieved 28 July 2014.
  35. ↑ Amy, Douglas J. "PR Weakens the Constituency-Representative Link". Mount Holyoke College. Retrieved 28 July 2014.
  36. ↑ "Localism in Irish politics and local government reform" (PDF). Dublin: Houses of the Oireachtas. February 2013. Retrieved 28 July 2014.
  37. ↑ 37.0 37.1 Laver, Michael (1998). "A new electoral system for Ireland?" (PDF). The Policy Institute, Trinity College, Dublin.
  38. ↑ "Joint Committee on the Constitution" (PDF). Dublin: Houses of the Oireachtas. July 2010.
  39. ↑ "National projections" (PDF). Monopoly Politics 2014 and the Fair Voting Solution. FairVote. Retrieved 9 July 2014.
  40. ↑ Lubell, Maayan (Mar 11, 2014). "Israel ups threshold for Knesset seats despite opposition boycott". Thomson Reuters. Retrieved 10 July 2014.
  41. ↑ "Party Magnitude and Candidate Selection". ACE Electoral Knowledge Network.
  42. ↑ O'Kelly, Michael. "The fall of Fianna Fáil in the 2011 Irish general election". Significance. Royal Statistical Society, American Statistical Association.
  43. ↑ Kestelman, Philip (March 1999). "Quantifying Representativity". Voting matters (London: The McDougall Trust) (10). Retrieved 10 August 2013.
  44. ↑ Hill, I D (May 1997). "Measuring proportionality". Voting matters (London: The McDougall Trust) (8).
  45. ↑ Dunleavy, Patrick; Margetts, Helen (2004). "How proportional are the ‘British AMS’ systems?". Representation: Journal of Representative Democracy 40 (4): 317–329. Retrieved 25 November 2014.
  46. ↑ As counted from the table in http://www.wahlrecht.de/ausland/europa.htm [in German]; "Vorzugsstimme(n)" means "open list".
  47. ↑ 47.0 47.1 47.2 Tideman, Nicolaus (1995). "The Single Transferable Vote". Journal of Economic Perspectives (American Economic Association) 9 (1): 27–38. doi:10.1257/jep.9.1.27.
  48. ↑ O’Neill, Jeffrey C. (July 2006). "Comments on the STV Rules Proposed by British Columbia". Voting matters (London: The McDougall Trust) (22). Retrieved 10 August 2013.
  49. ↑ 49.0 49.1 49.2 David M. Farrell; Ian McAllister (2006). The Australian Electoral System: Origins, Variations, and Consequences. Sydney: UNSW Press. ISBN 978-0868408583.
  50. ↑ "Referendum 2011: A look at the STV system". Auckland: The New Zealand Herald. 1 Nov 2011. Retrieved 21 Nov 2014.
  51. ↑ "Change the Way We Elect? Round Two of the Debate". Vancouver: The Tyee. 30 Apr 2009. Retrieved 21 Nov 2014.
  52. ↑ Hirczy de Miño, Wolfgang (1997). "Malta: Single-Transferable Vote with Some Twists". ACE Electoral Knowledge Network. Retrieved 5 Dec 2014.
  53. ↑ 53.0 53.1 "The Hare-Clark System of Proportional Representation". Melbourne: Proportional Representation Society of Australia. Retrieved 21 Nov 2014.
  54. ↑ "Adoption of Plan E". Welcome to the City of Cambridge. City of Cambridge, MA. Retrieved 25 November 2014.
  55. ↑ "Above the line voting". Perth: University of Western Australia. Retrieved 21 Nov 2014.
  56. ↑ "Glossary of Election Terms". Sydney: Australian Broadcasting Corporation. Retrieved 21 Nov 2014.
  57. ↑ Hill, I.D. (November 2000). "How to ruin STV". Voting matters (London: The McDougall Trust) (12). Retrieved 10 August 2013.
  58. ↑ Green, Anthony (20 April 2005). "Above or below the line? Managing preference votes". Australia: On Line Opinion. Retrieved 21 Nov 2014.
  59. ↑ Terry, Chris (5 April 2012). "Serving up a dog’s breakfast". London: Electoral Reform Society. Retrieved 21 Nov 2014.
  60. ↑ Costar, Brian (4 July 2014). "In the Senate, below or above the line, you decide". Melbourne: The Age. Retrieved 21 Nov 2014.
  61. ↑ John, Sarah (6 June 2014). "Reforming the Australian Senate". FairVote. Retrieved 5 Dec 2014.
  62. ↑ Amy, Douglas J. "How Proportional Representation Elections Work". Mount Holyoke College. Retrieved 9 April 2014.
  63. ↑ "MMP Voting System". Wellington: Electoral Commission New Zealand. 2011. Retrieved 10 Aug 2014.
  64. ↑ "Deutschland hat ein neues Wahlrecht" (in German). Zeit Online. 22 February 2013.
  65. ↑ "Report of the Electoral Commission on the Review of the MMP Voting System". Wellington: Electoral Commission New Zealand. 2011. Retrieved 10 Aug 2014.
  66. ↑ "The Parliamentary Electoral System in Denmark". Copenhagen: Ministry of the Interior and Health. 2011. Retrieved 1 Sep 2014.
  67. ↑ "The main features of the Norwegian electoral system". Oslo: Ministry of Local Government and Modernisation. Retrieved 1 Sep 2014.
  68. ↑ "The Swedish electoral system". Stockholm: Election Authority. 2011. Retrieved 1 Sep 2014.
  69. ↑ 69.0 69.1 Balinski, Michel (February 2008). "Fair Majority Voting (or How to Eliminate Gerrymandering)". The American Mathematical Monthly (Washington D.C.: Mathematical Association of America) 115 (2). Retrieved 10 August 2014.
  70. ↑ Akartunali, Kerem; Knight, Philip A. (January 2014). "Network Models and Biproportional Apportionment for Fair Seat Allocations in the UK Elections" (PDF). University of Strathclyde. Retrieved 10 August 2014.
  71. ↑ Adams, John (1776). "Thoughts on Government". The Adams Papers Digital Edition. Massachusetts Historical Society. Retrieved 26 July 2014.
  72. ↑ 72.0 72.1 72.2 72.3 72.4 Hoag, Clarence; Hallett, George (1926). Proportional Representation. New York: The Macmillan Company.
  73. ↑ Madison, James. "Notes of Debates in the Federal Convention of 1787, Wednesday, June 6". TeachingAmericanHistory.org. Retrieved 5 August 2014.
  74. ↑ Wilson, James (1804). "Vol 2, Part II, Ch.1 Of the constitutions of the United States and of Pennsylvania – Of the legislative department, I, of the election of its members". The Works of the Honourable James Wilson. Constitution Society. Retrieved 5 August 2014.
  75. ↑ "Constitution of the Commonwealth of Pennsylvania – 1790, art.I,§ VII, Of districts for electing Senators". Duquesne University. Retrieved 9 December 2014.
  76. ↑ Humphreys, John H (1911). Proportional Representation, A Study in Methods of Election. London: Methuen & Co.Ltd.
  77. ↑ "Proportional Representation in Most Robust Democracies". Fair Vote: The Center for Voting And Democracy. Retrieved 22 January 2015.
  78. ↑ Jansen, Harold John (1998). "The Single Transferable Vote in Alberta and Manitoba" (PDF). Library and Archives Canada. University of Alberta. Retrieved 23 March 2015.

External links