Pratt & Whitney R-1860 Hornet B
| R-1860 Hornet B | |
|---|---|
 | |
| Pratt & Whitney R-1860 Hornet B | |
| Type | Radial engine |
| National origin | United States |
| Manufacturer | Pratt & Whitney |
| First run | 1929 |
| Major applications | Consolidated Fleetster Keystone B-4 Sikorsky S-40 Sikorsky S-41 |
| Developed from | Pratt & Whitney R-1690 |
The Pratt & Whitney R-1860 Hornet B was a relatively uncommon aircraft engine. It was a development of Pratt & Whitney's earlier R-1690 Hornet and was basically similar, but enlarged in capacity from 1,690 to 1,860 cubic inches (30.5 L).[1][2] Bore was increased by 1/8" and the stroke by 3/8". Both engines were air-cooled radial engines, with a single row of nine cylinders.
Design and development
The cylinder and valve design was typical for Pratt & Whitney, a simple design with two large valves driven by pushrods. The enlarged engine was designed by George Willgoos and was first available in 1929.[3]
The Hornet series of engines was similar to the Wasp, but larger. In both series a nine-cylinder single-row engine was later supplemented by an enlarged fourteen cylinder engine, with two rows of the same cylinders, but reduced in number to seven per row.
Two of these engines, the enlarged single-row Hornet B described here and the R-1830 Twin Wasp, were of near-identical capacity (1860 vs. 1830), although the fourteen-cylinder Twin Wasp was more complex and costly than the nine-cylinder, single-row Hornet B. The Twin Wasp was by far the more powerful engine though, even in its early versions it produced 800 hp to the Hornet B's 575 bhp. A further advantage was the reduced diameter of the Wasp: 48 inches compared to 57. This reduced drag, and the very large diameter of the Hornet would also have been a serious drawback for visibility if used in a small single-engined aircraft.
Although a technically competent design, the enlarged Hornet B engine was not a commercial success. Customers preferred to buy the R-1830 Twin Wasp instead, which in time became the most numerous aircraft engine ever produced.
Applications
- Bellanca C-27 Airbus
- Boeing Monomail
- Boeing YB-9
- Consolidated Commodore
- Consolidated Fleetster
- Fokker F-32
- Keystone B-4A
- Keystone LB-8 (prototype only)
- Keystone XLB-12 (engine evaluation testbed only)
- Martin XT6M (prototype only)
- Sikorsky S-40
- Sikorsky S-41
Specifications
Data from "Pratt & Whitney Hornet R-1860-B". Smithsonian National Air and Space Museum. and Aircraft Piston Engines by Herschel Smith
General characteristics
- Type: Nine-cylinder single-row supercharged air-cooled radial engine
- Bore: 6.25 in. (158.8 mm)
- Stroke: 6.75 in. (171.4 mm)
- Displacement: 1864 cuin (30.54 L)
- Length: 113.7 cm (44.78 in.)
- Diameter: 144.6 cm (56.93 in.)
- Dry weight: 376.4 kg (830 lb)
Components
- Valvetrain: Pushrod-actuated, two valves per cylinder
- Supercharger: Single-speed centrifugal type supercharger
- Cooling system: Air-cooled
- Reduction gear: Epicyclic gearing
Performance
- Power output: 575 hp (429 kW) at 1,950 rpm
See also
- Related development
- Pratt & Whitney R-1690 Hornet A
- Pratt & Whitney R-2180 Twin Hornet
- Comparable engines
- Pratt & Whitney R-1830 Twin Wasp
- Wright R-1820 Cyclone 9
- Bristol Pegasus
- Related lists
References
- Notes
- Bibliography
- Connors, Jack (2010). The Engines of Pratt & Whitney: A Technical History. Reston. Virginia: American Institute of Aeronautics and Astronautics. ISBN 978-1-60086-711-8.
- Gunston, Bill (2006). World Encyclopedia of Aero Engines, 5th Edition. Phoenix Mill, Gloucestershire, England, UK: Sutton Publishing Limited. ISBN 0-7509-4479-X.
- "Pratt & Whitney Hornet R-1860-B". Smithsonian National Air and Space Museum.
- Smith, Herschel (1981). Aircraft Piston Engines. New York, New York: McGraw-Hill. ISBN 0-07-058472-9.
External links
 |
Wikimedia Commons has media related to Pratt & Whitney R-1860. |
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||