Pioneer Zephyr

Burlington Zephyr passenger train approaching station and waiting passengers at East Dubuque, Illinois
This "drumhead" logo originally adorned the end of the observation car on the Pioneer Zephyr.

The Pioneer Zephyr is a diesel-powered railroad train formed of railroad cars permanently articulated together with Jacobs bogies, built by the Budd Company in 1934 for the Chicago, Burlington and Quincy Railroad (CB&Q), commonly known as the Burlington. The train featured extensive use of stainless steel, was originally named the Zephyr, and was meant as a promotional tool to advertise passenger rail service in the United States. The construction included innovations such as shotwelding (a specialized type of spot welding) to join the stainless steel, and articulation to reduce its weight.

On May 26, 1934, it set a speed record for travel between Denver, Colorado, and Chicago, Illinois, when it made a 1,015-mile (1,633 km) non-stop "Dawn-to-Dusk" dash in 13 hours 5 minutes at an average speed of 77 mph (124 km/h). For one section of the run it reached a speed of 112.5 mph (181 km/h), just short of the then US land speed record of 115 mph (185 km/h). The historic dash inspired a 1934 film and the train's nickname, "The Silver Streak".[1][2][3][4]

The train entered the regular revenue service on November 11, 1934, between Kansas City, Missouri; Omaha, Nebraska; and Lincoln, Nebraska. It operated this and other routes until its retirement in 1960, when it was donated to Chicago's Museum of Science and Industry, where it remains on public display. The train is generally regarded as the first successful streamliner on American railroads.[4][5]

Concept and construction

In the early 1930s, the US was in the depths of the Great Depression. Without the money to purchase new goods, freight trains were not hauling as much as they had in the previous decade. People who could not buy goods also could not afford to travel to the extent that they had before, so passenger revenues were also down. Even if they did have the money to travel, the equipment that railroads were using to carry passengers had not changed much since the middle of the 19th century. Railroads needed a way to re-energize the traveling public and offer a bit of hope for the days to come.[6]

The engine in the Pioneer Zephyr

One of the railroad presidents who faced this challenge was Ralph Budd, formerly of the Great Northern Railway and now president of the Chicago, Burlington and Quincy Railroad (Burlington), who needed a new train to get the public interested in traveling again. Naming the train was a task that was very seriously taken by Budd. He wanted a name that started with the letter Z because this train was intended to be the "last word" in passenger service; Budd and his coworkers looked up the last words in their dictionaries, but neither zymurgy nor zyzzle conveyed the meanings that Budd was looking for. The name of the new train came from The Canterbury Tales, which Budd had been reading. The story begins with pilgrims setting out on a journey, inspired by the budding springtime and by Zephyrus, the gentle and nurturing west wind. Budd thought that would be an excellent name for a sleek new traveling machine—Zephyr.[6][7][8]

In 1932 Ralph Budd met Edward G. Budd (no relation), an automotive steel pioneer who was founder and president of the Budd Company. Edward Budd was demonstrating his new carbody construction in a prototype rail motorcar built of stainless steel. Stainless steel provided many benefits over traditional wood and hardened steel for railroad carbodies; it was a lighter and stronger material, and its natural silver appearance and resistance to corrosion meant that it would not have to be painted to protect it from the weather. Since the carbody was much lighter than similar cars, it would be able to carry a higher revenue load for the same cost.[6]

The problem with building stainless steel cars was that nobody could find an adequate way to hold the body together. On August 20, 1932, Earl J. Ragsdale, an engineer at the Budd Company, filed a patent application for a "Method and product of electric welding"; on January 16, 1934, the United States Patent and Trademark Office (USPTO) granted US patent 1,944,106 to the Budd Company.[9] Shotwelding, as Ragsdale termed his method, involved automatic control of the timing of individual spot welds. In spot welding, the two pieces of metal that are to be joined are pressed together with an electrode on each side of the joint. A very high electric current is passed through the joint and fuses the two pieces of metal together.[10] If a manual spot weld, which was, then, difficult to time, is held too long, heat will spread from the weld at a middling temperature that weakens the stainless steel unacceptably; Ragsdale's precisely-timed welds solved the problem.[11]

Pioneer Zephyr cab with controls

Another factor in making the Zephyr lighter than conventional trains was that the individual carbodies in the train share their trucks with adjacent cars.[12] In this design by Budd engineer Walter B. Dean, the train was three articulated compartments. On conventional passenger cars, each carbody rode upon a pair of trucks (wheel-axle assembly), with one truck at each end. The articulation not only reduced the number of trucks under the train, but it also dispensed with the need for couplers between each of the carbodies, further reducing the train's weight.[13] It did, however, mean that train lengths could not be easily changed by switching out cars.

The exterior design of the train was left to aeronautical engineer Albert Gardner Dean (Walter Dean's younger brother) who designed the sloping nose shape, with architects Paul Philippe Cret and John Harbeson, devising a way to strengthen and beautify the sides with the train's horizontal fluting.[14][15] On April 15, 1936, Colonel Ragsdale, Walter Dean and Albert Dean, filed patent applications for a "Rail Car Front End Construction". On September 23, 1941 the USPTO granted US patents 2,256,493[16] and 2,256,494[17] to the Budd Company.

The first Zephyr (9900) was completed by the Budd Company on April 9, 1934, powered by an eight-cylinder, 600-horsepower (447 kW), 8-201-A model Winton engine. Like the diesel-electric locomotives that soon displaced the steam locomotive on American railroads, this engine powered an electrical generator; the electricity it generated was then fed to electric traction motors connected to the axles in the train's front truck.[2][5]

The RPO section of the Pioneer Zephyr

The train's engineer sat in a small compartment in the nose of the train, directly in front of the prime mover. Behind the engine in the first carbody was a 30 ft (9.1 m) long railway post office section. The second carbody consisted of a small baggage section and a short buffet and 20-passenger coach section. The third and final carbody in the train, as originally built, was configured as half coach (40-passenger seats) and half observation car (12 passenger seats). As built, the train had 72 seats and could carry 50,000 pounds (22.7 tonnes) of baggage and express freight. This train's official christening occurred on April 18, 1934, at the Pennsylvania Railroad's Broad Street Station in Philadelphia, Pennsylvania.[18]

The Budd Company used the experience learned in building the Zephyr to build similar trains (such as the Flying Yankee) for other railroads, as well as a number of other Zephyrs for the Burlington.

Engine and driveline

9900, and sisters, 9901-9903, were successful as streamliners, but not mechanically. However, despite their shortcomings, 9900 and 9902-9908 were all in service until at least 1954.

Winton 201A diesel engines were used in early EMC designs, and 9900 had an inline eight-cylinder model developing 600 hp at 750 rpm. A marine design, this lightweight engine was successful in diesel-electric submarines, but was ill-suited for the severe service of railroad use and had reliability problems. This engine was replaced by the new EMC 567 series in 1939.

9900 and 9901-9903 were articulated trainsets, with common trucks (Jacobs bogies) between each car. This caused operating problems, as train lengths could not be changed for demand and any single failure affected the entire train. All following power units were separate from their train, although four more articulated carsets were built.

While 9900-9903 were power cars, only one more, the unique 9908, was built. 9904-9907 were locomotives, and their A units had the two 12-cylinder engine layout that the later E-units would use, while their B units had the single 16-cylinder layout of future F-units. After 9908, all Burlington passenger engines were standard production locomotives, except for the cosmetic stainless steel bodywork of the E5s.[19][20]

Promotion: "Dawn-to-Dusk" dash

Cigarette ad showing the train and describing the run in 1934.

To catch the public's attention, this train was not simply rolled out of the factory; it made a dash from one end of the CB&Q, in Denver, to the other, in Chicago. The railroad spared no expense in planning the operations. All other trains along the Zephyr's route were diverted to sidings and the turnouts were spiked into the proper alignment for the Zephyr's run. Track and maintenance of way workers checked every spike and bolt along the train's route to ensure that there would not be any problems, and temporary speed signs were installed along the route to warn the Zephyr's crew of curves that would be dangerous at high speeds.[1] On the day of the dash, every road grade crossing was manned by a flagman to stop automobile traffic ahead of the train and to ensure that the crossing was clear. Stations along the route were protected by local police officers and members of the American Legion and the Boy Scouts of America.[21]

The train left Denver at 07:04 Central Daylight Time and arrived in Chicago at 08:09, 13 hours 5 minutes later, at an average speed of 77 mph (124 km/h). For one section of the run, the train reached a speed of 112.5 mph (181 km/h), close to the world land speed record of 130.6 mph (210.2 km/h) of 1903, which had been achieved in repeated runs on dedicated test track. The non-stop 1,015 mile (1,633 km) trip exceeded the railroad's expectations in being 1 hour 55 minutes faster than was scheduled. Reporters along the route told of the "silver streak" that ran by faster than any other train that normally rode American rails at the time. The Burlington's contemporary passenger trains plied the same distance in around 25 hours.

The passengers, including "Zeph" the burro, that rode the Zephyr on the "Dawn-to-Dusk Dash" gather for a group photo in front of the train after arriving in Chicago on May 26, 1934.

Riding the train were Ralph Budd, Edward G. Budd, H. L. Hamilton, president of the Winton Motor Company (at that time a part of the new General Motors Electro-Motive Division), a number of reporters, some Burlington employees, members of the public, and Zeph, a burro that was contributed by a Colorado newspaper, the Rocky Mountain News, as a mascot for the train.[1] The newspaper had described Zeph to the railroad as a "Rocky Mountain canary" so the train's crew had originally planned only enough space for a birdcage; when they found out it was not a bird, the railroad hastily built a pen in the baggage section and bought some hay for it. When asked about the burro, Ralph Budd replied "why not? One more jackass on this trip won't make a difference."[22]

After the train arrived in Chicago, it traveled a little farther to the 1934 Century of Progress fair (noted in some press articles about the dash as the "Chicago World's Fair") where it was put on public display on opening day.[1] After its display on the Wings of a Century stage, the train was taken on a 31-state, 222-city publicity tour. More than 2 million people saw the train before it entered revenue service.[23]

Part of the tour included a test run between Chicago and Minneapolis–St. Paul a full five hours faster than the Burlington's fastest steam-powered train. Due to the Zephyr's success on this test run, the Burlington immediately ordered two more Zephyr trainsets that were dubbed, the "Twin Zephyrs"; the new trains debuted in April 1935 on this route.

Regular revenue service

Commemorative postal covers that were carried aboard the Pioneer Zephyr for its first revenue run, on November 11, 1934, and as it crossed the one million mile mark, on December 29, 1939.

The Zephyr's power (leading) car was numbered 9900, the baggage-coach combine car 505, and the coach-observation 570. The train was placed in regular service between Kansas City, Missouri, Omaha and Lincoln, Nebraska, on November 11, 1934, replacing a pair of steam locomotives and six heavyweight passenger cars, weighing up to eight times as much as the Zephyr.[23] By June 1935, it proved popular enough to add a fourth car, providing additional coach seating. The fourth car was originally a 40-seat coach number 525, but the following June it was switched to Twin Cities service, then back to the Pioneer Zephyr in December.[12] Car 525 remained on the train until June 1938. Just over five years after it was introduced, the Pioneer Zephyr crossed the one million mile mark in regular service on December 29, 1939, near Council Bluffs, Iowa.

Burlington Zephyr passengers arriving at Chicago's Union Station

Ralph Budd and the Burlington capitalized on the Zephyr's success. However, most passenger trains needed larger capacity. Thus, as the Burlington made a transition to larger diesel-electric locomotives pulling individual passenger cars, new streamlined cars of standard-size were ordered, which quickly became the standard of many railroads. However, Burlington was determined to be the leader, and ordered its large "E" series passenger diesels to also be equipped with matching stainless-steel fluting. Many of the Burlington's long distance named passenger trains began operating under the Zephyr banner, including the Nebraska Zephyr, Twin Cities Zephyr, and perhaps the most famous of the namesake, the California Zephyr.

On the second anniversary of the train's famous dash, the original Zephyr was rechristened the Pioneer Zephyr to distinguish it as the first of the Burlington's growing Zephyr fleet. In 1938, car 525 was replaced by car number 500, a 40-seat buffet/lounge car, to provide light meals. Car number 505, the baggage-coach combine, was rebuilt at this time into a full baggage car, but it kept its original windows.[2][24]

In regular service, the Pioneer Zephyr had its share of accidents. In 1939 it was involved in a head-on collision with a freight train that completely destroyed the cab. The train was rebuilt and re-entered revenue service soon afterward, but the accident strengthened the desire of locomotive designers to move the cab back from the front of the locomotive to above a large nose, as on EMD F-unit and EMD E-unit locomotives.[3]

Since the Pioneer Zephyr was built of stainless steel, which is not as recyclable as aluminum, the train was spared from the metal recycling drives of World War II. By contrast, Union Pacific's M-10000, built of aluminum, was scrapped in 1942 for the war effort, among other reasons.[14][24]

In 1948 and 1949, the Pioneer Zephyr was temporarily removed from service to participate in the Chicago Railroad Fair's "Wheels A-Rolling" pageant. The fair's purpose was to celebrate 100 years of railroad history west of Chicago, and the Pioneer Zephyr's role in the pageant was to highlight the latest strides in railroad technology. It resumed regular passenger operations when the fair ended on October 2, 1949.[25] By 1955 the Pioneer Zephyr's route had been updated to run between Galesburg, Illinois, and Saint Joseph, Missouri; the trainset had been in continual service since 1934, operating over nearly 3 million miles (4.8 million kilometres). The Pioneer Zephyr's last revenue run was a trip from Lincoln, Nebraska, to Kansas City, Missouri, (along the train's regular revenue route) that then continued to Chicago on March 20, 1960.[2] When Amtrak took over passenger rail services in 1971, the legendary Zephyr name was preserved, and the California Zephyr is an Amtrak route in the 21st century.

Use in film

Main article: The Silver Streak
Film poster for The Silver Streak

Press publicity had apparently first coined the term "Silver Streak". The Pioneer Zephyr's famous Denver-Chicago dash served as the inspiration for the 1934 film The Silver Streak starring Charles Starrett.[14][23] In that story, the crew was racing to the Boulder Dam construction site with an iron lung, with only moments to spare. The original Zephyr trainset was used for the exterior shots in the film, while interior scenes were filmed on a soundstage in Hollywood. For the film, the "Burlington Route" nameplate on the train's nose was replaced with one that read "Silver Streak".

Legacy

On May 26, 1960, the 26th anniversary of the "Dawn-to-Dusk" dash, the original Pioneer Zephyr train (car numbers 9900, 505 and 570) was donated to Chicago's Museum of Science and Industry (MSI).[2][14] Car number 500, which operated with the train from 1938, went along with Mark Twain Zephyr trainset 9903 to a party in Mount Pleasant, Iowa, for static display in a town park, but plans for the train's display did not work out; car 500 and the Mark Twain Zephyr are currently stored in Granite City, Illinois and plans are currently underway to display it in Fairfield, Iowa.[26]

In Galesburg, Illinois, which is 162 rail miles from Chicago, the local high school named all its athletic teams the "Galesburg Silver Streaks" in honor of the train.

MSI displayed the Pioneer Zephyr outdoors, with no protection from the weather, until 1994. At that time, the steam locomotive that shared the display space with the Zephyr, Santa Fe #2903, was donated to the Illinois Railway Museum (IRM) at Union, west of Chicago, while MSI prepared a new display location for the Zephyr.[27]

The observation car (rear) end of the Pioneer Zephyr as seen at the Chicago Museum of Science and Industry. Exterior projectors display moving images on the now frosted windows. Viewers inside the car see the rapid motion of passing landscapes and grade crossings and view simulated passengers displayed as talking animated mannequins.

MSI dug a pit in front of the building and built a new display area for the Zephyr, where it could be displayed year-round. In 1998, after the train received a cosmetic restoration by Northern Rail Car in Milwaukee, Wisconsin, the pit was finally ready to receive the train. Rohn Metal Fabricating, known for its expertise in stainless steel fabrication, played a part in the interior restoration of the Zephyr. The Pioneer Zephyr train is still on display at MSI just outside the main entrance from the museum's underground parking area, where it is one of the more popular exhibits.[27]

In addition to the Pioneer Zephyr, two other legacies remain. An operable Nebraska Zephyr train was donated to IRM. There, powered by one of the large "E" series passenger diesels (an EMC E5) with the distinctive and durable stainless-steel fluting, it is still operated on short runs on the museum's substantial trackage, providing train enthusiasts and tourists with an experience reminiscent of the heyday of the Burlington's Zephyr service.[28][29] The Silver Charger, power car of the General Pershing Zephyr, is on display at the Museum of Transportation in St. Louis, and the same train's "diner-parlour and observation car" is now the Silver Star Cafe in Port Hedland, Australia.

Also utilizing the name, the Minnesota Zephyr was a dinner train located in the historic city of Stillwater, Minnesota, although it was not directly associated with the historic Burlington Zephyr fleet.

Dorney Park & Wildwater Kingdom in Allentown, Pennsylvania has a miniature replica train ride called Zephyr which was built in 1935 and helped the park survive the Great Depression.[30]

Models

Due to the Zephyr's place in American railroad history, many model railroaders have built their own versions of the Pioneer Zephyr in miniature. Several model manufacturers are now producing commercial ready-to-run models or kits of the train for modelers to build. This list is ordered by the manufacturer's release date:

See also

References

Notes

  1. ↑ 1.0 1.1 1.2 1.3 "Pioneer Zephyr - A Legendary History". excerpts from the New York Times. Chicago Museum of Science and Industry. May 27, 1934. Archived from the original on February 8, 2005. Retrieved February 24, 2005. Web archive link
  2. ↑ 2.0 2.1 2.2 2.3 2.4 Gordon-Gilmore, Randy (2002). "Pioneer Zephyr". ProtoTrains. Retrieved February 24, 2005.
  3. ↑ 3.0 3.1 Johnston and Welsh, p 15.
  4. ↑ 4.0 4.1 Zimmerman, p. 16.
  5. ↑ 5.0 5.1 Zimmerman, p. 26.
  6. ↑ 6.0 6.1 6.2 "American Experience / Streamliners / People & Events / Ralph Budd". PBS Online / WGBH. 2000. Retrieved February 22, 2005.
  7. ↑ Kisor, p. 16
  8. ↑ Zimmerman, p. 29.
  9. ↑ US patent 1944106, Earl J. W. Ragsdale, "Method and product of electric welding", issued 1934-01-15, assigned to Edward G. Budd Manufacturing Company
  10. ↑ Zimmerman, p. 19.
  11. ↑ "Pioneer without Profit" (profile of Budd), Fortune magazine, February 1937, page 130.
  12. ↑ 12.0 12.1 Johnston and Welsh, p. 20.
  13. ↑ Zimmerman, p. 25.
  14. ↑ 14.0 14.1 14.2 14.3 Johnston and Welsh, p. 16.
  15. ↑ Zimmerman, p. 24.
  16. ↑ US patent 2256493, Earl J. W. Ragsdale & Albert G. and Walter P. Dean, "Rail car front end construction", issued 1941-09-23, assigned to Budd Manufacturing Company
  17. ↑ US patent 2256494, Earl J. W. Ragsdale & Albert G. Dean, "Rail car front end construction", issued 1941-09-23, assigned to Budd Manufacturing Company
  18. ↑ Zimmerman, p. 32.
  19. ↑ Pinkpank, Jerry A (1973). The Second Diesel Spotter’s Guide. Kalmbach Books. pp. 106, 112–113, 117, 121–122,. LCCN 66-22894.
  20. ↑ "Winton 129-6, Cleveland Diesel 278A". General Tug Information. Tugboat Enthusiasts' Society of the Americas. 2007. Retrieved 26 July 2013.
  21. ↑ Zimmerman, p. 37.
  22. ↑ "Pioneer Zephyr, a legendary history - The Dawn To Dusk Club". Chicago Museum of Science and Industry. 2002. Archived from the original on February 9, 2005. Retrieved March 1, 2005.
  23. ↑ 23.0 23.1 23.2 Zimmerman, p. 40.
  24. ↑ 24.0 24.1 Zimmerman, p. 43.
  25. ↑ Chicago Railroad Fair Official Guide Book (1949).
  26. ↑ Lotz, David (Spring 2002). "History of the Mark Twain Zephyr". Rail Merchants International. Retrieved February 27, 2005.
  27. ↑ 27.0 27.1 "The Pioneer Zephyr comes home". Trackside. Retrieved February 25, 2005.
  28. ↑ "History of the IRM: Collections". Illinois Railway Museum. November 25, 2005. Retrieved May 24, 2007.
  29. ↑ "History of the IRM: Restoration". Illinois Railway Museum. November 25, 2005. Retrieved May 24, 2007.
  30. ↑ Dorney Park & Wildwater Kingdom (2006). "Rides: Zephyr". Cedar Fair Entertainment Company. Retrieved June 15, 2006.
  31. ↑ American Flyer Trains consumer catalogs 1934 - 1938
  32. ↑ "Shovelnoses". BPL Brassworks. Retrieved July 13, 2007.
  33. ↑ "Burlington Zephyr". Fine N-Scale Products. 2002. Retrieved July 13, 2007.
  34. ↑ ""HO" and "N" Scale Con-Cor 1934 Pioneer Zephyr". Con-Cor. 2007. Archived from the original on June 21, 2007. Retrieved July 13, 2007.
  35. ↑ "Budd "Shovelnose" Trainsets Delivered!". River Raisin Models. 2007. Archived from the original on May 15, 2007. Retrieved July 13, 2007.
  36. ↑ "Pioneer Zephyr Diesel Passenger Set w/Proto-Soundr 2.0". MTH Electric Trains. Retrieved July 13, 2007.
  37. ↑ "Knight & Sir John". Fisher-Price Inc. 2008. Retrieved March 16, 2008.

Further reading

External links

Wikimedia Commons has media related to Pioneer Zephyr.