Peshawar Electric Power Company

Water and Power Development Authority (WAPDA) was created in 1958 through WAPDA Act, 1958. Prior to this the electricity supply service in Pakistan was undertaken by different agencies, both in public and private sectors, in different areas.The local areas electricity distribution service was being performed by various Regions of WAPDA. Then the Area Electricity Board (AEB) Peshawar, on the eight AEBs in Pakistan, was established under the scheme of Area Electricity Boards in 1982, in order to provide more autonomy and representation to provincial government, elected representatives, industrialists, agriculturalists and other interest groups in functions of the AEBs.Peshawar Area Electricity Board was reorganized into one such corporatized entity under the name of Peshawar Electric Supply Company (PESCO) with effect from 22-03-1998, with the aim of commercialization and eventually privatization.

• Peshawar Electric Supply Company (PESCO), located in Peshawar provides service of power distribution to over 2.6 million consumers of all civil districts of Khyber Pukhtunkhwa, Pakistan. At PESCO networks, we own and maintain Khyber Pukhtunkhwa’s electricity distribution system via 132, 66, 33KV sub-transmission lines, sub-stations and 11KV & 440V low tension lines with distribution transformers that deliver electricity to your home or business.

See also

• List of electric supply companies in Pakistan

Template:MBM ENGINEERING COMPANY Template:Www.mbm-engg.com {{INTRODUCTION

• In-Situ Crankshafts Grinding: Crankshaft without dismantling from the engine, Crankshafts Grinding size is dia 540mm .We have recorded the biggest crankshaft, In-Situ Grinding first time in the Pakistan.

• In-situ Main Line boring: • Metal Stitching: kiln cement grinding raw mill roller. • Metal Spray: • Hydraulic Jack pumping unit 1500ton’s • Hard chrome Plating: • Boiler: spare parts manufacturing • Motor spare parts manufacturing • Engine and Generator spare parts manufacturing • Countries spare parts manufacturing • Turbine and roll grinding dia 150mm to 540mm Length 4876.8mm on machined. • All kind of Casting. • All type of Engineering and Technical Services. • Fabrications: All Kind of Machined Parts Machining, tower, and manufacturing ets. • Purchasing and Sale generator sets. Please feel free to contact us on our telephones or E-mail further clarification Respectfully yours,

Nadeem Nisar Ahmed. M/s,MBM Engineering Company.

Mailing : THE PLAZA K-9, 11-FLOOR, P.C.H.S .BLOCK NO.6 MAIN SHAHRAH-E-FAISAL KARACHI-PAKISTANE-Mail: ahmed@mbm-engg.com 0092-021-34326644 & 55 00923342839848 www.mbm-engg.com}}