Ohio State Route 510
| ||||
|---|---|---|---|---|
 | ||||
| Route information | ||||
| Maintained by ODOT | ||||
| Length: | 7.03 mi[1] (11.31 km) | |||
| Existed: | 1937 – present | |||
| Major junctions | ||||
| South end: |
 SR 101 in Clyde | |||
 US 20 in Clyde | ||||
| North end: |
 US 6 near Bay View | |||
| Location | ||||
| Counties: | Sandusky | |||
| Highway system | ||||
| ||||
State Route 510 (SR 510, OH 510) is a north–south state highway in the northern portion of Ohio. The entirety of State Route 510 lies within Sandusky County. Its southern terminus is at State Route 101 in Clyde, and its northern terminus is at U.S. Route 6 between Fremont and Sandusky.
Route description
State Route 510 runs exclusively within Sandusky County. The highway is not included as a part of the National Highway System.[2]
State Route 510 begins in downtown Clyde at a signalized intersection with State Route 101, where Main Street and Maple Street meet. Following Main Street north from there, the state highway crosses the Norfolk Southern Railway tracks, then passes some homes and then a small commercial district as it arrives at its junction with U.S. Route 20. Continuing north, State Route 510 passes through a residential area, intersecting a few side streets along the way. Departing Clyde heading due north, State Route 510 enters into rural Sandusky County, specifically Green Creek Township, and passes amidst wide-open farmland, with homes appearing every so often along the roadway. State Route 510 meets Bookmeyer Road, then goes on to intersect Sandusky County Road 229, at which point the state highway enters into Riley Township. Further north, State Route 510 passes through respective intersections with County Roads 231 and 233 before arriving at its junction with State Route 412. Just north of there, State Route 510 passes underneath the Ohio Turnpike, which carries Interstate 80 and Interstate 90. North of there, continuing its way through farm country, State Route 510 crosses County Road 247 en route to arriving at its endpoint at U.S. Route 6. Continuing north of U.S. Route 6 after State Route 510 terminates is Brugger Road.[3]
History
In 1937, State Route 510 came into being along the routing between State Route 101 and U.S. Route 6 that it occupies today. No significant changes have taken place to this highway since its inception.[4][5]
Major intersections
The entire route is in Sandusky County.
| Location | mi[1] | km | Destinations | Notes | |
|---|---|---|---|---|---|
| Clyde | 0.00 | 0.00 | SR 101 (Main Street / Maple Street) | ||
| 0.21 | 0.34 | US 20 (McPherson Highway) | |||
| Riley Township | 4.30 | 6.92 |  SR 412 (Castalia Road) | ||
| 7.03 | 11.31 | US 6 / Brugger Road | |||
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
References
- ↑ 1.0 1.1 Ohio Department of Transportation. "Technical Services Straight Line Diagrams" (PDF). Retrieved 2013-08-03.
- ↑ National Highway System: Ohio (PDF) (Map). Federal Highway Administration. December 2003. Retrieved 2010-05-06.
- ↑ Yahoo!; Navteq (2010-05-06). "Overview Map of State Route 510" (Map). Yahoo! Maps. Yahoo!. Retrieved 2010-05-06.
- ↑ Ohio State Map (Map). Ohio Department of Transportation. 1936.
- ↑ Ohio State Map (Map). Ohio Department of Transportation. 1937.
External links
Route map: Bing