Northwest Ranger

Ranger
The prototype Northwest Ranger
Role Light aircraft
National origin Canada
Manufacturer Northwest Industries
Introduction 1968
Status Probably prototypes only
Produced 1968-1972
Number built At least four
Developed from Aermacchi AL-60

The Northwest Ranger was a Canadian bush aircraft that was under development by Northwest Industries (NWI) of Edmonton, Alberta between 1968-1972. The aircraft was a type certified design, and intended to be supplied as a complete ready-to-fly-aircraft.[1][2][3]

Design and development

The Ranger was a development of the Aermacchi AL-60, which itself was based upon the Lockheed Model 60. NWI established its reputation as an aircraft overhauler and maintenance facility, but decided to enter the aircraft manufacturing business by buying the rights to the AL-60 in 1968.[1][2][3]

The aircraft featured a strut-braced high-wing, a six to eight seat enclosed cabin and optional fixed tricycle landing gear, conventional landing gear, floats or skis and a single engine in tractor configuration. The Ranger differed from the AL-60 in having main landing gear leg fairings and Hoerner wing tips.[1][2][3]

The Ranger's wing employed large flaps. Approved floats were Edo Aircraft Corporation models and both straight skis and Genaire Limited Canada Fluidyne Engineering wheel skis could also be fitted. Cabin access was through the small left front pilot door or a large cabin passenger and freight door.[1]

The initial version proposed used the 400 hp (298 kW) Lycoming IO-720 A1A engine, but this did not provide adequate float performance and in 1970 was replaced by a 520 hp (388 kW) Lycoming IO-720 B1A powerplant and the version termed the Ranger C-6 to distinguish it from the last production Aermacchi AL-60C-5 model. The increased power gave a take-off distance to 50 ft (15 m) of 915 ft (279 m) and a landing distance from 50 ft (15 m) of 920 ft (280 m).[1][2][3]

With the 520 hp (388 kW) engine the aircraft had an empty weight of 2,848 lb (1,292 kg) and a gross weight of 4,700 lb (2,100 kg), giving a useful load of 1,852 lb (840 kg). With full fuel of 91 U.S. gallons (340 L; 76 imp gal) the payload was 1,306 lb (592 kg).[1]

The initial version was prototyped in 1968 but a long period of performance and user trials followed which resulted in design changes and the improved C-6 model, prior to production commencing. Development had ended by 1972, but it is not clear how many were completed, although at least four bore Canadian registration at one time. The fate of the NWI prototype CF-XED is not known and it is likely that no Rangers exist today.[1][2][3] As of September 2013 none remain registered with Transport Canada or with the Federal Aviation Administration in the United States.[4][5]

Variants

Ranger
Initial proposed version with 400 hp (298 kW) Lycoming IO-720 A1A engine. Generally similar to the Italian Aermacchi AL-60C-5 model.[2][3]
Ranger C-6
Improved proposed version with an upgraded 520 hp (388 kW) Lycoming IO-720 B1A engine.[2][3]

Specifications (Ranger)

Data from Plane and Pilot and Jane's All The World's Aircraft[1][2][3]

General characteristics

Performance

References

  1. ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Plane and Pilot: 1978 Aircraft Directory, page 58. Werner & Werner Corp, Santa Monica CA, 1977. ISBN 0-918312-00-0
  2. ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 Taylor, John (ed): Jane's All The World's Aircraft 1969-1970, page 24. Jane's Yearbooks, 1969.
  3. ↑ 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Taylor, John (ed): Jane's All The World's Aircraft 1970-1971, page 26. Jane's Yearbooks, 1970.
  4. ↑ Federal Aviation Administration (25 September 2013). "Make / Model Inquiry Results". Retrieved 25 September 2013.
  5. ↑ Transport Canada (25 September 2013). "Canadian Civil Aircraft Register". Retrieved 25 September 2013.

External links