No load power
No load power consumption is the electric power consumed by a power charger when it is plugged into a wall socket but without the mobile phone or other handheld device being connected. Furthermore, it must be switched on at the plugs.
This wasted power is often incorrectly called standby power, which actually refers to the power consumed by a power adapter when a device such as a TV, DVD recorder or audio system is in a low-power mode. The power consumed in standby mode is used to maintain system functions such as responding to remote control, or a digital clock, whereas true no-load energy as consumed in a power charger does nothing of use.
Consequences
The no-load power contribution to a country’s household energy demands is thought to be considerable.[1] The average number of handsets per capita is frequently more than one in many countries , the proportion of chargers left accidentally or deliberately plugged in is thought to be significant and with current designs over 60% of a mobile phone’s energy use is wasted as no-load .
As a result mobile phone manufacturers have become increasingly focused on reducing the no-load consumption of their power chargers. For example in 2002, a typical design might use about 3 watts on average and in 2007 less than 0.5 watts.[1]
For the purposes of estimating consumption, no-load and standby power are often lumped together, and it is difficult to distinguish them in statistics. Estimates of the magnitude are discussed with numerical detail in the article on standby power. Before energy-wastage initiatives were implemented, it was estimated that power used by devices plugged in but not in active use was about 10% of domestic electric energy power consumption, the small magnitude of the power drawn being offset by 24-hour drain.
Policies to reduce no load power
Energy Star, the EU code of conduct on standby and other mandatory and regulatory standards are encouraging manufacturers to make further reductions in no-load energy demands.
For example: under the Energy Star V2.0 (level V) voluntary standard introduced in November 2008, the no-load consumption of a typical 4.25 W charger has to be less than 0.3 W. The EU code of conduct version 4, introduced in January 2009, has a limit of 0.25 W for mobile handheld battery-driven applications, reducing to 0.15 W in January 2011. Complete list of national and international standards.
Rating system
In November 2008, the world’s five largest mobile phone makers – Nokia, Samsung, LG Electronics, Motorola and Sony-Ericcson - announced their own five star energy rating system to help consumers more easily identify the most energy-efficient chargers. Chargers are being labeled with no stars for no-load consumptions exceeding 0.5 W, up to five stars for consumption of not more than 0.03 W.