Neusis construction

Neusis construction

The neusis is a geometric construction method that was used in antiquity by Greek mathematicians.

Geometric construction

The neusis construction (from Greek νεῦσις from νεύειν neuein "incline towards"; plural: νεύσεις neuseis) consists of fitting a line element of given length (a) in between two given lines (l and m), in such a way that the line element, or its extension, passes through a given point P. That is, one end of the line element has to lie on l, the other end on m, while the line element is "inclined" towards P.

A neusis construction might be performed by means of a 'neusis ruler': a marked ruler that is rotatable around the point P (this may be done by putting a pin into the point P and then pressing the ruler against the pin). In the figure one end of the ruler is marked with a yellow eye with crosshairs: this is the origin of the scale division on the ruler. A second marking on the ruler (the blue eye) indicates the distance a from the origin. The yellow eye is moved along line l, until the blue eye coincides with line m. The position of the line element thus found is shown in the figure as a dark blue bar.

Point P is called the pole of the neusis, line l the directrix, or guiding line, and line m the catch line. Length a is called the diastema (διάστημα; Greek for "distance").

Neusis trisection of an angle θ > 135° to find φ = θ/3, using only the length of the ruler. The radius of the arc is equal to the length of the ruler. For angles θ < 135° the same construction applies, but with P extended beyond AB.

Use of the neusis

Neuseis have been important because they sometimes provide a means to solve geometric problems that are not solvable by means of compass and straightedge alone. Examples are the trisection of any angle in three equal parts, or the construction of a regular heptagon or tridecagon. Mathematicians such as Archimedes of Syracuse (287–212 BC) freely used neuseis. Nevertheless, gradually the technique dropped out of use.

Waning popularity

T. L. Heath, the historian of mathematics, has suggested that the Greek mathematician Oenopides (ca. 440 BC) was the first to put compass and straightedge constructions above neuseis. The principle to avoid neuseis whenever possible, may have been spread by Hippocrates of Chios (ca. 430 BC), who originated from the same island as Oenopides, and who wasas far as we knowthe first to write a systematically ordered geometry textbook. One hundred years after him Euclid too shunned neuseis in his very influential textbook, The Elements.

The next attack on the neusis came when, from the fourth century BC, Plato's idealism gained ground. Under its influence a hierarchy of three classes of geometrical constructions was developed. Descending from the "abstract and noble" to the "mechanical and earthly", the three classes were:

  1. constructions with straight lines and circles only (compass and straightedge);
  2. constructions that in addition to this use conic sections (ellipses, parabolas, hyperbolas);
  3. constructions that needed yet other means of construction, for example neuseis.

In the end the use of neusis was deemed acceptable only when the two other, higher categories of constructions did not offer a solution. Neusis became a kind of last resort that was invoked only when all other, more respectable, methods had failed. Using neusis where other construction methods might have been used, was branded by the late Greek mathematician Pappus of Alexandria (ca. 325 AD) as "a not inconsiderable error".

See also

References

External links