MacWorks XL
MacWorks XL was an Apple Lisa software program which shipped with the Macintosh XL. It allowed 64K Apple Macintosh ROM emulation so the Macintosh XL could run Mac OS programs.
History
Soon after the debut of the Macintosh, which sold over 50,000 units in the first 100 days compared to only a few thousand Lisas during its entire first year, it became clear to Apple the Lisa (then Lisa 2/10) would benefit from the ability to run the Macintosh system software as well as reduce the development platform resources required to maintain two separate operating systems.
In April 1984, Apple introduced MacWorks v1.0 for the Lisa.[1] Essentially it allowed the Lisa to run a Macintosh environment from a floppy disk, but did not support a hard disk environment. By the fall, Apple had introduced versions 2.0 & 3.0 which allowed MacWorks to run from the Lisa's internal Widget or attached ProFile hard disk. With the introduction of the re-branded Macintosh XL in January 1985, MacWorks was likewise renamed for the release.
Features
MacWorks XL shipped on two diskettes. The first booted the Lisa into the Mac OS bootloader. When that process completed, the system displayed an entire white screen, ejected the first disk, and displayed the usual blinking question mark (but with a Macintosh XL graphic below) to indicate that a boot volume (the other disk) was needed. Upon insertion of the second disk, titled "MacWorks XL System Disk", the Lisa would boot Macintosh System 5 (Mac OS 5 in modern nomenclature).
When the Lisa was discontinued, Sun Remarketing continued development of the MacWorks environment under license up to the release of MacWorks Plus 1.1 (which supports System Software 6). Dafax Processing Corp. with the assistance of Query Engineering, Inc. then further developed the environment to MacWorks Plus II which will support up to System 7.5 along with all other late model Motorola 68000-based Macs.
Timeline of Macintosh Operating Systems
 |
| A graphical timeline of Macintosh models |
Timeline of Lisa models
