M12 Gun Motor Carriage

155mm Gun Motor Carriage M12

M12 firing across the Moselle River in France, 1944.
Type Self-propelled gun
Place of origin  United States
Service history
Wars World War II
Production history
Designed 1942
Number built 100
Variants Cargo Carrier M30
Specifications
Weight 26 tons
Length 6.73 m (22 ft 1 in)
Width 2.67 m (8 ft 9 in)
Height 2.70 m (8 ft 10 in)
Crew 6 (Commander, driver, 4x gun crew) with remaining gun crew in M30
Main
armament
 155 mm M1917/18 M1 gun
10 rounds
Secondary
armament
 .50 cal (12.7 mm) Browning M2 machine gun
Engine Wright (Continental) R975 EC2
340 hp
Suspension vertical volute spring
Operational
range
 220 km (140 mi)
Speed 38 km/h (19 km/h) off road

The 155 mm Gun Motor Carriage M12 was a U.S. self-propelled gun developed during the Second World War. It mounted a 155 mm gun derived from the French "155 mm GPF" gun.

Development

The idea for the M12 was first proposed in 1941 and the pilot - T6 GMC - built and tested in early 1942. The Army Ground Force initially rejected the design as unnecessary but after the Artillery Board supported the Ordnance Department 100 were authorized and built. These were used for training.[1]

Description

The M12 was built on the chassis of the M3 Lee tank. It had an armored driver's compartment shared with the commander, but the gun crew were located in an open topped area at the back of the vehicle. The engine was moved forward to the center of the vehicle and most vehicles used M4 bogies with trailing return rollers.[1] It mounted a 155 mm gun M1917, M1917A1 or M1918 M1, depending upon availability, a weapon derived from the nearly identical French 155 mm GPF gun of World War I vintage. Limited storage space meant that only 10 projectiles and propellant charges could be carried on the vehicle.

An earth spade (similar to a bulldozer blade) at the rear was employed to absorb recoil. This layout—large gun mounted in an open mount at the rear, with a spade—was the pattern adopted for many years by other heavy self-propelled artillery.

Production

Only 100 vehicles were built: 60 in 1942 and a further 40 in 1943.

Derivatives

T14/M30 cargo carrier

Given the limited ammunition carried in the M12, a support vehicle based on the same chassis was produced as the Cargo Carrier M30 to transport the gun crew and additional ammunition.

Identical except for the gun and recoil spade, it could carry 40 rounds of 155 mm ammunition, and was armed with a .50-caliber Browning M2 machine gun.[1] in a ring mount.

In operational conditions, the M12 and M30 would serve in pairs.[1]

Use

During 1943, the vehicles were used for training or put into storage. Before the invasion of France, 74 M12s were overhauled in preparation for combat operations.[1] They were employed successfully throughout the campaign in North-West Europe. Although designed primarily for indirect fire, during assaults on heavy fortifications, the M12s were sometimes employed in a direct-fire role, such as in the Allied assault on the Siegfried Line, where the M12 earned its nickname "Doorknocker" thanks to the 155mm cannon's ability to pierce seven feet of concrete at ranges up to 2,000 yards (1,830 meters).

In 1945, the M12 was complemented in Europe by the M40 Gun Motor Carriage, designed on a late-war M4 Sherman chassis. Postwar, the M12 was retired from service and replaced by the M40.

Surviving vehicle

The sole surviving M12 GMC is displayed at the Fort Sill museum,[2] it was stored at the United States Army Ordnance Museum in Aberdeen, Maryland, USA, before being transferred to Fort Sill in November 2010.

See also

References

Notes

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Chamberlain & Ellis British and American Tanks of World War II p144
  2. ↑ http://sill-www.army.mil/famuseum/

Bibliography

Further reading

Vehicle material
Gun material

External links