Low-alcohol beer

Low-alcohol beer (also called light beer, non-alcoholic beer, small beer, small ale, or near-beer) is beer with low alcohol content or no alcohol, which aim to reproduce the taste of beer without the inebriating effects of standard alcoholic brews. Most low-alcohol beers are lagers, but there are some low-alcohol ales.

In the United States, beverages containing less than 0.5% alcohol by volume (ABV) were legally called non-alcoholic, according to the now-defunct Volstead Act. Because of its very low alcohol content, non-alcoholic beer may be legally sold to minors in many American states.

In the United Kingdom, the following definitions apply by law (correct as of May 2007):^[1]

• No alcohol or alcohol-free: not more than 0.05% ABV
• Dealcoholised: over 0.05% but less than 0.5% ABV
• Low-alcohol: not more than 1.2% ABV

In some parts of the European Union, beer must contain no more than 0.5% ABV if it is labelled "alcohol-free".

In Australia, the term "light beer" refers to any beer with less than 3% alcohol.

Spain is the main consumer and producer of low-alcohol beer.^[2]

History

Low-alcoholic brews such as small beer date back to at least Medieval Europe, where it served as a less risky alternative to water (which often was polluted by feces and parasites) and less expensive than the full strength brews used at festivities. In the more modern forms, the temperance movements and general regard of certain tasks like driving being unsuitable when intoxicated led to the development of beers which could be drunk without intoxicating effects.

In the United States, the conceptualization of non-alcohol brews took place during Prohibition according to John Naleszkiewicz. President Wilson had proposed limiting the alcohol content in malt beverages to 2.75% in 1917 in an effort to appease avid prohibitionists. In 1919 Congress approved the Volstead Act, which limited the alcohol content of any beverage to less than 0.5%. These beverages became known as tonics and many breweries began brewing these extremely low alcohol content beverages in order to keep from going out of business during Prohibition. Due to the fact that removing the alcohol from the beer requires the addition of one simple step, many breweries saw this as an easy transition. In 1933, when Prohibition was repealed, removing this single step again was easily done by many breweries.^[3]

By the dawn of the 21st century, alcohol-free beer has seen a rise in popularity in the Middle East (which now makes up a third of the market).^[4] Part of the reason why it has grown in popularity is that Islamic scholars issued fatwas that permitted the consumption of beer so long as large quantities could be consumed without getting drunk.^[5]

Pros and cons

There are both up sides and down falls to converting traditional brews to non-alcoholic brews. Positive aspects of converting standard brews to non-alcoholic brews include the ability to drive after consuming several drinks, the reduction of kidney/liver damage, and less intense hangover symptoms .^[6] Despite these benefits there are also aesthetic downfalls to the beverages. Some common complaints of non-alcoholic brews include a loss of flavor, addition of one step in the brewing process, very sugary taste, and a shorter shelf life. Along with aesthetic shortcomings of non-alcoholic brews, they also raise serious legal implications. Local governments in some states like Pennsylvania prohibit the sale of these non-alcoholic brews to persons under the age of 21. A study conducted by the department of psychology at Indiana University claimed “Because non-alcoholic beer provides sensory cues that simulate alcoholic beer, this beverage may be more effective than other placebos in contributing to a credible manipulation of expectancies to receive alcohol”,^[7] making people feel "drunk" when they physically are not.

Categories

Light (reduced alcohol) beer

Light beer is beer that is reduced in alcohol content or in calories, compared to regular beer. The spelling "lite beer" is also commonly used.

Light beers may be chosen by beer drinkers who wish to manage their alcohol consumption or their calorie intake. However, these beers are sometimes criticized^[8] for being less flavorful than full-strength beers, being "watered down" (whether in perception or in fact), and thus advertising campaigns for light beers generally advertise their retention of flavor.

In Australia, regular beers have approximately 5% ABV; reduced-alcohol beers have 2.2%–3.2%.

In Canada, a reduced-alcohol beer contains 2.6%–4.0% ABV, and an “extra-light” beer contains less than 2.5% ABV.^[9]

In the United States, most reduced-alcohol beers, including Bud Light, Coors Light, and Miller Lite have 4.2% ABV.^[8] This is a 16% reduction in alcohol compared to beer that has 5% ABV.

In Sweden, low alcohol beer is either 2.8% or 3.5% and can be purchased in a regular supermarket whereas regular strength beers of above 3.5% must be purchased at the Systembolaget

Low-point beer

Low-point beer, which is often known in America as "three-two beer" or "3 point 2 brew", is beer that contains 3.2% alcohol by weight (equivalent to 4.2% ABV).

The term "low-point beer" is unique to the United States, where some states limit the sale of beer, but beers of this type are also available in countries (such as Sweden and Finland) that tax or otherwise regulate beer according to its alcohol content. In Sweden, beer containing up to 3.5% ABV (called Folköl or "Peoples Beer") may be legally sold in any convenience store to people over 18 years of age, whereas stronger beer may only be sold in state-run liquor stores to people older than 20. In addition, businesses selling food for on-premises consumption do not need an alcohol license to serve 3.5% beer. Virtually all major Swedish brewers, and several international ones, in addition to their full-strength beer, make 3.5% folköl versions as well.

In the United States, 3.2 beer was the highest ABV content allowed to be produced legally for nine months in 1933. As part of his New Deal, President Franklin D. Roosevelt signed a 3.2 beer law that repealed the Volsted Act on March 22, 1933. In December 1933, the Twenty-first Amendment to the United States Constitution was passed, negating the federal government's power to regulate the sale of alcoholic beverages, though states retained the power to regulate.^[10]

After the repeal of Prohibition, a number of state laws prohibiting the sale of intoxicating liquors remained in effect. As these were repealed, they were first replaced by laws limiting the maximum ABV content allowed for sale as 3.2. To this day, the states of Colorado, Kansas, Minnesota, Oklahoma, and Utah permit general establishments such as supermarket chains and convenience stores to sell only low-point beer.^{[11][12][13][14][15]} In these states, all alcoholic beverages containing more than 3.2% alcohol by weight (ABW) must be sold from state-licensed liquor stores. Oklahoma additionally requires that any beverage containing more than 3.2% ABW must be sold at normal room temperature.^[16]

Missouri also has a legal classification for low-point beer, which it calls "nonintoxicating beer".^[17] Unlike Colorado, Kansas, Minnesota, Oklahoma, and Utah, however, Missouri does not limit supermarket chains and convenience stores to selling only low-point beer. Instead, Missouri's alcohol laws permit grocery stores, drug stores, gas stations, and even "general merchandise stores" (a term that Missouri law does not define) to sell any alcoholic beverage;^[18] consequently, 3.2% beer is rarely sold in Missouri.

Near beer

Originally, "near beer" was a term for malt beverages containing little or no alcohol (less than 0.5% ABV), which were mass-marketed during Prohibition in the United States. Near beer could not legally be labeled as "beer" and was officially classified as a "cereal beverage".^[19] The public, however, almost universally called it "near beer".

The most popular "near beer" was Bevo, brewed by the Anheuser-Busch company. The Pabst company brewed "Pablo", Miller brewed "Vivo", and Schlitz brewed "Famo". Many local and regional breweries stayed in business by marketing their own near-beers. By 1921 production of near beer had reached over 300 million US gallons (1 billion L) a year (36 L/s).

A popular illegal practice was to add alcohol to near beer. The resulting beverage was known as spiked beer or needle beer,^[20] so called because a needle was used to inject alcohol through the cork of the bottle or keg.

Food critic and writer Waverley Root described the common American near beer as "such a wishy-washy, thin, ill-tasting, discouraging sort of slop that it might have been dreamed up by a Puritan Machiavelli with the intent of disgusting drinkers with genuine beer forever."^[21]

Today, the term "near beer" has been revived to refer to modern non-alcoholic beer.

A drink similar to "near beer", "bjórlíki" was quite popular in Iceland before alcoholic beer was made legal in 1989. The Icelandic variant normally consisted of a shot of vodka added to a half-a-litre glass of light beer.

Small beer

Look up small beer in Wiktionary, the free dictionary.

Small beer (also, small ale) is a beer/ale that contains very little alcohol. Sometimes unfiltered and porridge-like, it was a favoured drink in Medieval Europe and colonial North America as opposed to the often polluted water and the expensive beer used for festivities. Small beer was also produced in households for consumption by children and servants at those occasions.

However, small beer/small ale can also refer to a beer made of the "second runnings" from a very strong beer (e.g., scotch ale) mash. These beers can be as strong as a mild ale, depending on the strength of the original mash. (Drake's 24th Anniversary Imperial Small Beer was expected to reach above 9.5% avb.^[22]) This was done as an economy measure in household brewing in England up to the 18th century and is still done by some homebrewers. One commercial brewery, San Francisco's Anchor Brewing Company, also produces their Anchor Small Beer using the second runnings from their Old Foghorn Barleywine. The term is also used derisively for commercially produced beers which are thought to taste too weak.

Non-alcoholic beer

Non-alcoholic beer or alcohol free beer contains 0.0% ABV. As such, it is permitted by Islam, and alcohol-free beers such as Holsten, Barbican and Moussy are often available in stores and restaurants that cater to an Islamic customer base. They are also popular in countries that enforce alcohol prohibition, such as Saudi Arabia, Kuwait and Iran. They are often available with added flavors such as apple, strawberry, and peach. The Middle East accounts for almost a third of worldwide sales of alcohol-free beer.^[5]

Legal drinking age in the US

Beers that are labeled "non-alcoholic" still contain a very small amount of alcohol. Thus, some US states require the purchaser to be of a legal drinking age. Exceptions include:

• According to Michigan law, a person must be 18 or older to purchase non-alcoholic beer.
• In Texas, the law does not prohibit minors from consuming or buying non-alcoholic beer, but the law does specify that a beverage containing more than one half of one percent alcohol by volume is an alcoholic beverage and thus will follow the same restrictions as regular beer.^[23]
• In Minnesota, non alcoholic beer (under 0.5% ABV) does not fit in the category that the state defines as an alcoholic beverage and can be purchased by those under the legal drinking age.^[24]
• In Wisconsin, the law does not regulate non-alcoholic beer (less than 0.5% ABV), and it can be purchased without any age restriction.
• In New Jersey, the law governs only beverages of at least 0.5% ABV.
• In Illinois, beverages with under 0.5% ABV are not governed by the Illinois Liquor Control Act and can be purchased and consumed by minors.^[25]

In Sweden, beer below or equaling 2.25% ABV (lättöl) is not legally subject to age restrictions;^[26] however, some stores voluntarily opt out from selling it to minors anyway.^[27]

Brewing process

According to the Birmingham Beverage Company, the basic brewing process of traditional brews consists of eight basic steps, nine for brewing non-alcoholic brews.^[28]

1. Malting- Malting is the first step, during this step barley is prepared by soaking it in water and allowing the grain to germinate “sprout”. This allows the tough starch molecules to be softened and begin to convert them to sugars. Next the sprouts are dried in a kiln; the temperature at which the sprouts are dried will affect the flavor of the finished brew.
2. Milling- Next the malted grain is ground to a corn meal like consistency, which allows the sugars and remaining starches to be more easily released when mixed with water.
3. Mashing-Mashing is when the finely ground malted grain is mixed with water and pulverized. By pulverizing the slurry most of the remaining starches are converted to sugars due to enzymes present in the malt and the sugars then dissolve into the water. The mix is gradually heated to 75℃(162℉) in what is called a mash tun. The slurry is then filtered to remove the majority of particulates. This filtered sugary liquid is called Wort.
4. Brewing- During the actual brewing the wort is brought to a boil for roughly 1–2 hours. During this time, other grains that will contribute flavor, color, and aroma to the brew are added. Boiling allows for several chemical reactions to occur and reduces the water content in the wort, condensing it.
5. Cooling- The wort is filtered to remove the majority of the grains and hops and then immediately cooled to allow the yeast to survive and grow in the next step.
6. Fermenting- During the fermentation step the cooled wort is saturated with air and yeast is added within the fermentation tank. Different strains of yeast will create different styles of beer. This step takes around ten days.
7. Maturation — The freshly fermented un-carbonated beer is then placed into a conditioning tank and, in a similar process to wine making, is allowed to age. If this step is rushed the beer will have an off flavor (acetaldehyde) that beer experts sometimes refer to as "green beer" because of its resemblance to green apples.^[29][30] During this process of aging, the majority of the residual particulates will settle to the bottom of the tank.
   1. Between the seventh and eighth step, the brew can be converted to non-alcoholic beer.
8. Finishing — Finally, the brewer is ready to finish the beer. The beer is filtered one last time; it is then carbonated and moved into a storage tank for either bottling or kegging.

How low-alcohol beer is made

Low-alcohol beer starts out as regular alcoholic beer, which is then cooked in order to evaporate the alcohol. This is possible because alcohol has a lower boiling point than water, making it easier to boil off. As opposed to water, which boils at 100 °C (212 °F), alcohol will boil at 78.3 °C (173.5 °F).^[31] The alcohol is then allowed to escape and the remaining liquid is used, essentially the opposite of distillation. Most modern breweries also utilize vacuum evaporation to preserve flavor and speed up the boiling process. In essence, the beer is placed under a light vacuum to facilitate the alcohol molecules going into gaseous phase. If a sufficient vacuum is applied, it may not even be necessary to cook the beer.

An alternative process called reverse osmosis does not require heating. The beer is passed through a filter with pores small enough that only alcohol and water (and a few volatile acids) can pass through. The alcohol is distilled out of the alcohol-water mix using conventional distillation methods. After adding the water and remaining acids back into the syrupy mixture of sugars and flavor compounds left on the other side of the filter, the process is then complete.^[32]

How non-alcoholic beer is made

The conversion from a traditional alcoholic beer to a non-alcoholic beer takes place after the seventh step and preceding the finishing step. The un-carbonated beer is brought up to the boiling point of alcohol. Alcohol boils around 78.3 °C (173.5 °F).^[3][31] This temperature will vary slightly with altitude “barometric pressure”; higher temperature at lower altitude and lower temperature at higher altitude. Another method of removing the alcohol is to decrease the pressure so the alcohol boils at room temperature. This is the preferred method because the addition of heat this late in the brewing process can greatly affect the flavor of the brew. If brewers decide to convert their brew to a non-alcoholic brew they must consider the volume of liquid they have lost from the removal of the alcohol. Typically the volume is reduced by roughly 4%, to compensate simply add water. Another tip would be avoiding using corn sugars; corn sugars simply increase the alcohol content without adding to the flavor or body of the beer.^[3] Once the alcohol is removed proceed with the normal finishing process where the beer is carbonated and bottled.

See also

• Alcohol by volume
• Beer
• Kvass
• Malzbier
• Small beer

References