Las Brisas Mohawk

Mohawk
Role Homebuilt aircraft
National origin United States
Manufacturer Las Brisas Sales
Status Plans no longer available (2014)
Unit cost
US$229.00 (plans only, 1998)
Developed from Avid Flyer

The Las Brisas Mohawk is an American homebuilt aircraft that was designed and produced by Las Brisas Sales of Ozark, Missouri. When it was available the aircraft was supplied in the form of plans for amateur construction.[1]

Design and development

Based upon the Avid Flyer, which it greatly resembles, the Mohawk features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cockpit accessed via doors, fixed conventional landing gear and a single engine in tractor configuration.[1]

The aircraft is made from metal tubing, with its flying surfaces and fuselage covered doped aircraft fabric. Its 30.00 ft (9.1 m) span wing features Junkers flaperons, has a wing area of 124.5 sq ft (11.57 m2) and is supported by "V" struts with jury struts. The plans specify standard hydraulic brakes, a steerable tailwheel and wings that fold for ground transport or storage. The standard engine used is the 50 hp (37 kW) Rotax 503 two-stroke powerplant, which gives a standard day, sea level take-off distance of 100 ft (30 m) and a landing roll of 150 ft (46 m).[1]

The Mohawk has a typical empty weight of 450 lb (200 kg) and a gross weight of 1,000 lb (450 kg), giving a useful load of 550 lb (250 kg). With full fuel of 12 U.S. gallons (45 L; 10.0 imp gal) the payload for pilot, passenger and baggage is 478 lb (217 kg).[1]

The manufacturer estimates the construction time from the supplied plans as 900 hours. In 1998 the designer indicated that the aircraft could be completed for US$6,500 excluding labor.[1]

Specifications (Mohawk)

Data from AeroCrafter[1]

General characteristics

Performance

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 193. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1